Development of the vapor film thickness correlation in porous corrosion deposits on the cladding in PWR
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The porous corrosion deposits (known as CRUD) adhered to the cladding have an important effect on the heat transfer from fuel rods to coolant in PWRs. The vapor film is the main constituent in the two-phase film boiling model. This paper presents a vapor film thickness correlation, associated with CRUD porosity, CRUD chimney density, CRUD particle size, CRUD thickness and heat flux. The dependences of the vapor film thickness on the various influential factors can be intuitively reflected from this vapor film thickness correlation. The temperature, pressure, and boric acid concentration distributions in CRUD can be well predicted using the two-phase film boiling model coupled with the vapor film thickness correlation. It suggests that the vapor thickness correlation can estimate the vapor film thickness more conveniently than the previously reported vapor thickness calculation methods.
Abstract
The porous corrosion deposits (known as CRUD) adhered to the cladding have an important effect on the heat transfer from fuel rods to coolant in PWRs. The vapor film is the main constituent in the two-phase film boiling model. This paper presents a vapor film thickness correlation, associated with CRUD porosity, CRUD chimney density, CRUD particle size, CRUD thickness and heat flux. The dependences of the vapor film thickness on the various influential factors can be intuitively reflected from this vapor film thickness correlation. The temperature, pressure, and boric acid concentration distributions in CRUD can be well predicted using the two-phase film boiling model coupled with the vapor film thickness correlation. It suggests that the vapor thickness correlation can estimate the vapor film thickness more conveniently than the previously reported vapor thickness calculation methods.
참고문헌 (23)
- F. Carrette, "Analysis and TEM examination of corrosion scales grown on Alloy 690 exposed to pressurized water at 325 C", Surf. Interface Anal, 34(1), pp.135~138 (2002)
- W.A. Byers, "Structure and chemistry of PWR crud", International Conference Water Chemistry in Nuclear Reactors Systems Conference, pp.11~14 (2004)
- P. Athe, "Assessment of the predictive capability of VERAdCS for CASL challenge problems", Journal of Verification, Validation and Uncertainty Quantification, 6(2) (2021)
- N. Cinosi, "The effective thermal conductivity of crud and heat transfer from crud-coated PWR fuel", Nucl. Eng. Des, 241(3), pp.792~798 (2011)
- P. Cohen, "Heat and mass transfer for boiling in porous deposits with chimneys", 70(138), pp.71~80 (1974)
- C. Pan, "Concentration levels of solutes in porous deposits with chimneys under wick boiling conditions", Nucl. Eng. Des, 99, pp.317~327 (1985)
- J. Henshaw, "A model of chemistry and thermal hydraulics in PWR fuel crud deposits", J. Nucl. Mater, 353(1-2), pp.1~11 (2006)
- I. U. Haq, "Heat and Mass Transfer Analysis for Crud Coated PWR Fuel", pp.2011
- M. Short, "Multiphysics modeling of porous CRUD deposits in nuclear reactors", J. Nucl. Mater, 443(1-3), pp.579~587 (2013)
- B. G. Park, "Meso-scale multi-physics full coupling within porous CRUD deposits on nuclear fuel", J. Nucl. Mater, 512, pp.100~117 (2018)
- G. Wang, "Improved Crud Heat Transfer Model for Dryout on Fuel Pin Surfaces at Pwr Operating Conditions", pp.2009
- M. Jin, "Multiphysics modeling of two-phase film boiling within porous corrosion deposits", J. Comput. Phys, 316, pp.504~518 (2016)
- J. Collier, "Convective Boiling and Condensation" (1994), Oxford University Press
- D. Y. Yeo, "Modeling heat transfer through corrosion product deposits on fuel rods in pressurized water reactors", Nucl. Eng. Des, 342, pp.308~319 (2019)
- Modeling PWR Fuel Corrosion Product Deposition and Growth Processes, "S. Dickinson", EPRI, ~ (2004)
- PWR Axial Offset Anomaly (AOA) Guidelines, Revision 1, "J. Deshon", EPRI, ~ (2004)
- Ying Shi, "Fractal model for prediction of effective thermal conductivity of gas diffusion layer in proton exchange membrane fuel cell", J. Power Sources, 185(1), pp.241~247 (2008)
- D. Y. Yeo, "Modeling film boiling within chimney-structured porous media and heat pipes", Int. J. Heat Mass Tran, 124, pp.576~585 (2018)
- W. Woodside, "Thermal conductivity of porous media. II. Consolidated rocks", J. Appl. Phys, 32(9), pp.1699~ (1961)
- Property Correlations for Lithium, Sodium, Helium, Flibe and Water in Fusion Reactor Applications, "P. J. Gierszewski", Massachusetts Institute of Technology, Plasma Fusion Center, ~ (1980)
- Simulated Fuel Crud Thermal Conductivity Measurements under Pressurized Water Reactor Conditions, "J. Deshon", EPRI, ~, pp.Technical Report 1022896 (2011)
- J. L. Uhle, "Boiling Heat Transfer Characteristics of Steam Generator U-Tube Fouling", pp.1997
- Development of a Crud Induced Localized Corrosion Analysis Capability in VERA, "R. Salko Jr.", Oak Ridge National Lab.(ORNL), ~ (2020)