Effects of direct and indirect bonding techniques on bond strength and microleakage after thermocycling
3
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: The purpose of this study was to compare the shear bond strength (SBS) of brackets and microleakage of a tooth-adhesive-bracket complex bonded with a direct and an indirect bonding technique after thermocycling. Methods: Fifty non-carious human premolars were divided into two equal groups. In the direct bonding group a light-cured adhesive and a primer (Transbond XT) was used. In the indirect-bonding group, a light-cured adhesive (Transbond XT) and chemical-cured primer (Sondhi Rapid Set) were used. After polymerization, the teeth were kept in distilled water for 24 hours and thereafter subjected to thermal cycling (500 cycles). For the microleakage evaluation, 10 teeth from each group were further sealed with nail varnish, stained with 0.5% basic fuchsin for 24 hours, and examined under a stereomicroscope. Fifteen teeth from each group were used for SBS testing with the universal testing machine and adhesive remnant index (ARI) evaluation. Data were analyzed using the Mann-Whitney U test, Chi-square test, and Fisher’s exact test. Results: There were no statistical differences on SBS and microleakage between the two bonding techniques. The indirect bonding group had a significantly lower ARI score. Bracket failures were obtained between enamel-resin interfaces. Conclusions: The type of bonding technique did not significantly affect the amount of microleakage and SBS.
Abstract
Objective: The purpose of this study was to compare the shear bond strength (SBS) of brackets and microleakage of a tooth-adhesive-bracket complex bonded with a direct and an indirect bonding technique after thermocycling. Methods: Fifty non-carious human premolars were divided into two equal groups. In the direct bonding group a light-cured adhesive and a primer (Transbond XT) was used. In the indirect-bonding group, a light-cured adhesive (Transbond XT) and chemical-cured primer (Sondhi Rapid Set) were used. After polymerization, the teeth were kept in distilled water for 24 hours and thereafter subjected to thermal cycling (500 cycles). For the microleakage evaluation, 10 teeth from each group were further sealed with nail varnish, stained with 0.5% basic fuchsin for 24 hours, and examined under a stereomicroscope. Fifteen teeth from each group were used for SBS testing with the universal testing machine and adhesive remnant index (ARI) evaluation. Data were analyzed using the Mann-Whitney U test, Chi-square test, and Fisher’s exact test. Results: There were no statistical differences on SBS and microleakage between the two bonding techniques. The indirect bonding group had a significantly lower ARI score. Bracket failures were obtained between enamel-resin interfaces. Conclusions: The type of bonding technique did not significantly affect the amount of microleakage and SBS.
참고문헌 (34)
- Buonocore MG, "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", J Dent Res, 34, pp.849~853 (1955)
- Newman GV, "Bonding plastic orthodontic attachments to tooth enamel", JNJ Dent Soc, 35, pp.346~358 (1964)
- Silverman E, "Current adhesives for indirect bracket bonding", Am J Orthod, 65, pp.76~84 (1974)
- Thomas RG, "Indirect bonding: simplicity in action", J Clin Orthod, 13, pp.93~106 (1979)
- Miles PG, "A comparison of two indirect bonding adhesives", Angle Orthod, 75, pp.1019~1023 (2005)
- Aguirre MJ, "Assessment of bracket placement and bond strength when comparing direct bonding to indirect bonding techniques", Am J Orthod, 82, pp.269~276 (1982)
- Hocevar RA, "Indirect versus direct bonding: bond strength and failure location", Am J Orthod Dentofacial Orthop, 94, pp.367~371 (1988)
- Linn BJ, "A comparison of bond strength between direct- and indirect-bonding methods", Angle Orthod, 76, pp.289~294 (2006)
- Daub J, "Bond strength of direct and indirect bonded brackets after thermocycling", Angle Orthod, 76, pp.295~300 (2006)
- Arhun N, "Microleakage beneath ceramic and metal brackets bonded with a conventional and an antibacterial adhesive system", Angle Orthod, 76, pp.1028~1034 (2006)
- James JW, "Effects of high-speed curing devices on shear bond strength and microleakage of orthodontic brackets", Am J Orthod Dentofacial Orthop, 123, pp.555~561 (2003)
- Ulker M, "Microleakage under orthodontic brackets using high-intensity curing lights", Angle Orthod, 79, pp.144~149 (2009)
- Klocke A, "Effect of time on bond strength in indirect bonding", Angle Orthod, 74, pp.245~250 (2004)
- Klocke A, "Custom base preaging in indirect bonding", Angle Orthod, 74, pp.106~111 (2004)
- Sondhi A, "Efficient and effective indirect bonding", Am J Orthod Dentofacial Orthop, 115, pp.352~359 (1999)
- "International Organization for Standardization Technical Specification Report (ISO", TS 11405:2003), 2003
- Artun J, "Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment", Am J Orthod, 85, pp.333~340 (1984)
- Reynolds IR, "Direct bonding of orthodontic brackets - a comparative study of adhesives", Br J Orthod, 3, pp.143~146 (1976)
- Polat O, "In vitro evaluation of shear bond strengths and in vivo analysis of bond survival of indirect-bonding resins", Angle Orthod, 74, pp.405~409 (2004)
- Klocke A, "Bond strength with custom base indirect bonding techniques", Angle Orthod, 73, pp.176~180 (2003)
- Yi GK, "Shear bond strength comparison between direct and indirect bonded orthodontic brackets", Am J Orthod Dentofacial Orthop, 124, pp.577~581 (2003)
- Bishara SE, "Effect of thermocycling on the shear bond strength of a cyanoacrylate orthodontic adhesive", Am J Orthod Dentofacial Orthop, 123, pp.21~24 (2003)
- Sinha PK, "Bond strengths and remnant adhesive resin on debonding for orthodontic bonding techniques", Am J Orthod Dentofacial Orthop, 108, pp.302~307 (1995)
- Taylor MJ, "Microleakage", J Dent, 20, pp.3~10 (1992)
- Ramoglu SI, "Microleakage under ceramic and metallic brackets bonded with resin-modified glass ionomer", Angle Orthod, 79, pp.138~143 (2009)
- Gillgrass TJ, "Fluoride release, microbial inhibition and microleakage pattern of two orthodontic band cements", J Dent, 27, pp.455~461 (1999)
- Mehl A, "Physical properties and gap formation of light-cured composites with and without ‘softstart-polymerization’", J Dent, 25, pp.321~330 (1997)
- Ferracane JL, "Relationship between composite contraction stress and leakage in class V cavities", Am J Dent, 16, pp.239~243 (2003)
- Calheiros FC, "Polymerization contraction stress of low-shrinkage composites and its correlation with microleakage in class V restorations", J Dent, 32, pp.407~412 (2004)
- Burgess JO, "An evaluation of four light-curing units comparing soft and hard curing", Pract Periodontics Aesthet Dent, 11, pp.125~132 (1999)
- Oesterle LJ, "Rapid curing of bonding composite with a xenon plasma arc light", Am J Orthod Dentfacial Orthop, 119, pp.610~616 (2001)
- Celiberti P, "Use of a self etching adhesive on previously etched intact enamel and its effect on sealant microleakage and tag formation", J Dent, 33, pp.163~171 (2005)
- Kubo S, "Microleakage of self etching primers after thermal and flexural load cycling", Am J Dent, 14, pp.163~169 (2001)
- Arıkan S, "Microleakage beneath ceramic and metal brackets photopolymerized with LED or conventional light curing units", Angle Orthod, 76, pp.1035~1040 (2006)