The effect of occlusogingival placement of clinical bracket points on the adaptation of a straight wire to the lingual arch form
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: The aim of this study is to compare the adaptation of a straight wire between brackets positioned at the mid-lingual surface and those placed gingivally by using a three-dimensional simulation software. Methods: This cross-sectional study was performed using OrthoAid, an in-house software. The subjects were 36 adolescents with normal Class I occlusion. For each dental cast, two bracket positioning approaches, namely the middle and gingival, were examined. In the middle group, the reference points were placed on the mid-lingual surface of each tooth, while in the gingival group, the reference points were positioned lingually on the anterior teeth. A 4th degree polynomial was adopted, and the in-plane and off-plane root mean squares (RMSs) of the distances between the reference points and the fitted polynomial curve were calculated using the software. Statistical analysis was performed using the paired-samples t-test (a = 0.05). Results: The mean in-plane RMS of the polynomial curve to the bracket distance in the gingival group was significantly lower than that in the middle group (p < 0.001). The off-plane RMS was higher in the gingivally positioned brackets in the maxilla than in the middle group (p < 0.001). However, the off-plane RMS in mandible was not statistically significantly different between the two groups (p = 0.274). Conclusions: The results demonstrated that the gingival placement of lingual brackets on the anterior teeth could decrease the distance between a tooth and the straight wire.[Korean J Orthod 2018;48(4):236-244]
Abstract
Objective: The aim of this study is to compare the adaptation of a straight wire between brackets positioned at the mid-lingual surface and those placed gingivally by using a three-dimensional simulation software. Methods: This cross-sectional study was performed using OrthoAid, an in-house software. The subjects were 36 adolescents with normal Class I occlusion. For each dental cast, two bracket positioning approaches, namely the middle and gingival, were examined. In the middle group, the reference points were placed on the mid-lingual surface of each tooth, while in the gingival group, the reference points were positioned lingually on the anterior teeth. A 4th degree polynomial was adopted, and the in-plane and off-plane root mean squares (RMSs) of the distances between the reference points and the fitted polynomial curve were calculated using the software. Statistical analysis was performed using the paired-samples t-test (a = 0.05). Results: The mean in-plane RMS of the polynomial curve to the bracket distance in the gingival group was significantly lower than that in the middle group (p < 0.001). The off-plane RMS was higher in the gingivally positioned brackets in the maxilla than in the middle group (p < 0.001). However, the off-plane RMS in mandible was not statistically significantly different between the two groups (p = 0.274). Conclusions: The results demonstrated that the gingival placement of lingual brackets on the anterior teeth could decrease the distance between a tooth and the straight wire.[Korean J Orthod 2018;48(4):236-244]
참고문헌 (30)
- Fujita K, "New orthodontic treatment with lingual bracket mushroom arch wire appliance", Am J Orthod, 76, pp.657~675 (1979)[DOI]
- Kurz C, "Lingual orthodontics: a status report. Part 2: Research and development", J Clin Orthod, 16, pp.735~740 (1982)
- Takemoto K, "Lingual straight wire method", Int Orthod, 7, pp.335~353 (2009)[DOI]
- 2.0.CO;2,
- Balut N, "Variations in bracket placement in the preadjusted orthodontic appliance", Am J Orthod Dentofacial Orthop, 102, pp.62~67 (1992)[DOI]
- Geron S, "The lingual bracket jig", J Clin Orthod, 33, pp.457~463 (1999)
- Stamm T, "Relation between second and third order problems in lingual orthodontic treatment", J Ling Orthod, 1, pp.5~ (2000)
- Geron S, "Vertical forces in labial and lingual orthodontics applied on maxillary incisors--a theoretical approach", Angle Orthod, 74, pp.195~201 (2004)
- Liang W, "Torque control of the maxillary incisors in lingual and labial orthodontics: a 3-dimensional finite element analysis", Am J Orthod Dentofacial Orthop, 135, pp.316~322 (2009)[DOI]
- Kyung Hee Park, "New classification of lingual arch form in normal occlusion using three dimensional virtual models", 대한치과교정학회지, 45(2), pp.74~81 (2015), 대한치과교정학회
- Wiechmann D, "Customized brackets and archwires for lingual orthodontic treatment", Am J Orthod Dentofacial Orthop, 124, pp.593~599 (2003)[DOI]
- Takemoto K, "The straight-wire concept in lingual orthodontics", J Clin Orthod, 35, pp.46~52 (2001)
- Nouri M, "Objective vs subjective analyses of arch form and preformed archwire selection", Am J Orthod Dentofacial Orthop, 149, pp.543~554 (2016)[DOI]
- Padisar P, "Changes in mandibular anterior teeth alignment of 12-14 years oldsduring a 4-years follow up in Qazvin", Iranian J Orthod, 3, pp.109~115 (2008)
- Nouri M, "Evaluation of number of reference clinical points effect on dental arch curve construction with three-dimensional method", J Indian Dent Assoc, 24, pp.104~110 (2012)
- Nouri M, "The accuracy of a 3-D laser scanner for crown width measurements", Aust Orthod J, 25, pp.41~47 (2009)
- Thurow RC, "Edgewise orthodontics", pp.327~ (1982), Mosby
- Archambault A, "A comparison of torque expressionbetween stainless steel, titanium molybdenum alloy, and copper nickel titanium wires in metallic selfligatingbrackets", Angle Orthod, 80, pp.884~889 (2010)[DOI]
- Morina E, "Torque expression of self-ligating brackets comparedwith conventional metallic, ceramic, and plastic brackets", Eur J Orthod, 30, pp.233~238 (2008)[DOI]
- Sifakakis I, "A comparative assessment of torque generated by lingual and conventional brackets", Eur J Orthod, 35, pp.375~380 (2013)[DOI]
- Manni A, "Personalized orthodontic bracket height in relation to marginal ridges", World J Orthod, 8, pp.e10~e14 (2007)
- Scuzzo G, "A new lingual straight-wire technique", J Clin Orthod, 44, pp.114~123 (2010)
- Fillion D, "Clinical advantages of the Orapix-straight wire lingual technique", Int Orthod, 8, pp.125~151 (2010)
- Fillion D, "Lingual straightwire treatment with the Orapix system", J Clin Orthod, 45, pp.488~497 (2011)
- Lombardo L, "A new concept of anatomic lingual arch form", Am J Orthod Dentofacial Orthop, 138, pp.260.e1~260.e13 (2010)
- Oda S, "Commercially available archwire forms compared with normal dental arch forms in a Japanese population", Am J Orthod Dentofacial Orthop, 137, pp.520~527 (2010)[DOI]
- Kairalla SA, "Determining shapes and dimensions of dental arches for the use of straight- wire arches in lingual technique", Dental Press J Orthod, 19, pp.116~122 (2014)[DOI]
- Felton JM, "A computerized analysis of the shape and stability of mandibular arch form", Am J Orthod Dentofacial Orthop, 92, pp.478~483 (1987)[DOI]
- AlHarbi S, "Mathematical analyses of dental arch curvature in normal occlusion", Angle Orthod, 78, pp.281~287 (2008)[DOI]
- Noroozi H, "The dental arch form revisited", Angle Orthod, 71, pp.386~389 (2001)