본문 바로가기
KERD
논문KCI 등재

Bulk-fill 복합레진의 상아질 전단결합강도 및 미세누출

Evaluation of Shear Bond Strength and Microleakage of Bulk-fill Resin Composites

이주현|박호원|서현우|이한별
대한소아치과학회 (The Korean Academy Of Pediatric Dentistry)|2015.11|대한소아치과학회지 (Journal of the Korean academy of pediatric dentistry)|제42권 제4호|pp. 281-290|DOI http://dx.doi.org/10.5933/JKAPD.2015.42.4.281

2

조회

0

다운로드

4

인용

0

참고문헌

키워드

Shear bond strength미세누출전단결합강도Bulk-fill 복합레진Bulk-fill resin composites7세대 상아질 접착제Micro-leakage7thgenerationbondingagent
주제분류치의학

초록

본 연구의 목적은 bulk-fill 복합레진의 상아질 전단결합강도 및 미세누출을 평가함에 있다. 실험군으로 1종의 고점도 bulk-fill 복합레진과 2종의 저점도 bulk-fill 복합레진을 사용하였고 대조군으로 1종의 conventional 복합레진을 사용하였다. 상아질 접착제는 7세대를 사용하였다. 영구치를 4군으로 나눈 후 전단결합강도 측정을 위해 레진블록을 실험군은 4 mm, 대조군은 2 mm 두께로 축조하였고, 미세누출을 평가를 위해 실험군은 4 mm 단일층 충전, 대조군은 2 mm씩 2회 적층충전을 시행하였다. 전단결합강도와 관련하여 대조군과 비교하였을 때 저점도 bulk-fill 복합레진에서는 통계적으로 유의한 차이가 존재하지않았으나, 고점도 bulk-fill 복합레진에서는 유의하게 낮은 값이 관찰되었다(p < 0.05). 미세누출과 관련하여 4군 사이에 통계적으로 유의한 차이가 존재하지 않았다.

Abstract

The aim of this study was to evaluate shear bond strength (SBS) of bulk-fill resin composites (RCs) to dentin and their micro-leakage. One high-viscosity bulk-fill RC and 2 low-viscosity bulk-fill RCs were compared with 1 conventional RC. 7thgenerationbondingagentswereused. In order to evaluate SBS values, 40 permanent molars were selected and divided into 4 groups. The bulk-fill RCs were applied in 4 mm thickness, whereas the conventional RC was applied in 2 mm thickness. In order to evaluate micro-leakage, class I cavities (5 × 2 × 4 mm) were prepared in 32 permanent molars. The teeth were divided into 4 groups and restored with resin composites in an increment of 4 mm for the bulkfill RC and in 2 horizontal increments of 2 mm for the conventional RC. The mean SBS value of conventional RC showed no statistically significant difference when compared with those of low-viscosity bulk-fill RCs. However, the mean SBS value of high-viscosity bulk-fill RC was significantly lower than that of conventional RC (p < 0.05). There were no statistically significant differences in micro-leakage between the 4 groups. For SBS and micro-leakage, the use of low-viscosity bulk-fill RCs might help clinicians simplify the procedure.

참고문헌 (35)

