The DISNY facility for sub-cooled flow boiling performance analysis of CRUD deposited zirconium alloy cladding under pressurized water reactor condition: Design, construction, and operation
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The CRUD on the fuel cladding under the pressurized water reactor (PWR) operating condition causes several issues. The CRUD can act as thermal resistance and increases the local cladding temperature which accelerate the corrosion process. The hideout of boron inside the CRUD results in axial offset anomaly and reduces the plant's shutdown margin. Recently, there are efforts to revise the acceptance criteria of emergency core cooling systems (ECCS), and additionally require the modeling of the thermal resistance effect of the CRUD during the performance analysis. There is an urgent need for the evaluation of the effect of the CRUD deposition on the cladding heat transfer under PWR operating conditions, but the experimental database is very limited. The experimental facility called DISNY was designed and constructed to analyze the CRUD-related multi-physical phenomena, and the performance analysis of the constructed DISNY facility was conducted. The thermal-hydraulic and water chemistry conditions to simulate the CRUD growth under PWR operating conditions were established. The design characteristics and feasibility of the DISNY facility were validated by the MARS-KS code analysis and separate performance tests. In the current study, detailed design features, design validation results, and future utilization plans of the proposed DISNY facility are presented.
Abstract
The CRUD on the fuel cladding under the pressurized water reactor (PWR) operating condition causes several issues. The CRUD can act as thermal resistance and increases the local cladding temperature which accelerate the corrosion process. The hideout of boron inside the CRUD results in axial offset anomaly and reduces the plant's shutdown margin. Recently, there are efforts to revise the acceptance criteria of emergency core cooling systems (ECCS), and additionally require the modeling of the thermal resistance effect of the CRUD during the performance analysis. There is an urgent need for the evaluation of the effect of the CRUD deposition on the cladding heat transfer under PWR operating conditions, but the experimental database is very limited. The experimental facility called DISNY was designed and constructed to analyze the CRUD-related multi-physical phenomena, and the performance analysis of the constructed DISNY facility was conducted. The thermal-hydraulic and water chemistry conditions to simulate the CRUD growth under PWR operating conditions were established. The design characteristics and feasibility of the DISNY facility were validated by the MARS-KS code analysis and separate performance tests. In the current study, detailed design features, design validation results, and future utilization plans of the proposed DISNY facility are presented.
참고문헌 (51)
- Jei-Won Yeon, "Chemical analysis of fuel crud obtained from Korean nuclear power plants", Journal of Nuclear Materials, 404(2), pp.160~164 (2010), Elsevier BV[DOI]
- J. Deshon, "Pressurized water reactor fuel crud and corrosion modeling", JOM, 63, pp.64~72 (2011)
- M.P. Short, "Multiphysics modeling of porous CRUD deposits in nuclear reactors", Journal of Nuclear Materials, 443(1-3), pp.579~587 (2013), Elsevier BV[DOI]
- P. Cohen, "Heat and mass transfer for boiling in porous deposits with chimenys", AlChe Symphsium Series, 70, pp.71~80 (1972)
- C. Pan, "Concentration levels of solutes in porous deposits with chimneys under WICK boiling conditions", Nucl. Eng. Des, 99, pp.317~327 (1987)
- D.Y. Yeo, "Modeling heat transfer through chimney-structured porous deposit formed in pressurized water reactors", International Journal of Heat and Mass Transfer, 108, pp.868~879 (2017), Elsevier BV[DOI]
- Jim Henshaw, "A model of chemistry and thermal hydraulics in PWR fuel crud deposits", Journal of Nuclear Materials, 353(1-2), pp.1~11 (2006), Elsevier BV[DOI]
- Inam ul Haq, "Modelling heat transfer and dissolved species concentrations within PWR crud", Nuclear Engineering and Design, 241(1), pp.155~162 (2011), Elsevier BV[DOI]
- N. Cinosi, "The effective thermal conductivity of crud and heat transfer from crud-coated PWR fuel", Nuclear Engineering and Design, 241(3), pp.792~798 (2011), Elsevier BV[DOI]
- 서승진, "BOTANI: High-fidelity Multiphysics Model for Boron Chemistry in CRUD Deposits", Nuclear Engineering and Technology, 53(5), pp.1676~1685 (2021), 한국원자력학회[DOI]
- D.Y. Yeo, "Modeling film boiling within chimney-structured porous media and heat pipes", International Journal of Heat and Mass Transfer, 124, pp.576~585 (2018), Elsevier BV[DOI]
- Miaomiao Jin, "Multiphysics modeling of two-phase film boiling within porous corrosion deposits", Journal of Computational Physics, 316, pp.504~518 (2016), Elsevier BV[DOI]
- P. Saha, "Issues and future direction of thermal-hydraulics research and development in nuclear power reactors", Nuclear Engineering and Design, 264, pp.3~23 (2013), Elsevier BV[DOI]
