동요치 고정에 사용되는 복합레진의 색품질 평가
Color quality evaluation of composite resins used for splinting teeth
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Purpose: The purpose of this study was to evaluate the color stability of composite resins used for splinting teeth by comparing a self-cure resin cement (Superbond C&B, SB), a flowable composite resin (G-aenial Universal Flo A2, GU), and a composite resin exclusively used for splinting teeth (G-Fix, GF) before and after aging in NaOCl. Methods: Resin samples were fabricated to a size of 2 mm thickness and 8.5 mm diameter and light-cured with an LED light curing unit (G-Light, n = 12). Immediately after fabrication, CIE L*a*b* values of the resin samples were measured with a spectrophotometer (CM-5) as baseline. Then, the resin samples were immersed in 5% NaOCl at 60 ℃ and the color was measured after 23 hours every day for 4 days. Data were analyzed with one-way ANOVA followed by Duncan post hoc test (p<0.05), and color differences (ΔE) of resin samples before and after NaOCl aging were also calculated. Results: For SB, there were no changes in L* and a* values but changes were observed in b* values. For GU, there were no changes in L* and b* values but in a* values. For GF, changes were observed in L*, a*, and b* values. All resin samples showed highest ΔE between baseline and the 1st day of NaOCl immersion. ΔE of SB, GU, and GF was 4.6 – 5.8, 4.9 – 7.9, and 9.9 – 16.9, respectively. GF showed highest color change during NaOCl aging. Conclusion: The results of this color quality evaluation showed that the composite resin exclusively used for splinting teeth might be more vulnerable to color change during intraoral service.
Abstract
Purpose: The purpose of this study was to evaluate the color stability of composite resins used for splinting teeth by comparing a self-cure resin cement (Superbond C&B, SB), a flowable composite resin (G-aenial Universal Flo A2, GU), and a composite resin exclusively used for splinting teeth (G-Fix, GF) before and after aging in NaOCl. Methods: Resin samples were fabricated to a size of 2 mm thickness and 8.5 mm diameter and light-cured with an LED light curing unit (G-Light, n = 12). Immediately after fabrication, CIE L*a*b* values of the resin samples were measured with a spectrophotometer (CM-5) as baseline. Then, the resin samples were immersed in 5% NaOCl at 60 ℃ and the color was measured after 23 hours every day for 4 days. Data were analyzed with one-way ANOVA followed by Duncan post hoc test (p<0.05), and color differences (ΔE) of resin samples before and after NaOCl aging were also calculated. Results: For SB, there were no changes in L* and a* values but changes were observed in b* values. For GU, there were no changes in L* and b* values but in a* values. For GF, changes were observed in L*, a*, and b* values. All resin samples showed highest ΔE between baseline and the 1st day of NaOCl immersion. ΔE of SB, GU, and GF was 4.6 – 5.8, 4.9 – 7.9, and 9.9 – 16.9, respectively. GF showed highest color change during NaOCl aging. Conclusion: The results of this color quality evaluation showed that the composite resin exclusively used for splinting teeth might be more vulnerable to color change during intraoral service.
참고문헌 (27)
- Alaa’a MS, "Effect of 5.25% sodium hypochlorite on color stability of acrylic and silicone based soft liners and a denture base acrylic resin", J Indian Prosthodont Soc, 14(2), pp.179~186 (2014)
- Antonov M, "Changes of Color and Fluorescence of Resin Composites Immersed in Beer", J Esthet Restor Dent, 28(5), pp.330~338 (2016)
- Bernal G, "A review of the clinical management of mobile teeth", J Contemp Dent Pract, 3(4), pp.10~22 (2002)
- Chang H-S, "Effects of layering technique on the shade of resin overlays and the microhardness of dual cure resin cement", Braz Oral Res, 28(1), pp.1~6 (2014)
- 조규정, "복합레진의 표면거칠기에 따른 투명도와 표면 색상의 차이에 관한 연구", Restorative Dentistry and Endodontics, 31(4), pp.312~322 (2006), 대한치과보존학회
- Davi LR, "Effect of the physical properties of acrylic resin of overnight immersion in sodium hypochlorite solution", Gerodontology, 27(4), pp.297~302 (2010)
- Eldiwany M, "Color stability of light-cured and post-cured composites", Am J Dent, 8(4), pp.179~181 (1995)
- Ertas E, "Color stability of resin composites after immersion in different drinks", Dent Mater J, 25(2), pp.371~376 (2006)
- Kang A, "The color stability of silorane-and methacrylate-based resin composites", Dent Mater J, 31(5), pp.879~884 (2012)
- Kim YI, "A multidisciplinary approach for the management of pathologic tooth migration in a patient with moderately advanced periodontal disease", Int J Periodont Rest Dent, 32(2), pp.225~230 (2012)
- King KA, "Variations of L* a* b* Values among Vitapan® Classical Shade Guides", J Prosthodont, 16(5), pp.352~356 (2007)
- Komine F, "Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns", J Prosthet Dent, 92(4), pp.359~364 (2004)
- Kumbuloglu O, "Pilot study of unidirectional E-glass fibre-reinforced composite resin splints: up to 4.5-year clinical follow-up", J Dent, 39(12), pp.871~877 (2011)
- Liu X, "Retrospective study of combined splinting restorations in the aesthetic zone of periodontal patients", Brit Dent J, 220(5), pp.241~247 (2016)
- Malhotra N, "Effect of Three Indigenous Food Stains on Resin‐Based, Microhybrid‐, and Nanocomposites", J Esthet Restor Dent, 23(4), pp.250~257 (2011)
- Monaghan P, "Composite resin color change after vital tooth bleaching", J Prosthet Dent, 67(6), pp.778~781 (1992)
- Ortengren U, "Water sorption and flexural properties of a composite resin cement", Int J Prosthodont, 13(2), pp.141~147 (2000)
- Sabatini C, "Color stability of ten resin-based restorative materials", J Esthet Restor Dent, 24(3), pp.185~199 (2012)
- Sarac D, "The effect of polishing techniques on the surface roughness and color change of composite resins", J Prosthet Dent, 96(1), pp.33~40 (2006)
- Shotwell J, "Color stability of long-term soft denture liners", J Prosthet Dent, 68(5), pp.836~838 (1992)
- Vichi A, "Color and opacity variations in three different resin-based composite products after water aging", Dent Mater, 20(6), pp.530~534 (2004)
- Villalta P, "Effects of staining and bleaching on color change of dental composite resins", J Prosthet Dent, 95(2), pp.137~142 (2006)
- W. T. Wozniak, "Proposed guidelines for the acceptance program for dental shade guides", American dental association, 1~2 (1987)
- Yazici AR, "The effect of curing units and staining solutions on the color stability of resin composites", Oper Dent, 32(6), pp.616~622 (2007)
- 유제인, "여러 레진계 치아고정 재료의 굴곡강도 및 탄성계수 비교", 구강회복응용과학지, 32(3), pp.169~175 (2016), 대한턱관절교합학회[DOI]
- 윤종현, "저점도 벌크필레진과 복합레진 적층수복물의 색조 평가", 구강회복응용과학지, 31(4), pp.294~300 (2015), 대한턱관절교합학회[DOI]
- Zhang X, "Effects of ultraviolet aging on color and translucency of composite resin cements", West China J Stomatol, 27(2), pp.175~177 (2009)