FRC-포스트의 표면처리가 레진시멘트와의 접착력에 미치는 영향
Effect of surface treatment of FRC-Post on bonding strength to resin cements
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
연구목적: Silane 처리가 FRC-포스트와 레진 시멘트 간의 결합강도에 미치는 영향을 알아보고자 하였다. 연구 재료 및 방법: FRC-포스트로 LuxaPost (DMG)와 Rely-X Fiber Post (3M ESPE)를 사용하였으며 자가 접착 레진시멘트인 Rely-X Unicem (3M ESPE)과 전통형 레진시멘트인 Rely-X ARC (3M ESPE)와의 Rely-X Ceramic Primer (3M ESPE)를 이용한 표면처리 유무에 따른 결합강도를 push-out test를 실시하여 측정하고 independent samples t-test 및 one-way ANOVA와 Scheffe 사후검정을 95% 유의수준에서 실시하였다. 결과: 실험 결과 Rely-X Fiber Post를 사용한 실험군에서 silane 처리와 관계없이 Rely-X ARC를 적용하였을 때, 다른 실험군들에 비해 높은 결합 강도가 나타났으며 LuxaPost를 사용한 실험군에서 각각의 레진 시멘트에 대해 silane 처리를 하였을 때 시행하지 않은 실험군에 비해 높은 결합 강도가 나타났다. 결론: 이상의 실험 결과로 볼 때 미리 silane 처리된 LuxaPost를 사용하더라도 silane 처리를 시행하는 것이 좋은 것으로 생각된다.
Abstract
Objectives: The purpose of this study was to evaluate the effect of surface treatment of FRC-Post on bonding strength to resin cements. Materials and Methods: Pre-surface treated LuxaPost (DMG), Rely-X Fiber Post (3M ESPE) and self adhesive resin cement Rely-X Unicem (3M ESPE), conventional resin cement Rely-X ARC (3M ESPE), and Rely-X Ceramic Primer (3M ESPE) were used. After completing the surface treatments of the posts, posts and resin cement were placed in clear molds and photo-activation was performed. The specimens were sectioned perpendicular to the FRC-Post into 2 mm-thick segments, and push-out strength were measured. The results of bond strength value were statistically analyzed using independent samples t-test and oneway ANOVA with multiple comparisons using Scheffe's test. Results: Silanization of posts affect to the bond strength in LuxaPost, and did not affect in Rely-X Fiber Post. Rely-X ARC showed higher value than Rely-X Unicem. Conclusions: Silanization is needed to enhance the bond strength between LuxaPost and resin cements. [J Kor Acad Cons Dent 2011;36(2):125-131.]
참고문헌 (22)
- Aksornmuang J, "Microtensile bond strength of a dure-cure resin core material to glass and quartz fibre posts", J Dent, 32, pp.443~450 (2004)
- Ferrari M, "An investigation of the interfacial strengths of methacrylate resin-based glass fiber post-core buildups", J Adhes Dent, 8, pp.239~245 (2006)
- Monticelli F, "Surface treatments for improving bond strength to prefabricated fiber posts: a literature review", Oper Dent, 33, pp.346~355 (2008)
- Radovic I, "The effect of sandblasting on adhesion of a dual-cured resin composite to methacrylic fiber posts: Microtensile bond strength and SEM evaluation", J Dent, 35, pp.496~502 (2007)
- Monticelli F, "Improving the quality of the quartz fiber postcore bond using sodium ethoxide etching and combined silane", adhesive coupling, 2006, pp.32, 447~451
- Radovic I, "Coupling of composite resin cements to quartz fiber posts: a comparison of industrial and chairside treatments of the post surface", J Adhes Dent, 10, pp.57~66 (2008)
- Perdiga¨o J, "The effect of silane on the bond strengths of fiber posts", Dent Mater, 22, pp.752~758 (2006)
- Rathke A, "Effectiveness of bonding fiber posts to root canals and composite core build-ups", Eur J Oral Sci, 117, pp.604~610 (2009)
- Goracci C, "The adhesion between fiber posts and root canal walls: comparison between microtensile and push-out bond strength measurements", Eur J Oral Sci, 112, pp.353~361 (2004)
- 금혜조, "섬유포스트의 표면 처리방법이 복합레진 코어와의 결합력에 미치는 영향", Restorative Dentistry and Endodontics, 35(3), pp.173~179 (2010), 대한치과보존학회
- Kamada K, "Effect of four silane coupling agents on bonding of two resinmodified glass ionomer cements to a machinable ceramic", Dent Mater J, 26, pp.240~244 (2007)
- Monticelli F, "Resistance to thermo-mechanical stress of different coupling agents used as intermediate layer in resin-fiber post bonds", Am J Dent, 20, pp.416~420 (2007)
- Erdemir U, "Micro push-out bond strengths of 2 fiber post types luted using different adhesive strategies", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 110, pp.534~544 (2010)
- 조민우, "레진시멘트의 접착 내구성에 관한 연구", Restorative Dentistry and Endodontics, 32(4), pp.343~355 (2007), 대한치과보존학회
- Pavan S, "The effect of dentin pretreatment on the microtensile bond strength of self-adhesive resin cements", J Prosthet Dent, 104, pp.258~264 (2010)
- Valandro LF, "Microtensile bond strength between a quartz fiber post and a resin cement: effect of post surface conditioning", J Adhes Dent, 8, pp.105~111 (2006)
- Vano M, "The adhesion between fibre posts and composite resin cores: the evaluation of microtensile bond strength following various surface chemical treatments to posts", Int Endod J, 39, pp.31~39 (2006)
- Monticelli F, "Post-surface conditioning improves interfacial adhesion in post", core restorations, 2006, pp.22, 602~609
- Jongsma LA, "Influence of surface pretreatment of fiber posts on cement delamination", Dent Mater, 26, pp.901~907 (2010)
- Gerth HU, "Chemical analysis and bonding reaction of RelyXUnicem and Bifix composites-a comparative study", Dent Mater, 22, pp.934~941 (2006)
- Habekost Lde V, "Tensile bond strength and flexural modulus of resin cements-influence on the fracture resistance of teeth restored with ceramic inlays", Oper Dent, 32, pp.488~495 (2007)
- 김문홍, "레진시멘트의 중합방법이 포스트의 결합강도와 접착계면에 미치는 영향", Restorative Dentistry and Endodontics, 34(2), pp.103~112 (2009), 대한치과보존학회