섬유포스트의 표면 처리방법이 복합레진 코어와의 결합력에 미치는 영향
EFFECT OF SURFACE TREATMENTS OF FIBER POSTS ON BOND STRENGTH TO COMPOSITE RESIN CORES
3
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
본 연구의 목적은 실란, 과산화수소, 불산, 샌드블라스팅을 이용한 섬유포스트의 표면 처리가 복합레진 코어와의 결합강도에미치는 영향을 평가하기 위한 것이다. 32개의 FRC Postec Plus를 표면 처리를 하지 않은 대조군과 표면 처리 방법에 따라 7개의 실험군(S군, HP군, HP-S군,HF군, HF-S군, SB군, SB-S군)으로 분류하였다. S군은 실란을 적용하였고, HP군은 28%의 과산화수소로 부식하였으며,HP-S군은 과산화수소 처리 후 실란을 적용하였다. HF군은 4% 불화수소산 젤로 부식하였고, HF-S군은 불화수소산 젤 처리후 실란으로 처리하였다. SB군은 산화 알루미늄으로 샌드블라스팅 하였고, SB-S군은 샌드블라스팅 후 실란을 적용하였다. 표면 처리한 포스트는 Tetric Flow를 사용하여 광중합 시키면서 주위에 원통형의 코어를 축조하였다. 형성된 포스트-코어 복합체를 막대 형태로 절단하여 미세인장결합강도를 측정하였다. One-way ANOVA와 LSD test로 결합강도 값을 분석한 결과,샌드블라스팅은 섬유포스트와 복합레진 코어와의 결합력을 증가시켰으며 샌드블라스팅 후 실란으로 처리한 경우 다른 처리 방법들보다 유의하게 증가된 결합력을 나타냈다(p < 0.05).
Abstract
The purpose of the present study was to compare the influence of post-surface treatment with silane,hydrogen peroxide, hydrofluoric acid or sandblasting and to investigate the effect of silane in combination of the other treatments on the microtensile bond strength between fiber posts and composite resins for core build-up. Thirty-two glass-fiber posts (FRC Postec Plus, Ivoclar Vivadent, Schaan, Liechtenstein) were divided into eight groups according to the different surface pretreatments performed: silane application (S); immersion in 28% hydrogen peroxide (HP); immersion in hydrogen peroxide followed by application of silane (HP-S); immersion in 4% hydrofluoric acid gel (HF); immersion in hydrofluoric acid gel followed by application of silane (HF-S); sandblasting with aluminum oxide particles (SB); sandblasting followed by application of silane (SB-S). In control group, no surface treatment was performed. The composite resin (Tetric Flow, Ivoclar Vivadent, Schaan, Liechtenstein) was applied onto the posts to produce the composite cylinder specimen. It was sectioned into sticks to measure the microtensile bond strength. The data was analyzed with one-way ANOVA and LSD test for post hoc comparison (p < 0.05). Post pretreatment with sandblasting enhanced the interfacial strength between the fiber posts and core materials. Moreover, sandblasting followed by application of silane appears to be the most effective method that can improve the clinical performance of glass fiber posts. [J Kor Acad Cons Dent 35(3):173-179, 2010]
참고문헌 (27)
- Ferrari M, "Clinical evaluation of fiber-reinforced epoxy resin posts and cast post and cores", Am J Dent, 13(S), pp.15~18 (2000)
- 김문홍, "레진시멘트의 중합방법이 포스트의 결합강도와 접착계면에 미치는 영향", 대한치과보존학회지, 34(2), pp.103~112 (2009), 대한치과보존학회
- Pegoretti A, "Finite element analysis of a glass fiber reinforced composite endodontic post", Biomaterials, 23, pp.2667~2682 (2002)
- Hyun-A Lee, "Comparison of bond strength of a fiber post cemented with various resin cements", J Kor Acad Cons Dent, 33(6), pp.499~506 (2008)
- Ferrari M, "Retrospective study of the clinical performance of fiber posts", Am J Dent, 13, pp.9~13 (2000)
- Monticelli F, "Clinical behavior of translucent fiber post: a 2-year prospective study", Int J Prosthodont, 16, pp.593~596 (2003)
- 신수일, "수종 코어용 복합레진 수복재의 물성에 관한 연구", 대한치과보존학회지, 29(2), pp.191~199 (2004), 대한치과보존학회
- Vano M, "The adhesion between fibre posts and composite resin cores: the evaluation of microtensile bond strength following various surface chemical treatments to posts", Int Endod J, 39, pp.31~39 (2006)
- Aksornmuang J, "Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre posts", J Dent, 32, pp.443~450 (2004)
- Monticelli F, "Scanning electron microscopic evaluation of fiber post-resin core units built up with different resin composites", Am J Dent, 18, pp.61~65 (2005)
- Goracci C, "The adhesion between fiber posts and composite resin cores: Microtensile bond strength with and without post silanization", Dent Mater, 21(5), pp.437~444 (2005)
- Aksornmuang J, "Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre posts", J Dent, 32, pp.443~450 (2004)
- Perdigao J, "The effect of silane on the bond strength of fiber posts", Dent Mater, 22(8), pp.752~758 (2006)
- Bitter K, "Effect of silanization on bond strength of fiber posts to various resin cements", Quintessence Int, 38(2), pp.121~128 (2007)
- Sahafi A, "Bond strength of resin cement to dentin and to surface- treated posts of titanium alloy, glass fiber, and zirconia", J Adhes Dent, 5, pp.153~162 (2003)
- Sahafi A, "Effect of surface treatment of prefabricated posts on bonding of resin cement", Oper Dent, 29, pp.60~68 (2004)
- Valandro LF, "Microntensile bond strength between a quartz fiber post and a resin cement: effect of post surface conditioning", J Adhes Dent, 8, pp.105~111 (2006)
- Baldissara P, "Effect of root canal treatments on quartz fibre posts bonding to root dentin", J Endod, 32, pp.985~988 (2006)
- Perdigao J, "The effect of silane on the bond strengths of fiber posts", Dent Mater, 22, pp.752~758 (2006)
- Pirani C, "Does hybridization of intraradicular dentin really improve fiber post retention in endodontically treated teeth?", J Endod, 31, pp.891~894 (2005)
- Monticelli F, "Clinical behavior of translucent- fiber posts: a 2-year prospective study", Int J Prosthodont, 16, pp.593~596 (2003)
- Radovic I, "The effect of sandblasting on adhesion of a dual-cured resin composite to methacrylate fiber posts: microtensile bond strength and SEM evaluation", J Dent, 35, pp.496~502 (2007)
- Balbosh A, "Effect of surface treatment on retention of glass-fiber endodontic posts", J Prosthet Dent, 95, pp.218~223 (2006)
- Magni E, "Adhesion between fiber posts and resin luting agents: a microtensile bond strength test and an SEM investigation following different treatments of the post surface", J Adhes Dent, 9, pp.195~202 (2007)
- Valandro LF, "Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning", J Adhes Dent, 8, pp.175~181 (2006)
- Mazzitelli C, "Surface roughness analysis of fiber post conditioning processes", J Dent Res, 87, pp.186~190 (2008)
- Monticelli F, "A simple etching technique for improving the retention of fiber posts to resin composites", J Endod, 32, pp.44~47 (2006)