미세입자 분사마모 표면처리가 Fiber-Reinforced Composite 포스트의 굴곡강도에 미치는 영향
Influence of airborne-particle abrasion on flexural strength of fiber-reinforced composite post
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
목적: 미세입자 분사마모 표면처리가 Fiber-Reinforced Composite (FRC) 포스트의 굴곡강도에 미치는 영향을 평가하는 것이다. 연구 재료 및 방법: 두 종류의 FRC 포스트 (DT Light Post, Size 2, Bisco Inc. / RelyX Fiber Post, Size 3, 3M ESPE)를 사용하여 표면처리에 따라 6개의 그룹으로 무작위 분류하였다. 표면처리를 위해 30 μm Rocatec Soft와 50 μm aluminum oxide를 사용하였다. 표면처리 후 편평한 5 mm 부분을 만능시험기로 3점 굽힘시험을 시행하여 FRC 포스트의 굴곡강도와 굴곡계수를 측정하고 통계분석하였다. 결과: FRC포스트의 미세입자 분사마모 표면처리가 FRC포스트의 굴곡강도와 굴곡계수에는 영향을 미치지 않음을 알 수 있었다. 결론: 임상가들이 FRC포스트에 대하여 미세입자 분사마모 표면처리를 하여도 포스트의 굴곡강도와 굴곡계수에는 영향을 미치지 않으면서 접착강도를 높일 수 있을 근거 중의 하나가 될 수 있을 것이다.
Abstract
Purpose: Many studies have shown that airborne-particle abrasion of fiber post can improve the bonding strength to resin cement. But, airborne-particle abrasion may influence the property of fiber post. The purpose of this study is to evaluate the influence of airborne-particle abrasion on flexural strength of fiber post. Materials and Methods: Two fiber-reinforced posts; DT Light Post Size 2 (1.8 mm diameter, Bisco Inc) and RelyX Fiber Post Size 3 (1.9 mm diameter, 3M ESPE); were used in this study. Each group was divided into 3 subgroups according to different surface treatments; without pretreatment: 50 μm aluminum oxide (Cobra®, Renfert): and 30 μm aluminum oxide modified with silica (Rocatec Soft®, 3M ESPE). After airborne-particle abrasion procedure, three-point bending test was done to determine the flexural strength and flexural modulus. The diameter of each posts was measured to an accuracy of 0.01 mm using a digital micrometer. There was no diameter change before and after airborneparticle abrasion. The mean flexural moduli and flexural strengths calculated using the appropriate equations. The results were statistically analyzed using One-way ANOVA and Scheffe’s post-hoc test at 95% confidencial level. Results: There was no significant difference on flexural strength between groups. Conclusion: In the limitation of this study, flexural strength and flexural modulus of fiber post are not affected by airborne-particle abrasion.
참고문헌 (28)
- Galhano GA, "Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts", J Endod, 31, pp.209~211 (2005)
- Asmussen E, "Stiffness, elastic limit, and strength of newer types of endodontic posts", J Dent, 27, pp.275~278 (1999)
- Mehta SB, "A comparison of the survival of fibre posts cemented with two different composite resin systems", Br Dent J, 205, pp.E23~ (2008)
- Perdigão J, "The effect of silane on the bond strengths of fiber posts", Dent Mater, 22, pp.752~758 (2006)
- Valandro LF, "Microtensile bond strength between a quartz fiber post and a resin cement: effect of post surface conditioning", J Adhes Dent, 8, pp.105~111 (2006)
- Rathke A, "Effectiveness of bonding fiber posts to root canals and composite core build-ups", Eur J Oral Sci, 117, pp.604~610 (2009)
- Bitter K, "Post-endodontic restorations with adhesively luted fiber-reinforced composite post systems: a review", Am J Dent, 20, pp.353~360 (2007)
- Bateman G, "Fibrebased post systems: a review", Br Dent J, 195, pp.43~48 (2003)
- Monticelli F, "Effect of adhesive systems and surface treatment of methacrylate resin-based fiber posts on post-resin-dentin bonds", Am J Dent, 20, pp.231~234 (2007)
- Zicari F, "Factors affecting the cement-post interface", Dent Mater, 28, pp.287~297 (2012)
- Radovic I, "The effect of sandblasting on adhesion of a dualcured resin composite to methacrylic fiber posts:microtensile bond strength and SEM evaluation", J Dent, 35, pp.496~502 (2007)
- Monticelli F, "Surface treatments for improving bond strength to prefabricated fiber posts: a literature review", Oper Dent, 33, pp.346~355 (2008)
- Brown RP, "Handbook of plastics test methods", pp.139~149 (1988), Longman Scientific & Technical
- Mannocci F, "Three-point bending test of fiber posts", J Endod, 27, pp.758~761 (2001)
- Ozcan M, "Effect of surface conditioning methods on the bond strength of luting cements to ceramics", Dent Mater, 19, pp.725~731 (2003)
- Addison O, "The influence of cement lute, thermocycling and surface preparation on the strength of a porcelain laminate veneering material", Dent Mater, 20, pp.286~292 (2004)
- Vano M, "The adhesion between fibre posts and composite resin cores: the evaluation of microtensile bond strength following various surface chemical treatments to posts", Int Endod J, 39, pp.31~39 (2006)
- Sahafi A, "Bond strength of resin cement to dentin and to surface-treated posts of titanium alloy, glass fiber, and zirconia", J Adhes Dent, 5, pp.153~162 (2003)
- Sahafi A, "Gotfredsen K. Retention and failure morphology of prefabricated posts", Int J Prosthodont, 17, pp.307~312 (2004)
- Albashaireh ZS, "Effects of endodontic post surface treatment, dentin conditioning, and artificial aging on the retention of glass fiber-reinforced composite resin posts", J Prosthet Dent, 103, pp.31~39 (2010)
- Magni E, "Adhesion between fiber posts and resin luting agents: a microtensile bond strength test and an SEM investigation following different treatments of the post surface", J Adhes Dent, 9, pp.195~202 (2007)
- Balbosh A, "Effect of surface treatment on retention of glass-fiber endodontic posts", J Prosthet Dent, 95, pp.218~223 (2006)
- Ramin Mosharraf, "Effects of post surface conditioning before silanization on bond strength between fiber post and resin cement", The Journal of Advanced of Prosthodontics, 5(2), pp.126~132 (2013), 대한치과보철학회[DOI]
- Albashaireh ZS, "Effect of dentin conditioning on retention of airborne-particleabraded, adhesively luted glass fiber-reinforced resin posts", J Prosthet Dent, 100, pp.367~373 (2008)
- Plotino G, "Flexural properties of endodontic posts and human root dentin", Dent Mater, 23, pp.1129~1135 (2007)
- Stewardson DA, "The flexural properties of endodontic post materials", Dent Mater, 26, pp.730~736 (2010)
- Lassila LV, "Flexural properties of fiber reinforced root canal posts", Dent Mater, 20, pp.29~36 (2004)
- Braga NM, "Flexural properties, morphology and bond strength of fiber-reinforced posts: influence of post pretreatment", Braz Dent J, 23, pp.679~685 (2012)