  1. Kubo S, "The effect of light-curing modes on the microleakage of cervical resin composite restorations", J Dent, 32, pp.247~254 (2004)
  2. Karthick K, "Polymerization Shrinkage of Composites - A Review", J Ind Acad Dent Spec, 2, pp.32~36 (2011)
  3. Winkler MM, "Finite element stress analysis of three filling techniques for class V light-cured composite restorations", J Dent Res, 75, pp.1477~1483 (1996)
  4. Versluis A, "Does an incremental filling technique reduce polymerization shrinkage stresses?", J Dent Res, 75, pp.871~878 (1996)
  5. Manhart J, "Bulk-fill-composites. Modern application technique of direct composites for posterior teeth", Swiss Dent J, 124, pp.19~37
  6. Czasch P, "In vitro comparison of mechanical properties and degree of cure of bulk fill composites", Clin Oral Investig, 17, pp.227~235 (2013)
  7. Bucuta S, "Light transmittance and micromechanical properties of bulk fill vs. conventional resin based composites", Clin Oral Investig, 18, pp.1991~2000 (2014)
  8. Moorthy A, "Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials", J Dent, 40, pp.500~505 (2012)
  9. Campos EA, "Marginal adaptation of class II cavities restored with bulk-fill composites", J Dent, 42, pp.575~581 (2014)
  10. Alrahlah A, "Post-cure depth of bulk fill dental resin-composites", Dent Mater, 30, pp.149~154 (2014)
  11. El-Damanhoury H, "Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites", Oper Dent, 39, pp.374~382 (2014)
  12. Leprince JG, "Physicomechanical characteristics of commercially available bulk-fill composites", J Dent, 32, pp.247~254 (2014)
  13. Scotti N, "Microleakage at enamel and dentin margins with a bulk fills flowable resin", Eur J Dent, 8, pp.1~8 (2014)
  14. Jang JH, "Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin", Oper Dent, 40, pp.172~180 (2015)
  15. Roggendorf MJ, "Marginal quality of flowable 4-mm base vs. conventionally layered resin composite", J Dent, 39, pp.643~647 (2011)
  16. Van Ende A, "Bulk-filling of high C-factor posterior cavities: effect on adhesion to cavity-bottom dentin", Dent Mater, 29, pp.269~277 (2013)
  17. Ilie N, "An in-vitro assessment of the shear bond strength of bulk-fill resin composites to permanent and deciduous teeth", J Dent, 42, pp.850~855 (2014)
  18. Flury S, "Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites", Dent Mater, 30, pp.1104~1112 (2014)
  19. El-Safty S, "Creep deformation of restorative resin-composites intended for bulk-fill placement", Dent Mater, 28, pp.928~935 (2012)
  20. Goodis HE, "Storage effects on dentin permeability and shear bond strengths", Dent Mater, 9, pp.79~84 (1993)
  21. 김창윤, "열순환 횟수에 따른 복합레진의 미세누출", Restorative Dentistry and Endodontics, 32(4), pp.377~384 (2007), 대한치과보존학회
  22. Venhoven BA, "Polymerization contraction and conversion of lightcuring BisGMA-based methacrylate resins", Biomaterials, 14, pp.871~875 (1993)
  23. Sakaguchi RL, "Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites", Dent Mater, 20, pp.388~396 (2004)
  24. Yamazaki PC, "Microleakage evaluation of a new lowshrinkage composite restorative material", Oper Dent, 31, pp.670~676 (2006)
  25. Eick JD, "Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity", Quintessence Int, 17, pp.103~111 (1986)
  26. "Technical Manual - SureFil SDR Flow from Dentsply Caulk"[URL]
  27. "Scientific Compendium Venus BulkFill reported by Heraeus kulzer"[URL]
  28. "Tetric N-Ceram Bulk Fill - Ivoclar Vivadent Asia"[URL]
  29. Alshali RZ, "Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals", Dent Mater, 29, pp.e213~e217 (2013)
  30. Xu X, "Shear bond strength with increasing light-guide distance from dentin", J Esthet Restor Dent, 18, pp.19~27 (2006)
  31. "A laboratory Evaluation of Bulk-Fill Versus Traditional Multi-Increment-Fill Resin-Based Composites reported by ADA Professional Product Review"[URL]
  32. Leloup G, "Meta-analytical review of factors involved in dentin adherence", J Dent Res, 80, pp.1605~1614 (2001)
  33. 황순주, "수복물의 미세누출도와 변연적합도 측정에 사용되는 방법 사이의 상관 관계 평가", Restorative Dentistry and Endodontics, 31(5), pp.337~343 (2006), 대한치과보존학회
  34. Knobloch LA, "Bond strengths of one-and two-step self-etch adhesive systems", J Prosthet Dent, 97, pp.216~222 (2007)
  35. Margvelashvili M, "In vitro evaluation of bonding effectiveness to dentin of all-in-one adhesives", J Dent, 38, pp.106~112 (2010)

관련 논문AI추천

유동성 레진 수복술에서 접착제 중합 여부에 따른 미세누출과 전단결합강도에 관한 연구김종수, 박용규, 유승훈대한소아치과학회 · 대한소아치과학회지2007 · 제34권 제3호Bulk-fill과 Conventional 복합레진의 물성비교김기섭, 김종빈, 김종수, 석유정대한소아치과학회 · 대한소아치과학회지2016 · 제43권 제4호유치에 대한 3-in-1 유동성 복합레진의 전단결합강도김신, 김지연, 신종현, 이형직, 정태성대한소아치과학회 · 대한소아치과학회지2018 · 제45권 제4호접착제의 다층적용이 복합레진의 전단결합강도에 미치는 영향박헌동, 이난영, 이상호, 이창섭대한소아치과학회 · 대한소아치과학회지2006 · 제33권 제3호간접 복합레진 합착 시 자가부식형과 자가접착형 레진시멘트의 상아질에 대한 미세인장 결합강도김일신, 박재구, 조영곤대한치과보존학회 · Restorative Dentistry and Endodontics2010 · 제35권 제2호유치 상아질에 대한 수종의 상아질 결합제의 전단결합강도에 대한 연구강선희, 김대업, 이광희대한소아치과학회 · 대한소아치과학회지2005 · 제32권 제2호

이 간행물의 다른 논문 (6건)

Biologic Response of Human Deciduous Dental Pulp Cells on Newly Developed MTA-like Materials신유석, 김성오, 이혜원, 이제호, 정재은, 송제선pp. 291-301Antibacterial Properties of Pit and Fissure Sealant Containing S-PRG filler on Streptococcus mutans서현우, 안진선, 이시영, 박호원pp. 302-311과잉치 치수유래 줄기세포의 분화제 처리 기간에 따른 상아모세포 발현 특성김종수pp. 312-318Orthodontic Treatment of a Child with Short Root Anomaly : a Case Report송지현, 안소연, 신가영, 이제우, 라지영, 이정은pp. 319-326소아의 호흡기 질환과 안전한 치과진정법의 연관성정태성, 정우진pp. 327-330
원문 보기