- PWR Axial Offset Anomaly (AOA) Guidelines, Revision 1, "J. Deshon", ~ (2004)
- R. Hu, "CONSIDERING THE THERMAL RESISTANCE OF CRUD IN LOCA ANALYSIS", Transaction of the American Nuclear Society, 101, pp.590~592 (2009)
- J. Lee, "Thermal resistance effects of crud and oxide layers to the safety analysis", 2018 TOPFUEL (2018)
- I. Dumnernchanvanit, "Initial experimental evaluation of crud-resistant materials for light water reactors", Journal of Nuclear Materials, 498, pp.1~8 (2018), Elsevier BV[DOI]
- Seung Heon Baek, "Effect of chemical etching of fuel cladding surface on crud deposition behavior in simulated primary water of PWRs at 328 °C", Annals of Nuclear Energy, 116, pp.69~77 (2018), Elsevier BV[DOI]
- Seung Heon Baek, "Effects of heat flux on fuel crud deposition and sub-cooled nucleate boiling in simulated PWR primary water at 13 MPa", Annals of Nuclear Energy, 133, pp.178~185 (2019), Elsevier BV[DOI]
- W. A. Byers, "Simulation of PWR crud", ICONE22 (2014)
- G. Wang, "Thermal conductivity measurement for simulated PWR crud", ICONE21 (2013)
- Z. Karoutas, "Critical heat flux and crud WALT loop measurements for westinghouse accident tolerant fuel", 2019 TOPFUEL (2019)
- An Investigation into the Effect of “CRUD” Deposits on Surface Temperature, Dry-Out and Pressure Drop, with Forced Convection Boiling of Water at 69 Bar in an Annular Test Section, "R. v Macbeth", UKAEA Reactor Group, ~ (1971)
- Jacopo Buongiorno, "Can corrosion and CRUD actually improve safety margins in LWRs?", Annals of Nuclear Energy, 63, pp.9~21 (2014), Elsevier BV[DOI]
- Ji Kim, "Design Study of CRUD Thermal Properties Characterization Facility DISNY Under Pressurized Water Reactor Normal Operating Condition", Advances in Thermal Hydraulics (ATH 2022), pp.563~574 (2022), American Nuclear Society
- 김지용, "파울링된 피복관 표면의 가압 경수로 운전환경에서의 미포화 비등 열전달 성능평가를 위한 실험장치 구축 연구", 한국유체기계학회 논문집, 25(5), pp.12~21 (2022), 한국유체기계학회
- Final Safety Analysis Report for Hanbit Unit 5, 6 (Chapter 4), "Khnp", ~ (1997)
- Final Safety Analysis Report for Shin-Kori Unit 3, 4 (Chapter 4), "Khnp", ~ (2008)
- Bassam A. Khuwaileh, "On the performance of nanofluids in APR 1400 PLUS7 assembly: Neutronics", Annals of Nuclear Energy, 144, pp.107508~ (2020), Elsevier BV[DOI]
- J. -J. Jeong, "Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3. 1", Ann. Nucl. Energy, 26, pp.1611~1642 (1999)
- Characterization of Corrosion Products on the Callaway Cycle 9PWR Core, "J. A. Sawicki", ~ (2001)
- Junhyuk Ham, "Effect of TiN Coating on the Fouling Behavior of Crud on Pressurized Water Reactor Fuel Cladding", Journal of Nuclear Materials, 549, pp.152870~ (2021), Elsevier BV[DOI]
- Y. Lee, "Chemistry change of CRUD with various metal ion concentration conditions in PWR fuel cladding", 20th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors (2022), Springer
- Y. Lee, "Microstructure change of crud with various heat flux conditions", PWR FUEL CLADDING, 2021TOPFUEL (2021)
- H. W. Coleman, "Experimentation, Validation, and Uncertainty Analysis for Engineers" (2018), John Wiley & Sons
- Muhammad Awais, "Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers", International Journal of Heat and Mass Transfer, 141, pp.580~603 (2019), Elsevier BV[DOI]
- Ali Fguiri, "Estimation of fouling resistance in a phosphoric acid", steam heat exchanger using inverse method, 2021, pp.192, 116935~[DOI]
- T. L. Bergman, "Fundamentals of Heat and Mass Transfer" (2011), John Wiley & Sons
- G. Wang, "Improved CRUD Heat Transfer Model for Dryout on Fuel Pin Surfaces at PWR Operating Conditions", Doctor, pp.2009
- Description Report of ATLAS Facility and Instrumentation, "J. B. Lee", ~ (2020)
- John H. Lienhard, "On the commonality of equations for natural convection from immersed bodies", International Journal of Heat and Mass Transfer, 16(11), pp.2121~2123 (1973), Elsevier BV[DOI]
- F.W. Dittus, "Heat Transfer in Automobile Radiators of Tubular Type", pp.13~ (1930)
- Analysis of Heat Transfer, Burnout, Pressure Drop and Density Date for High-Pressure Water, "W. H. Jens", Argonne National Lab, ~ (1951)
- J.R.S. Thom, "Boiling in Subcooled Water during Flow up Heated Tubes or Annuli", Paper Presented at the Symposium on Boiling Heat Transfer in Steam Generating Units and Heat Exchangers (1965)
- J. C. Chen, "Correlation for boiling heat transfer to saturated fluids in convective flow", Ind. Eng. Chem. Process Des. Dev, 5, pp.322~329 (1966)
- H. K. Forster, "Dynamics of vapor bubbles and boiling heat transfer", AIChE J, 1, pp.531~535 (1955)
- Youngjae Park, "Experimental Study about the Effects of CRUD on Quenching Heat Transfer of Simulated Fuel Rod in Single Flow Channel under PWR Reflood Flow Conditions", Doctor, pp.2021
- C. Sauder, "Ceramic Matrix Composites: Materials, Modeling and Technology", pp.609~646 (2014)
- Donghwi Lee, "Enhanced flow boiling heat transfer on chromium coated zircaloy-4 using cold spray technique for accident tolerant fuel (ATF) materials", Applied Thermal Engineering, 185, pp.116347~ (2021), Elsevier BV[DOI]