Posterior dental compensation and occlusal function in adults with different sagittal skeletal malocclusions
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson’s correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions. [Korean J Orthod 2020;50(2):98-107]
Abstract
Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson’s correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions. [Korean J Orthod 2020;50(2):98-107]
참고문헌 (30)
- Angle EH, "Treatment of malocclusion of the teeth:angle's system" (1907), White Dental Manufacturing Company
- Hwang S, "Three-dimensional evaluation of dentofacial transverse widths in adults with different sagittal facial patterns", Am J Orthod Dentofacial Orthop, 154, pp.365~374 (2018)
- Verma TP, "Bite force recording devices-a review", J Clin Diagn Res, 11, pp.ZE01~ZE05 (2017)
- 최윤정, "교정 치료 후 교합력, 교합면적의 변화", 대한치과교정학회지, 40(3), pp.176~183 (2010), 대한치과교정학회
- Sultana MH, "Changes in occlusal force and occlusal contact area after active orthodontic treatment : a pilot study using pressuresensitive sheets", J Oral Rehabil, 29, pp.484~491 (2002)
- Suzuki T, "Evaluation of complete denture occlusal contacts using pressure-sensitive sheets", Int J Prosthodont, 10, pp.386~391 (1997)
- Okiyama S, "Association between masticatory performance and maximal occlusal force in young men", J Oral Rehabil, 30, pp.278~282 (2003)
- Proffit WR, "Occlusal forces in normal-and long-face adults", J Dent Res, 62, pp.566~570 (1983)
- Riedel RA, "The relation of maxillary structures to cranium in malocclusion and in normal occlusion", Angle Orthod, 22, pp.142~145 (1952)
- Ahn J, "Transverse dental compensation in relation to sagittal and transverse skeletal discrepancies in skeletal Class III patients", Am J Orthod Dentofacial Orthop, 151, pp.148~156 (2017)
- Kitafusa Y, "Application of"prescale"as an aid to clinical diagnosis in orthodontics", Bull Tokyo Dent Coll, 45, pp.99~108 (2004)
- Ross IF, "Occlusal contacts of the natural teeth", J Prosthet Dent, 32, pp.660~667 (1974)
- Braun S, "A study of bite force, part 2: relationship to various cephalometric measurements", Angle Orthod, 65, pp.373~377 (1995)
- Slaj M, "Dental archforms in dentoalveolar Class I, II and III", Angle Orthod, 80, pp.919~924 (2010)
- Lux CJ, "Dental arch widths and mandibular-maxillary base widths in Class II malocclusions between early mixed and permanent dentitions", Angle Orthod, 73, pp.674~685 (2003)
- Baccetti T, "Early dentofacial features of Class II malocclusion : a longitudinal study from the deciduous through the mixed dentition", Am J Orthod Dentofacial Orthop, 111, pp.502~509 (1997)
- Franchi L, "Transverse maxillary deficiency in Class II and Class III malocclusions : a cephalometric and morphometric study on postero-anterior films", Orthod Craniofac Res, 8, pp.21~28 (2005)
- Wang YL, "Patterns and forces of occlusal contacts during lateral excursions recorded by the T-Scan II system in young Chinese adults with normal occlusions", J Oral Rehabil, 38, pp.571~578 (2011)
- Owens S, "Masticatory performance and areas of occlusal contact and near contact in subjects with normal occlusion and malocclusion", Am J Orthod Dentofacial Orthop, 121, pp.602~609 (2002)
- Hyejoon Lee, "Comparison of occlusal contact areas of class I and class II molar relationships at finishing using three-dimensional digital models", 대한치과교정학회지, 45(3), pp.113~120 (2015), 대한치과교정학회
- Yoon W, "Changes in occlusal function after extraction of premolars : 2-year follow-up", Angle Orthod, 87, pp.703~708 (2017)
- Ando K, "Bite force measurement system using pressure-sensitive sheet and silicone impression material", Dent Mater J, 28, pp.212~218 (2009)
- Koc D, "Bite force and influential factors on bite force measurements : a literature review", Eur J Dent, 4, pp.223~232 (2010)
- Maness WL, "Distribution of occlusal contacts in maximum intercuspation", J Prosthet Dent, 62, pp.238~242 (1989)
- Bakke M, "Bite force and occlusion", Semin Orthod, 12, pp.120~126 (2006)
- Roldán SI, "Are maximum bite forces of subjects 7to 17 years of age related to malocclusion", Angle Orthod, 86, pp.456~461 (2015)
- English JD, "Does malocclusion affect masticatory performance", Angle Orthod, 72, pp.21~27 (2002)
- Toro A, "Masticatory performance in children and adolescents with Class I and II malocclusions", Eur J Orthod, 28, pp.112~119 (2006)
- Al-Nimri KS, "Functional occlusal patterns and their relationship to static occlusion", Angle Orthod, 80, pp.65~71 (2010)
- Al-Hiyasat AS, "The relationship between static and dynamic occlusion in 14-17-yearold school children", J Oral Rehabil, 31, pp.628~633 (2004)