본문 바로가기
KERD
논문KCI 등재

저점도 및 고점도 Bulk-fill Giomer 복합레진과 Bulk-fill 복합레진의 전환율과 중합수축

Degree of Conversion and Polymerization Shrinkage of Low and High Viscosity Bulk-Fill Giomer-based and Resin-based composites

김현정|남순현|이제식|김희라|권태엽
대한소아치과학회 (The Korean Academy Of Pediatric Dentistry)|2019.02|대한소아치과학회지 (Journal of the Korean academy of pediatric dentistry)|제46권 제1호|pp. 1-9|DOI https://doi.org/10.5933/JKAPD.2019.46.1.1

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Bulk-fill giomerBulk-fillDegree of conversionPolymerization shrinkage
주제분류치의학

초록

이번 연구에서는 저점도 및 고점도 bulk-fill giomer 복합레진의 전환율과 중합수축을 기존 bulk-fill 복합레진 및 전통적 복합레진과비교 평가해보고자 하였다. Bulk-fill giomer 복합레진 2종류(Beautifil Bulk Restorative(BBR), Beautifil Bulk Flowable(BBF)), bulk-fill 복합레진 2종류(Tetric N-Ceram Bulk-fill(TBF), SureFil SDR flow(SDR)), 전통적 복합레진 2종류(Tetric N-Ceram(TN), Tetric N-flow(TF))를 사용하였다. 중합도 측정은 Fourier transform infrared spectroscopy을 사용하였으며, 중합수축은 linometer을 이용하여 측정하였다. 복합레진 하면의 전환율 측정 결과 2 mm와 4 mm 깊이 모두 BBR에서 가장 낮게 나왔으며, SDR에서 가장 높게 나왔다. 4 mm 깊이에서 고점도 및 저점도 bulk-fill giomer 복합레진의 전환율은 bulk-fill 복합레진에 비해 유의하게 낮은 값을 보였다(p < 0.05). 깊이에따른 전환율 비교 시 TBF, TN, TF는 유의차를 보였으며(p < 0.05), BBR, BBF, SDR는 유의차를 보이지 않았다. 중합수축은 TF > SDR > BBF > TBF > TN, BBR 순서로 감소 했으며(p < 0.05), bulk-fill giomer 복합레진은 bulk-fill 복합레진보다 낮은 중합수축량을 보였다(p < 0.05). 이번 연구 결과 4 mm 깊이에서 bulk-fill giomer 복합레진 및 TBF는 불충분한 중합을 나타냈으며, 2 mm와 4 mm 모두에서 고점도및 저점도 bulk-fill giomer 복합레진은 bulk-fill 복합레진에 비해 낮은 전환율을 보였다. 그러므로 bulk-fill giomer 복합레진의 임상적인적용을 위해서는 이에 대한 충분한 고찰 및 주의가 필요할 것으로 생각된다.

Abstract

The aim of this study was to compare the degree of conversion and polymerization shrinkage of low and high viscosity bulk-fill giomer-based and resin-based composites. Two bulk-fill giomer (Beautifil Bulk Restorative (BBR), Beautifil Bulk Flowable (BBF)), two bulk-fill (Tetric N-Ceram Bulk-fill (TBF), SureFil SDR flow (SDR)) and two conventional resin composites (Tetric N-Ceram (TN), Tetric N-flow (TF)) were selected for this study. The degree of conversion was measured by using Fourier transform infrared spectroscopy. Polymerization shrinkage was measured with the linometer. For all depth, BBR had the lowest degree of conversion and SDR had the highest. At 4 mm, the degree of conversion of low and high viscosity bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). At the depth between 2 mm and 4 mm, there were significant difference with TBF, TN and TF (p < 0.05), while no significant difference in the degree of conversion was measured for BBR, BBF and SDR. Polymerization shrinkage of six resin composites decreased in the following order: TF > SDR > BBF > TBF > TN and BBR (p < 0.05). Polymerization shrinkage of bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). From this study, it is found that the bulk-fill giomer resin composites and TBF were not sufficiently cured in 4 mm depth. The degree of conversion of low and high viscosity bulk-fill giomer resin composites was significantly lower than bulk-fill resin composites in both 2 mm and 4 mm depths. Therefore, such features of bulk-fill giomer resin composites should be carefully considered in clinical application.

