대기압 플라즈마 처리를 통한 PP 섬유의 친수화
Hydrophilization of PP Fiber through Atmospheric Pressure Plasma Processing
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Polypropylene fiber has the advantages of light weight, heat retention and antibacterial properties, but it is difficult to expand its market because it cannot be dyed or imparted functionality due to its hydrophobic properties. Atmospheric pressure plasma processing can modify the surface of the fiber and create polar functional groups on the surface of the fiber. In this study, an experiment was conducted on the hydrophilization of the ultra-hydrophobicity of polypropylene through plasma processing and surface changes before and after plasma processing. The ultra-hydrophobicity of polypropylene is the cause of impossible for dyeing and imparting functionality. Untreated polypropylene became hydrophilic, and it was confirmed that the ratio of oxygen and carbon(O/C) increased about 11 times from untreated polypropylene 0.017 to plasma-treated polypropylene 0.190.
Abstract
Polypropylene fiber has the advantages of light weight, heat retention and antibacterial properties, but it is difficult to expand its market because it cannot be dyed or imparted functionality due to its hydrophobic properties. Atmospheric pressure plasma processing can modify the surface of the fiber and create polar functional groups on the surface of the fiber. In this study, an experiment was conducted on the hydrophilization of the ultra-hydrophobicity of polypropylene through plasma processing and surface changes before and after plasma processing. The ultra-hydrophobicity of polypropylene is the cause of impossible for dyeing and imparting functionality. Untreated polypropylene became hydrophilic, and it was confirmed that the ratio of oxygen and carbon(O/C) increased about 11 times from untreated polypropylene 0.017 to plasma-treated polypropylene 0.190.
참고문헌 (14)
- D. J. Carlsson, "The Weatherability of Polypropylene mono-Filaments Effects of Fiber Production Conditions", J. Appl. Polym. Sci, 21(11), pp.2963~ (1977)
- M. Ahmed, "Polypropylene Fibers-Science and Technology", pp.462~499 (1982), Elsevier Scientific Pub. Co
- Y. H. Ham, "Etching Characteristics and Mechanism of ZnO Thin Films in Inductively Coupled HBr", Ar Plasma, 2009, pp.517(14), 4242~
- 트란 꺽시, "대면적 대기압 플라즈마-용액 시스템을 이용한 폴리프로필렌 표면 처리", Korean Chemical Engineering Research(HWAHAK KONGHAK), 49(3), pp.271~276 (2011), 한국화학공학회
- Y. Zhao, "Effect of Washing on Surface Free Energy of Polystyrene Plate Treated by RF Atmospheric Pressure Plasma", Polymer Testing, 25, pp.327~ (2006)
- K. Baba, "Investigation of Gas-liquid Interface in Atmospheric-pressure Micro Plasma with Solution", Thin Solid Films, 515, pp.4308~ (2007)
- O. J. Kwon, "Surface Characteristics of Polypropylene Film Treated by an Atmospheric Pressure Plasma", Surf. Coat. Technol, 192, pp.1~ (2005)
- S. Tang, "Novel Effects of Surface Modification on Activated Carbon Fibers Using a Low Pressure Plasma Treatment", J. Phys. Chem. C, 111, pp.1820~ (2007)
- 마재혁, "진공 저온 플라즈마와 대기압 코로나 방전가공 PET 직물의 물리화학적 특성", 한국염색가공학회지, 26(3), pp.201~208 (2014), 한국염색가공학회
- T. J. Horr, "The Use of Contact Angle Measurements to Quantify the Adsorption Density and Thickness of Organic Molecules on Hydrophilic Surfaces", Colloids and Surfaces A : Physicochemical and Engineering Aspects, 97(3), pp.183~ (1995)
- O. J. Kwon, "Comparison of the Surface Characteristics of Polypropylene Films Treated by Ar and Mixed gas(Ar", O2)Atmospheric Pressure Plasma, 2006, pp.295, 409~
- L. H. Zhao, "Long-term Retention of Hydrophilic Behavior of Plasma treated Polydimethylsiloxane(PDMS)Surfaces Stored under Water and Luria-Bertani Broth", Sensors and Actuators A : Physical, 181, pp.33~ (2012)
- V. A. Titov, "Study on the Application Possibilities of an Atmospheric Pressure Glow Discharge with Liquid Electrolyte Cathode for the Modification of Polymer Materials", Surf. Coat. Technol, 199, pp.231~ (2005)
- 함용현, "플라즈마 진단에 의한 PECVD SiO₂ 증착의 불균일성 원인 연구", 전기전자재료학회논문지, 24(2), pp.89~94 (2011), 한국전기전자재료학회