Bilayered all Ceramics에서 Core와 Veneer 계면의 전단결합강도에 관한 연구
A Study on Shear Bond Strength of Core-veneer Interface for Bilayered all Ceramics
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구의 목적은 전부 도재관 시스템에서 코어-비니어 결합계면에서의 결합 강도를 평가하는데 있다. 본 연구에서 사용되어진 전부 도재관 시스템은 IPS Empress2 with IPS Eris, IPS e.max Press with IPS e.max Ceram과 IPS e.max ZirCAD with IPS e.max Ceram이다. 제조사의 지시에 따라 코어(N=36, N=12/system, 직경: 10mm, 두께: 3mm)를 제작하였고 초음파 세척을 시행하였다. 특별히 제작된 스테인리스 스틸 몰드를 이용하여 코어 상부에 비니어(직경: 3mm, 두께: 2mm)를 축성한 후 소성하였다. 소성 후, 초음파 세척을 시행하고 아크릴릭 레진에 매몰하였다. 제작된 시편은 37℃의 증류수에 1주일간 보관하였다. 만능시험기(Z020, Zwick, Germany)로 시편의 전단결합강도를 측정하였고, 하중이 코어-비니어 계면에 가능한 가깝게 가해지도록 시편을 위치시키고, 파절이 일어날 때까지 1.00mm/min의 crosshead speed로 하중을 가하였다. 측정된 각 군의 평균전단결합강도(MPa±SD)에 대한 통계적 유의성을 검증하기 위해 일원 분산분석을 시행하였으며, 사후검정은 Tukey test를 이용하였다(p=0.05). 또한 파절된 시편을 주사전자현미경(JSM-6360,JEOL, Japan)으로 파절양상을 관찰하였다. 파절양상은 코어 내에서의 응집성 파절, 비니어 내에서의 응집성 파절, 혼합형 파절 혹은 접착성 파절로 분류하였다. 코어와 비니어 계면에서의 평균전단결합강도(MPa±SD)는 IPS-e.max Press가 32.85±6.75 MPa, IPS Empress 2가 29.30±6.51 MPa, IPS e.max ZirCAD가 28.10±4.28 MPa로 나타났다. 통계적 분석 결과 각 시스템 간에서 유의한 차이가 없었다(P>0.05). 어떠한 시스템에서도 접착성 파절은 관찰되지 않았다. IPS Empress 2와 IPS e.max Press에서는 코어와 비니어 내에서의 응집성 파절이 관찰되었으며, IPS e.max ZirCAD에서는 혼합형 파절과 비니어 내에서의 응집성 파절이 관찰되었다.
Abstract
Purpose: The purpose of this study was to investigate the bond strength of the core-veneer interface in all ceramic systems. Material and Methods: The all ceramic systems tested with their respective veneer were IPS Empress 2 with IPS Eris, IPS e.max Press with IPS e.max Ceram and IPS-e.max ZirCAD with IPS e.max Ceram. Cores (N=36, N=12/group, diameter: 10mm, thickness: 3mm) were fabricated according to the manufacturer's instruction and cleaned with ultrasonic cleaner. The veneer(diameter: 3mm, thickness: 2mm) were condensed in stainless steel mold and fired on to the core materials. After firing, they were again ultrasonically cleaned and embedded in acrylic resin. The specimens were stored in distilled water at 37℃ for 1 week. The specimens were placed in a mounting jig and subjected to shear force in a universal testing machine(Z020, Zwick, Germany). Load was applied at close to the core-veneer interface as possible with crosshead speed of 1.00mm/min until failure. Average shear bond strengths(MPa) were analyzed with a one-way analysis of variance and the Tukey test(α=.05). The failed specimens were examinated by scanning electron microscopy(JSM-6360, JEOL, Japan). The pattern of failure was classified as cohesive in core, cohesive in veneer, mixed or adhesive. Results: The mean shear bond strength(MPa±SD) were IPS e.max Press 32.85±6.75 MPa, IPS Empress 2 29.30±6.51 MPa, IPS e.max ZirCAD 28.10±4.28 MPa. IPS Empress 2, IPS e.max Press, IPS e.max ZirCAD were not significantly different from each others. Scanning electron microscopy examination revealed that adhesive failure did not occur in any all ceramic systems. IPS Empress 2 and IPS e.max Press exhibited cohesive failure in both the core and the veneer. IPS e.max ZirCAD exhibited cohesive failure in veneer and mixed failure.
