Mechanical properties related to the microstructure of seven different fiber reinforced composite posts
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this in vitro study was to evaluate the mechanical properties (bending strength and hardness) of seven different fiber reinforced composite posts, in relation to their microstructural characteristics. MATERIALS AND METHODS. Two hundred eighty posts were divided into seven groups of 40, one group for each type of post analyzed. Within each group, 15 posts were subjected to three-point bending strength test, 15 to a microhardess meter for the Knoop hardness, and 10 to Scanning Electron Microscope in order to determine the diameter of the fibers and the percentage of fibers embedded in the matrix. To compare the flexural strength in relation to the type of fiber, matrix, and the hardness of the posts, a Kruskal-Wallis H test was used. The Jonckheere-Terpstra test was used to determine if the volume percent of fibers in the post influenced the bending strength. RESULTS. The flexural strength and the hardness depended on the type of fibers that formed the post. The lower flexural strength of a post could be due to deficient bonding between the fiber and the resin matrix. CONCLUSION. According to the results, other factors, besides the microstructural characteristics, may also influence the mechanical properties of the post. The feature that has more influence on the mechanical properties of the posts is the type of fiber.
Abstract
PURPOSE. The aim of this in vitro study was to evaluate the mechanical properties (bending strength and hardness) of seven different fiber reinforced composite posts, in relation to their microstructural characteristics. MATERIALS AND METHODS. Two hundred eighty posts were divided into seven groups of 40, one group for each type of post analyzed. Within each group, 15 posts were subjected to three-point bending strength test, 15 to a microhardess meter for the Knoop hardness, and 10 to Scanning Electron Microscope in order to determine the diameter of the fibers and the percentage of fibers embedded in the matrix. To compare the flexural strength in relation to the type of fiber, matrix, and the hardness of the posts, a Kruskal-Wallis H test was used. The Jonckheere-Terpstra test was used to determine if the volume percent of fibers in the post influenced the bending strength. RESULTS. The flexural strength and the hardness depended on the type of fibers that formed the post. The lower flexural strength of a post could be due to deficient bonding between the fiber and the resin matrix. CONCLUSION. According to the results, other factors, besides the microstructural characteristics, may also influence the mechanical properties of the post. The feature that has more influence on the mechanical properties of the posts is the type of fiber.
참고문헌 (35)
- Fernandes AS, "Factors determining post selection: a literature review", J Prosthet Dent, 90, pp.556~562 (2003)
- Asmussen E, "Stiffness, elastic limit, and strength of newer types of endodontic posts", J Dent, 27, pp.275~278 (1999)
- Schwartz RS, "Post placement and restoration of endodontically treated teeth: a literature review", J Endod, 30, pp.289~301 (2004)
- Al-Wahadni AM, "Fracture resistance of teeth restored with different post systems: in vitro study", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 106, pp.e77~e83 (2008)
- Cheung W, "A review of the management of endodontically treated teeth. Post, core and the final restoration", J Am Dent Assoc, 136, pp.611~619 (2005)
- Ree M, "The endo-restorative interface: current concepts", Dent Clin North Am, 54, pp.345~374 (2010)
- Lassila LV, "Flexural properties of fiber reinforced root canal posts", Dent Mater, 20, pp.29~36 (2004)
- Forberger N, "Influence of the type of post and core on in vitro marginal continuity, fracture resistance, and fracture mode of lithia disilicate-based all-ceramic crowns", J Prosthet Dent, 100, pp.264~273 (2008)
- Sirimai S, "An in vitro study of thefracture resistance and the incidence ofvertical root fracture of pulpless teeth restored with six post-and-coresystems", J Prosthet Dent, 81, pp.262~269 (1999)
- Stewardson DA, "The flexural properties of endodontic post materials", Dent Mater, 26, pp.730~736 (2010)
- Drummond JL, "Static and cyclic loading of fiberreinforced dental resin", Dent Mater, 19, pp.226~231 (2003)
- Galhano GA, "Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts", J Endod, 31, pp.209~211 (2005)
- Seefeld F, "Resistance to fracture and structural characteristics of different fiber reinforced post systems", Dent Mater, 23, pp.265~271 (2007)
- Mannocci F, "Three-point bending test of fiber posts", J Endod, 27, pp.758~761 (2001)
- Cheleux N, "Mechanical properties of glass fiberreinforced endodontic posts", Acta Biomater, 5, pp.3224~3230 (2009)
- Dietschi D, "Evaluation of post and cores in the laboratory: rationale for developing a fatigue test and preliminary results", Compend Contin Educ Dent Suppl, pp.S65~S73 (1996)
- Boksman L, "The clinical significance of mechanical properties in retentive posts", Compend Contin Educ Dent, 34, pp.446~455 (2013)
- Plotino G, "Flexural properties of endodontic posts and human root dentin", Dent Mater, 23, pp.1129~1135 (2007)
- Zicari F, "Mechanical properties and micro-morphology of fiber posts", Dent Mater, 29, pp.e45~e52 (2013)
- Newman MP, "Fracture resistance of endodontically treated teeth restored with composite posts", J Prosthet Dent, 89, pp.360~367 (2003)
- Dietschi D, "Biomechanical considerations for the restoration of endodontically treated teeth: a systematic review of the literature-Part 1. Composition and micro- and macrostructure alterations", Quintessence Int, 38, pp.733~743 (2007)
- Ferrari M, "Long-term retrospective study of the clinical performance of fiber posts", Am J Dent, 20, pp.287~291 (2007)
- Cagidiaco MC, "Clinical studies of fiber posts: a literature review", Int J Prosthodont, 21, pp.328~336 (2008)
- Bitter K, "Post-endodontic restorations with adhesively luted fiber-reinforced composite post systems: a review", Am J Dent, 20, pp.353~360 (2007)
- Grandini S, "Fatigue resistance and structural characteristics of fiber posts:three-point bending test and SEM evaluation", Dent Mater, 21, pp.75~82 (2005)
- Abdulmajeed AA, "The effect of high fiber fraction on some mechanical properties of unidirectional glass fiber-reinforced composite", Dent Mater, 27, pp.313~321 (2011)
- Vallittu PK, "The effect of void space and polymerization time on transverse strength of acrylic-glass fibre composite", J Oral Rehabil, 22, pp.257~261 (1995)
- Miettinen VM, "Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin", J Prosthet Dent, 77, pp.531~534 (1997)
- Chieruzzi M, "Compressive and flexural behaviour of fibre reinforced endodontic posts", J Dent, 40, pp.968~978 (2012)
- Torbjörner A, "A literature review on the prosthetic treatment of structurally compromised teeth", Int J Prosthodont, 17, pp.369~376 (2004)
- Naumann M, "10-year survival evaluation for glass-fiber-supported postendodontic restoration: a prospective observational clinical study", J Endod, 38, pp.432~435 (2012)
- Balkenhol M, "Survival time of cast post and cores: a 10-year retrospective study", J Dent, 35, pp.50~58 (2007)
- Baba NZ, "Nonmetallic prefabricated dowels: a review of compositions, properties, laboratory, and clinical test results", J Prosthodont, 18, pp.527~536 (2009)
- Bottino MA, "Effects of mechanical cycling on the bonding of zirconia and fiber posts to human root dentin", J Adhes Dent, 9, pp.327~331 (2007)
- Kurtz JS, "Bond strengths of tooth-colored posts, effect of sealer, dentin adhesive, and root region", Am J Dent, 16, pp.31A~36A (2003)