Effect of fluoride-containing gel on the roughness of a titanium surface and the promotion of bacterial growth
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Purpose: The aim of this study was to evaluate whether fluorides at various pH cause changes in the surface roughness of titanium implants that alter the adherence of bacterial biofilms. Materials and Methods: The titanium disks were assigned randomly to the following seven groups according to the fluoride agents and application time (1 minute or 30 minute) used: control (no treatment); group 1 (1.23% acidulated phosphate fluoride [APF] at pH 3.5 for 1 minute); group 2 (1.23% APF at pH 3.5 for 30 minute); group 3 (1.23% APF at pH 4.0 for 1 minute); group 4 (1.23% APF at pH 4.0 for 30 minute); group 5 (2% NaF gel at pH 7.0 for 1 minute); group 6 (2% NaF gel at pH 7.0 for 30 minute). The surface roughness of the titanium disks and the amount of adherent bacteria were measured. Results: Group 2 showed a significantly greater surface roughness than the control group (P < 0.0001). No significant differences in the amount of surface bacteria were observed between the treated samples and the controls. In addition, there were no significant differences in bacterial adherence relative to the incubation period between the treated samples and the controls. Conclusion: The surface roughness of the titanium disks was significantly greater after treatment with APF at pH 3.5 for 30 min compared with that of the controls. In addition, we found that the amount of Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibactor actinomycetemcomitans was similar among all groups
Abstract
Purpose: The aim of this study was to evaluate whether fluorides at various pH cause changes in the surface roughness of titanium implants that alter the adherence of bacterial biofilms. Materials and Methods: The titanium disks were assigned randomly to the following seven groups according to the fluoride agents and application time (1 minute or 30 minute) used: control (no treatment); group 1 (1.23% acidulated phosphate fluoride [APF] at pH 3.5 for 1 minute); group 2 (1.23% APF at pH 3.5 for 30 minute); group 3 (1.23% APF at pH 4.0 for 1 minute); group 4 (1.23% APF at pH 4.0 for 30 minute); group 5 (2% NaF gel at pH 7.0 for 1 minute); group 6 (2% NaF gel at pH 7.0 for 30 minute). The surface roughness of the titanium disks and the amount of adherent bacteria were measured. Results: Group 2 showed a significantly greater surface roughness than the control group (P < 0.0001). No significant differences in the amount of surface bacteria were observed between the treated samples and the controls. In addition, there were no significant differences in bacterial adherence relative to the incubation period between the treated samples and the controls. Conclusion: The surface roughness of the titanium disks was significantly greater after treatment with APF at pH 3.5 for 30 min compared with that of the controls. In addition, we found that the amount of Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibactor actinomycetemcomitans was similar among all groups
참고문헌 (30)
- Adell R, "A 15-year study of osseointegrated implants in the treatment of the edentulous jaw", Int J Oral Surg, 10, pp.387~416 (1981)
- Buser D, "Longterm evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multi-center study with 2359 implants", Clin Oral Implants Res, 8, pp.161~172 (1997)
- Romeo E, "Long-term survival and success of oral implants in the treatment of full and partial arches: a 7-year prospective study with the ITI dental implant system", Int J Oral Maxillofac Implants, 19, pp.247~259 (2004)
- Zitzmann NU, "Definition and prevalence of peri-implant diseases", J Clin Periodontol, 35, pp.286~291 (2008)
- Heitz-Mayfield LJ, "Peri-implant diseases: diagnosis and risk indicators", J Clin Periodontol, 35, pp.292~304 (2008)
- Quirynen M, "Distribution of bacterial morphotypes around natural teeth and titanium implants ad modum Brånemark", Clin Oral Implants Res, 1, pp.8~12 (1990)
- Pontoriero R, "Experimentally induced periimplant mucositis. A clinical study in humans", Clin Oral Implants Res, 5, pp.254~259 (1994)
- Leonhardt A, "Putative periodontal pathogens on titanium implants and teeth in experimental gingivitis and periodontitis in beagle dogs", Clin Oral Implants Res, 3, pp.112~119 (1992)
- Leonhardt A, "Microbial findings at failing implants", Clin Oral Implants Res, 10, pp.339~345 (1999)
- Quirynen M, "The influence of surface free energy and surface roughness on early plaque formation. An in vivo study in man", J Clin Periodontol, 17, pp.138~144 (1990)
- Bollen CM, "The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis", Clin Oral Implants Res, 7, pp.201~211 (1996)
- Teughels W, "Effect of material characteristics and", or surface topography on biofilm development, 2006, pp.17(Suppl 2), 68~81
- Quirynen M, "The influence of surface roughness and surface-free energy on supra- and subgingival plaque formation in man. A review of the literature", J Clin Periodontol, 22, pp.1~14 (1995)
- Bollen CM, "Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature", Dent Mater, 13, pp.258~269 (1997)
- Aykent F, "Effect of different finishing techniques for restorative materials on surface roughness and bacterial adhesion", J Prosthet Dent, 103, pp.221~227 (2010)
- Dionysopoulos P, "The effect of home-use fluoride gels on glass-ionomer, compomer and composite resin restorations", J Oral Rehabil, 30, pp.683~689 (2003)
- Benderli Y, "Effect of APF gel on micromorphology of resin modified glassionomer cements and flowable compomers", J Oral Rehabil, 32, pp.669~675 (2005)
- Walker MP, "Mechanical properties and surface characterization of beta titanium and stainless steel orthodontic wire following topical fluoride treatment", Angle Orthod, 77, pp.342~348 (2007)
- Khoury ES, "Effect of a two-year fluoride decay protection protocol on titanium brackets", Int Orthod, 9, pp.432~451 (2011)
- Stájer A, "Effect of caries preventive products on the growth of bacterial biofilm on titanium surface", Acta Microbiol Immunol Hung, 59, pp.51~61 (2012)
- Pröbster L, "Effect of fluoride prophylactic agents on titanium surfaces", Int J Oral Maxillofac Implants, 7, pp.390~394 (1992)
- Hix JO, "The relationship between cemental caries, oral hygiene status and fermentable carbohydrate intake", J Periodontol, 47, pp.398~404 (1976)
- Ravald N, "Prediction of root surface caries in patients treated for advanced periodontal disease", J Clin Periodontol, 8, pp.400~414 (1981)
- Cobb HB, "A clinical study of the caries preventive effects of an APF solution and APF thixotropic gel", Pediatr Dent, 2, pp.263~266 (1980)
- Horowitz HS, "The effect on dental caries of topically applied acidulated phosphatefluoride:results after three years", J Am Dent Assoc, 82, pp.359~365 (1971)
- Reclaru L, "Effects of fluorides on titanium and other dental alloys in dentistry", Biomaterials, 19, pp.85~92 (1998)
- Schiff N, "Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys", Biomaterials, 23, pp.1995~2002 (2002)
- Toniollo MB, "Effect of fluoridecontaining solutions on the surface of cast commercially pure titanium", Braz Dent J, 20, pp.201~204 (2009)
- Amoroso PF, "Titanium surface modification and its effect on the adherence of Porphyromonas gingivalis: an in vitro study", Clin Oral Implants Res, 17, pp.633~637 (2006)
- Kim YJ, "Effect of acidulated phosphate fluoride (APF) gel on the adherence of cariogenic bacteria to resin composites", Am J Dent, 18, pp.91~94 (2005)