참고문헌 (37)
- Rosenblum MA, "A review of all- ceramic restorations", J Am Dent Assoc, 128, pp.297~307 (1997)
- Kelly JR, "Ceramics in dentistry: historical roots and current perspectives", J Prosthet Dent, 75, pp.18~32 (1996)
- Land CH, "Porcelain dental art", Dent Cosmos, 45, pp.437~444 (1903)
- McLean JW, "The reinforcement of dental porcelain with ceramic oxides", Br Dent J, 119, pp.251~254 (1966)
- Kingery WD, "Introduction to ceramics", pp.371~ (1976)
- Vita Zahnfabrik, "Vita Hi-Ceram working instruction" (1988), Bad Sackingen
- "Optec HSP Laboratory technique manual", ~, pp.지침서 (1988)
- Clause H, "Vita In-Ceram a new system for producing aluminum oxide crown and bridge substructures", Quintessenz Zahntech, 16, pp.35~46 (1990)
- Dong JK, "Heat- pressed ceramics: Technology and strength", Int J Prosthodont, 5, pp.9~16 (1992)
- Mackert JR, "Leucite crystallization during processing of a heat-pressed dental ceramics", 9, pp.261~265 (1996)
- Holand W, "A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass- ceramics", J Biomed Mater Res, 53, pp.297~303 (2000)
- Holand W, "Materials science fundamentals of the IPS Empress 2 glass-ceramics", Ivoclar Vivadent Report, 12, pp.3~10 (1998)
- Schweiger M, "IPS Empress 2: A new pressable high strength glass-ceramic for esthetic all-ceramic restorations", Quintessence Dent Technol, 22, pp.143~151 (1999)
- Holaud W, "Materials science fundamentals of the IPS Empress 2 glass-ceramic", Ivoclar Vivadent Report, 12, pp.3~10 (1998)
- Severance G, "Introducing a lithium disilicate glass-ceramic : IPS Empress2", Signature, 4, pp.1~3 (1999)
- Sorensen JA, "Research evaluations of a lithium disilicate restorative system : IPS Empress2", Signature, 4, pp.4~10 (1999)
- Al-Dohan HM, "Shear strength of core-veneer interface in bi-layered ceramics", J Prosthet Dent, 91, pp.349~355 (2004)
- Kelly JR, "Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling", J Dent Res, 74, pp.1253~1258 (1995)
- Guazzato M, "Strength, reliability, and mode of fracture of bilayered porcelain", core ceramics, 2004, pp.17, 142~149
- Aboushelib M, "Microtensile bond strength of different components of core veneered all-ceramic restorations", Dent Mater, 21, pp.984~991 (2005)
- Ozcan M, "Fracture reasons in ceramic-fused-to-metal restorations", J Oral Rehabil, 30, pp.265~269 (2003)
- Luthy H, "Effects of veneering and glazing on the strength of heat pressed ceramics", Schweiz Monatsschr Zahnmed, 103, pp.1257~1260 (1993)
- Jeong HC, "Fracture strength of zirconia monolithic crowns", J Korean Acad Prosthodent, 44(2), pp.157~164 (2006)
- Isqro G, "The influence of veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic", J Prosthet Dent, 90, pp.465~473 (2003)
- Al-shehri SA, "Influence of lamination on the flexure strength of dental castable glass ceramic", J Prosthet Dent, 76, pp.23~28 (1996)
- Blatz MB, "Long-term clinical success of all-ceramics posterior restorations", Quintessence Int, 33, pp.415~426 (2002)
- Craig RG, "Mechanical properties in restorative dental materials", pp.551~592 (2002), Mosby
- Dundar M, "Bond strengths of veneering ceramics to rein forced ceramic core materials", Int J Prosthodont, 18, pp.71~72 (2005)
- Smith TB, "In vitro fracture behavior of ceramic and metal ceramic restorations", J Prosthodont, 3, pp.138~144 (1994)
- Guazzato M, "Strength, Fracture toughness and microstructure of a selection af all ceramic materials. Part Ⅰ. Pressable and alumina glass infiltrated ceramics", Dent Mater, 20, pp.441~448 (2004)
- Albakry M, "Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials", J Dentistry, 31, pp.181~188 (2003)
- Luthardt RG, "Zirconia-TZP and alumina-advanced technologies for the manufacturing of single crowns", Eur J Prosthodont Restor Dent, 4, pp.113~119 (1999)
- Aboushelib, M, "Microtensile bond strength of different components of core veneered all-ceramic restorations. Part Ⅱ: Zirconia veneering ceramics", Dent Mater, 21, pp.984~991 (2005)
- Anusavice KJ, "Comparative evaluation of ceramic-metal bond tests using finite element stress analysis", J Dent Res, 59, pp.608~613 (1980)
- Fairhurst CW, "Dynamic fatigue of felsphatic porcelain", Dent Mater, 9, pp.269~273 (1993)
- Green DJ, "An introduction to the mechanical properties of ceramics" (1998), Cambridge University Press
- Marx R, "Crack parameters and Weibull moduli: subcritical crack growth and long term durability of all ceramic materials", Dtsch Zahnarztl Z, 56, pp.90~98 (2001)