참고문헌 (42)

  1. Moraes RR, "Control of polymerization shrinkage and stress in nanogel-modified monomer and composite materials", Dent Mater, 27, pp.509~519 (2011)
  2. Shortall AC, "Depth of cure of radiation-activated composite restoratives-influence of shade and opacity", J Oral Rehabil, 22, pp.337~342 (1995)
  3. Alomari QD, "Effect of liners on cusp deflection and gap formation in composite restorations", Oper Dent, 26, pp.406~411 (2001)
  4. Ferracane JL, "Relationship between composite contraction stress and leakage in Class V cavities", Am J Dent, 16, pp.239~243 (2003)
  5. Abbas G, "Cuspal movement and microleakage in premolar teeth restored with a packable composite cured in bulk or in increments", J Dent, 31, pp.437~444 (2003)
  6. Garcia D, "Polymerization shrinkage and depth of cure of bulk fill flowable composite resins", Oper Dent, 39, pp.441~448 (2014)
  7. Marovic D, "Monomer conversion and shrinkage force kinetics of low-viscosity bulk-fill resin composites", Acta Odontol Scand, 73, pp.474~480 (2015)
  8. Ilie N, "Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites", J Dent, 41, pp.695~702 (2013)
  9. Jang JH, "Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin", Oper Dent, 40, pp.172~180 (2015)
  10. Moszner N, "Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials", Dent Mater, 24, pp.901~907 (2008)
  11. Gonulol N, "Water Sorption, Solubility, and Color Stability of Giomer Restoratives", J Esthet Restor Dent, 27, pp.300~306 (2015)
  12. Itota T, "Fluoride release and recharge in giomer, compomer and resin composite", Dent Mater, 20, pp.789~795 (2004)
  13. Hatibović-Kofman S, "Fluoride release from glass ionomer cement in vivo and in vitro", Swed Dent J, 15, pp.253~258 (1991)
  14. Sideridou I, "Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins", Biomaterials, 24, pp.655~665 (2003)
  15. Carmichael AJ, "Allergic contact dermatitis to bisphenol-A-glycidyldimethacrylate(BisGMA)dental resin associated with sensitivity to epoxy resin", Br Dent J, 183, pp.297~298 (1997)
  16. Hansel C, "Effetcs of various resin composite(co)monomers and extracts on two caries-associated micro-organisms in vitro", J Dent Res, 77, pp.60~67 (1998)
  17. Stansbury JW, "Determination of double bond conversion in dental resins by near infrared spectroscopy", Dent Mater, 17, pp.71~79 (2001)
  18. de Gee AJ, "True linear polymerization shrinkage of unfilled resins and composite determined with a linometer", Dent Mater, 9, pp.11~14 (1993)
  19. Fujimoto Y, "Detection of ions released from S-PRG fillers and their modulation effect", Dent Mater, 29, pp.392~397 (2010)
  20. Varpio M, "Clinical aspects of restorative treatment in the primary dentition", Swed Dent J Suppl, 96, pp.1~47 (1993)
  21. Rueggeberg FA, "Correlation of parameters used to estimate monomer conversion in a light-cured composite", J Dent Res, 67, pp.932~937 (1988)
  22. Bala O, "Effect of LED and halogen light curing on polymerization of resin-based composites", J Oral Rehabil, 32, pp.134~140 (2005)
  23. Asmussen E, "Factors affecting the quantity of remaining double bonds in restorative resin polymers", Scand J Dent Res, 90, pp.490~496 (1982)
  24. Silikas N, "Light intensity effects on resin-composite degree of conversion and shrinkage strain", Dent Mater, 16, pp.292~296 (2000)
  25. Czasch P, "In vitro comparison of mechanical properties and degree of cure of bulk fill composites", Clin Oral Investig, 17, pp.227~235 (2013)
  26. Yu P, "Degree of Conversion and Polymerization Shrinkage of Bulk-Fill Resin-Based Composites", Oper Dent, 42, pp.82~89 (2017)
  27. 노태환, "Comparison of the Mechanical Properties between Bulk-fill and Conventional Composites", 대한소아치과학회지, 43(4), pp.365~373 (2016), 대한소아치과학회[DOI]
  28. Al-Ahdal K, "Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth", Dent Mater, 31, pp.1207~1213 (2015)
  29. Ilie N, "In vitro comparison of polymerisation kinetics and the micro-mechanical properties of low and high viscosity giomers and RBC materials", J Dent, 43, pp.814~822 (2015)
  30. Tsujimoto A, "Depth of cure, flexural properties and volumetric shrinkage of low and high viscosity bulk-fill giomers and resin composites", Dent Mater J, 36, pp.205~213 (2017)
  31. Yap AU, "Depth of cure of contemporary bulk-fill resin-based composites", Dent Mater, 35, pp.503~510 (2016)
  32. "Dent Mater", 2016, 1196~
  33. AlQahtani MQ, "Effect of High Irradiance on Depth of Cure of a Conventional and a Bulk Fill Resin-based Composite", Oper Dent, 40, pp.662~672 (2015)
  34. Fronza BM, "Monomer conversion, microhardness, internal marginal adaptation, and shrinkage stress of bulk-fill resin composites", Dent Mater, 31, pp.1542~1551 (2015)
  35. Sideridou I, "Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins", Biomaterials, 23, pp.1819~1829 (2002)
  36. Bausch JR, "Clinical significance of polymerization shrinkage of composite resins", J Prosthet Dent, 48, pp.59~67 (1982)
  37. 임미영, "가변 광도 중합에 따른 복합레진의 중합수축에 관한 연구", Restorative Dentistry and Endodontics, 32(1), pp.28~36 (2007), 대한치과보존학회
  38. Braga RR, "Factors involved in the development of polymerization shrinkage stress in resin-composites : a systematic review", Dent Mater, 21, pp.962~970 (2005)
  39. Ilie N, "Investigations on a methacrylate-based flowable composite based on the SDRTM technology", Dent Mater, 27, pp.348~355 (2011)
  40. Ferracane JL, "Resin-based composite performance: are there some things we can't predict?", Dent Mater, 29, pp.51~58 (2013)
  41. Feilzer AJ, "Quantitative determination of stress reduction by flow in composite restorations", Dent Mater, 6, pp.167~171 (1990)
  42. Kinomoto Y, "Comparison of polymerization contraction stresses between self-and lightcuring composites", J Dent, 27, pp.383~389 (1999)

