저온 플라즈마 처리를 이용한 파라 아라미드 섬유의 표면 개질 효과 및 역학적 특성
Surface Modification Effect and Mechanical Property of para-Aramid Fiber by Low-temperature Plasma Treatment
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
para-Aramid fibers were treated by low-temperature plasma to improve the adhesion. The surface of para-aramid fibers were treated with gaseous plasma of several discharge power and treatment time in oxygen gas at 1Torr pressure. The treated fibers at low-temperature plasma were taken oxygen-containing functional groups and micro-crator on the surface. The modified fibers were measured by dynamic contact angle analyzer and XPS(X-ray photoelectron spectroscopy). The Interfacial adhesion properties of aramid fabric and polyurethane resin were determined by T-peel test. The surface of aramid fibers were observed by FE-SEM photographs. It was found that surface modification and chemical component ratio of the aramid fibers were improved wettability and adhesion characterization.
Abstract
para-Aramid fibers were treated by low-temperature plasma to improve the adhesion. The surface of para-aramid fibers were treated with gaseous plasma of several discharge power and treatment time in oxygen gas at 1Torr pressure. The treated fibers at low-temperature plasma were taken oxygen-containing functional groups and micro-crator on the surface. The modified fibers were measured by dynamic contact angle analyzer and XPS(X-ray photoelectron spectroscopy). The Interfacial adhesion properties of aramid fabric and polyurethane resin were determined by T-peel test. The surface of aramid fibers were observed by FE-SEM photographs. It was found that surface modification and chemical component ratio of the aramid fibers were improved wettability and adhesion characterization.
참고문헌 (12)
- 이태상, "아라미드 섬유의 플라즈마 처리에 따른 클로로프렌 고무와의 계면접착 특성", 한국섬유공학회지, 47(3), pp.205~211 (2010), 한국섬유공학회
- 박법, "산소 저온 플라즈마 처리에 의한 실리콘코팅 막 구조원단의 접착특성", 한국염색가공학회지, 23(3), pp.195~200 (2011), 한국염색가공학회
- U. Plawky, "Surface Modification of an Aramid Fibre Treated in a Low-Temperature Microwave Plasma", J. Mater. Sci., 31(22), pp.6043~ (1996)
- J. Hwang, "Effects of Atmospheric Pressure Helium", Air Plasma Treatment on Adhesion and Mechanical Properties of Aramid Fibers, 2003, pp.17(6), 847~
- L. Liu, "Influence of Moisture Regain of Aramid Fibers on Effects of Atmospheric Pressure Plasma Treatment on Improving Adhesion with Epoxy", J. Appl. Polym. Sci., 102(1), pp.242~ (2006)
- 장진호, "Surface Modification of Meta-aramid Films by UV", ozone Irradiation, 201008, pp.11(5), 677~682[DOI]
- 장진호, "자외선 조사에 의한 PET 필름의 연속식 표면 처리 -조사 파장의 분포 변화에 의한 영향-", 한국섬유공학회지, 39(1), pp.100~107 (2002), 한국섬유공학회
- 권일준, "연속 대기압 플라즈마를 처리한 폴리에스테르 섬유의 표면 특성", 한국염색가공학회지, 19(4), pp.38~46 (2007), 한국염색가공학회
- 윤득원, "Surface Modification of Ultra High Molecular Weight Polyethylene Films by UV", ozone Ir radiation, 2011, pp.23(2), 76~82[DOI]
- G. S. Sheu, "Surface Properties and Interfacial Adhesion Studies of Aramid Fibres Modified By Gas Plasmas", Comp. Sci. Technol., 52(4), pp.489~ (1994)
- 박영미, "산소 저온 플라즈마 처리에 의한 PVA 편광필름의 기능성 개선", 한국염색가공학회지, 16(3), pp.14~21 (2004), 한국염색가공학회
- C. Jia, "Surface Treatment of Aramid Fiber by Air Dielectric Barrier Discharge Plasma at Atmospheric Pressure", Appl. Surf. Sci., 257(9), pp.4165~ (2011)