여러 레진계 치아고정 재료의 굴곡강도 및 탄성계수 비교
Comparison of flexural strength and modulus of elasticity in several resinous teeth splinting materials
0
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
목적: 본 연구의 목적은 수종의 레진계 치아고정 재료의 굴곡강도와 탄성계수를 비교 분석하는 것이다. 연구 재료 및 방법: 레진계 치아고정 재료로 Super-Bond C&B (SB), G-FIX (GF), G-aenial Universal Flo (GU), Filtek Z350 XT (FZ)를 이용하여 각 군당 15개씩 총 60개의 시편을 제작하였다. 3점 굽힘 시험으로 측정된 값에 따라 굴곡강도 와 탄성계수를 계산하였다. 실험값은 One-way ANOVA test로 분석하고, Scheffe’s test로 사후 검정하였다. 결과: 본 연구의 결과 SB는 다른 재료들과 비교 시 가장 낮은 굴곡강도를 보였으며 GF, GU, FZ는 비슷하게 높은 굴곡강도를 보였다. 탄성계수의 경우 SB가 가장 낮은 값을 보였고 GF는 SB보다는 높지만 GU와 FZ보다는 낮은 탄성계수를 보였으며 GU와 FZ는 유의하게 높은 탄성계수를 보였다. 결론: 동요치 고정을 목적으로 새로 개발된 GU (G-FIX)는 유동성 복합 레진과 수복용 복합 레진과 같이 높은 강도를 보이며 잘 파절되지 않으면서도 상대적으로 유연한 성질을 보여 동요치 고정에 유리할 것으로 사료된다.
Abstract
Purpose: Direct splinting material should have high flexural strength to withstand force during mastication and low modulus of elasticity to provide some movement while force applied for relief of stress. The purpose of this study was to compare flexural strength and modulus of elasticity of several resinous splinting materials. Materials and Methods: Four materials; Super-Bond C&B, G-FIX, G-aenial Universal Flo, FiltekTM Z350 XT; were used in this study. Fifteen rectangular bar specimens of each material were prepared. Three-point bending test were performed to determine physical properties. Maximum load at fracture was recorded and flexural strength and modulus of elasticity were calculated. One-way analysis of variance (ANOVA) and Scheffe’s tests at a 0.05 level of significance were conducted on all test results. Results: Statistical analysis reveals that Super-Bond C&B had significant low mean value for flexible strength and the other three materials showed no significant difference. For modulus of elasticity, Super-Bond C&B exhibited statistically lower modulus of elasticity. G-FIX presented intermediate result, showing statistically higher modulus of elasticity than Super-Bond C&B but lower than G-aenial Universal Flo and FiltekTM Z350 XT. There was no significant difference on modulus of elasticity between G-aenial Universal Flo and FiltekTM Z350 XT. Conclusion: Using a G-FIX, the newly commercially available splinting material, which shows higher fracture resistance properties comparable to flowable and restorative composite resin and a relatively flexible nature might be a beneficial for stabilizing teeth mobility.
참고문헌 (22)
- Bernal G, "A review of the clinical management of mobile teeth", J Contemp Dent Pract, 3, pp.10~22 (2002)
- Mazzoleni S, "In vitro comparison of the flexibility of different splint systems used in dental traumatology", Dent Traumatol, 26, pp.30~36 (2010)
- Wood M, "Ten-year clinical and microscopic evaluation of resin-bonded restorations", Quintessence Int, 27, pp.803~807 (1996)
- Burcak Cengiz S, "Biomechanical effects of splint types on traumatized tooth: a photoelastic stress analysis", Dent Traumatol, 22, pp.133~138 (2006)
- Andreasen JO, "Healing of 400 intra-alveolar root fractures. 2. Effect of treatment factors such as treatment delay, repositioning, splinting type and period and antibiotics", Dent Traumatol, 20, pp.203~211 (2004)
- Andreasen JO, "Textbook and color atlas of traumatic injuries to the teeth", pp.842~849 (2007), Blackwell Munksgaard
- von Arx T, "Splinting of traumatized teeth with focus on adhesive techniques", J Calif Dent Assoc, 33, pp.409~414 (2005)
- Bauss O, "Effect of different splinting methods and fixation periods on root development of autotransplanted immature third molars", J Oral Maxillofac Surg, 63, pp.304~310 (2005)
- von Arx T, "Comparison of a new dental trauma splint device (TTS) with three commonly used splinting techniques", Dent Traumatol, 17, pp.266~274 (2001)
- Filippi A, "Comfort and discomfort of dental trauma splints - a comparison of a new device (TTS) with three commonly used splinting techniques", Dent Traumatol, 18, pp.275~280 (2002)
- Prévost J, "An in vitro study of the passivity of splints in dental trauma", J Dent, 26, pp.39~45 (1998)
- Prévost J, "Management of dental trauma: development of a 2D data acquisition system to evaluate passivity of dental splints", Med Biol Eng Comput, 35, pp.409~414 (1997)
- Menendez ME, "A prospective randomized clinical trial of prescription of full-time versus as-desired splint wear for de Quervain tendinopathy", Int Orthop, 39, pp.1563~1569 (2015)
- Monteiro GQ, "Evaluation of linear polymerization shrinkage, flexural strength and modulus of elasticity of dental composites", Mater Res, 13, pp.51~55 (2010)
- Hofmann N, "Comparison of photo-activation versus chemical or dual-curing of resin-based luting cements regarding flexural strength, modulus and surface hardness", J Oral Rehabil, 28, pp.1022~1028 (2001)
- Anusavice KJ, "Phillips' science of dental materials", pp.410~ (2003), Saunders
- Kawaguchi M, "Effect of monomer structure on the mechanical properties of light-cured unfilled resins", Dent Mater J, 7, pp.174~181 (1988)
- Chang M, "Physical property evaluation of four composite materials", Oper Dent, 38, pp.E144~E153 (2013)
- Azillah MA, "Long-term flexural strength of three direct aesthetic restorative materials", J Dent, 26, pp.177~182 (1998)
- Attar N, "Flow, strength, stiffness and radiopacity of flowable resin composites", J Can Dent Assoc, 69, pp.516~521 (2003)
- Yap AU, "Effectiveness of polymerization in composite restoratives claiming bulk placement: impact of cavity depth and exposure time", Oper Dent, 25, pp.113~120 (2000)
- Yap AU, "Comparison of flexural properties of composite restoratives using the ISO and mini-flexural tests", J Oral Rehabil, 30, pp.171~177 (2003)