관련 논문AI추천

Comparison of the Mechanical Properties between Bulk-fill and Conventional Composites김신, 권용훈, 김지연, 노태환, 박소영, 송은주, 정태성, 표애리대한소아치과학회 · 대한소아치과학회지2016 · 제43권 제4호Bulk-fill과 Conventional 복합레진의 물성비교김기섭, 김종빈, 김종수, 석유정대한소아치과학회 · 대한소아치과학회지2016 · 제43권 제4호Bulk-fill 복합레진의 상아질 전단결합강도 및 미세누출박호원, 서현우, 이주현, 이한별대한소아치과학회 · 대한소아치과학회지2015 · 제42권 제4호Physicochemical characterization of two bulk fill composites at different depthsCuevas-Suárez Carlos Enrique, Francia Alejandro, Grazioli Guillermo, Moraes Rafael Ratto de, Nakanishi Leina대한치과보존학회 · Restorative Dentistry and Endodontics2021 · 제46권 제3호Silorane 복합레진의 중합수축의 동력학권영철, 이인복대한치과보존학회 · Restorative Dentistry and Endodontics2010 · 제35권 제1호Comparison of Surface Microhardness of the Flowable Bulk-Fill Resin and the Packable Bulk-Fill Resin according to Light Curing Time and DistanceDo-Seon Lim, Hee-Jung Lim, Hyung-Min Kim, Moon-Jin Jeong한국치위생과학회 · 치위생과학회지2023 · 제23권 제2호

이 간행물의 다른 논문 (13건)

경희대학교 소아치과에 내원한 아동의 진단 모형 분석을 이용한 영구치 맹출 단계오태준, 이효설, 김광철, 김미선, 최성철, 남옥형pp. 10-20Moisture Insensitive Primer와 Self-Etching Primer를 사용한 교정용 브라켓 접착 시 타액오염이 전단결합강도에 미치는 영향 비교오윤정, 오소희pp. 21-28Factors Influencing Prognosis of Traumatized Tooth in Primary Tooth Intrusion한윤경, 김미선, 최성철, 남옥형, 이효설, 김광철, 채용권pp. 29-37구호흡 어린이에서 수면호흡장애와 상기도와의 관계양연미, 김재곤, 이대우, 김도영pp. 38-47중지 중절골과 경추를 이용한 골령 평가의 체질량 지수에 따른 일치도이대우, 양연미, 김재곤, 이석순pp. 48-56
원문 보기