Mandibular skeletal posterior anatomic limit for molar distalization in patients with Class III malocclusion with different vertical facial patterns
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to compare the differences in mandibular posterior anatomic limit (MPAL) distances stratified by vertical patterns in patients with skeletal Class III malocclusion by using cone-beam computed tomography (CBCT). Methods: CBCT images of 48 patients with skeletal Class III malocclusion (mean age, 22.8 ± 3.1 years) categorized according to the vertical patterns (hypodivergent, normodivergent, and hyperdivergent; n = 16 per group) were analyzed. While parallel to the posterior occlusal line, the shortest linear distances from the distal root of the mandibular second molar to the inner cortex of the mandibular body were measured at depths of 4, 6, and 8 mm from the cementoenamel junction. MPAL distances were compared between the three groups, and their correlations were analyzed. Results: The mean ages, sex distribution, asymmetry, and crowding in the three groups showed no significant differences. MPAL distance was significantly longer in male (3.8 ± 2.6 mm) than in female (1.8 ± 1.2 mm) at the 8-mm root level. At all root levels, MPAL distances were significantly different in the hypodivergent and hyperdivergent groups (p < 0.001) and between the normodivergent and hyperdivergent groups (p < 0.01). MPAL distances were the shortest in the hyperdivergent group. The mandibular plane angle highly correlated with MPAL distances at all root levels (p < 0.01). Conclusions: MPAL distances were the shortest in patients with hyperdivergent patterns and showed a decreasing tendency as the mandibular plane angle increased. MPAL distances were significantly shorter (~3.16 mm) at the 8-mm root level.
Abstract
Objective: The aim of this study was to compare the differences in mandibular posterior anatomic limit (MPAL) distances stratified by vertical patterns in patients with skeletal Class III malocclusion by using cone-beam computed tomography (CBCT). Methods: CBCT images of 48 patients with skeletal Class III malocclusion (mean age, 22.8 ± 3.1 years) categorized according to the vertical patterns (hypodivergent, normodivergent, and hyperdivergent; n = 16 per group) were analyzed. While parallel to the posterior occlusal line, the shortest linear distances from the distal root of the mandibular second molar to the inner cortex of the mandibular body were measured at depths of 4, 6, and 8 mm from the cementoenamel junction. MPAL distances were compared between the three groups, and their correlations were analyzed. Results: The mean ages, sex distribution, asymmetry, and crowding in the three groups showed no significant differences. MPAL distance was significantly longer in male (3.8 ± 2.6 mm) than in female (1.8 ± 1.2 mm) at the 8-mm root level. At all root levels, MPAL distances were significantly different in the hypodivergent and hyperdivergent groups (p < 0.001) and between the normodivergent and hyperdivergent groups (p < 0.01). MPAL distances were the shortest in the hyperdivergent group. The mandibular plane angle highly correlated with MPAL distances at all root levels (p < 0.01). Conclusions: MPAL distances were the shortest in patients with hyperdivergent patterns and showed a decreasing tendency as the mandibular plane angle increased. MPAL distances were significantly shorter (~3.16 mm) at the 8-mm root level.
참고문헌 (32)
- Yamada K, "Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region", Angle Orthod, 79, pp.78~84 (2009)
- Oh YH, "Treatment effects of microimplant-aided sliding mechanics on distal retraction of posterior teeth", Am J Orthod Dentofacial Orthop, 139, pp.470~481 (2011)
- Kim SJ, "Mandibular posterior anatomic limit for molar distalization", Am J Orthod Dentofacial Orthop, 146, pp.190~197 (2014)
- Edwards JG, "A study of the anterior portion of the palate as it relates to orthodontic therapy", Am J Orthod, 69, pp.249~273 (1976)
- Handelman CS, "The anterior alveolus : its importance in limiting orthodontic treatment and its influence on the occurrence of iatrogenic sequelae", Angle Orthod, 66, pp.95~109 (1996)
- Nakada T, "Cone-beam computed tomography evaluation of the association of cortical plate proximity and apical root resorption after orthodontic treatment", J Oral Sci, 58, pp.231~236 (2016)
- Ganss C, "Prognosis of third molar eruption", Oral Surg Oral Med Oral Pathol, 76, pp.688~693 (1993)
- Begtrup A, "Predicting lower third molar eruption on panoramic radiographs after cephalometric comparison of profile and panoramic radiographs", Eur J Orthod, 35, pp.460~466 (2013)
- Kim TW, "Prevalence of third molar impaction in orthodontic patients treated nonextraction and with extraction of 4 premolars", Am J Orthod Dentofacial Orthop, 123, pp.138~145 (2003)
- Karad A, "Clinical orthodontics: current concepts, goals and mechanics", pp.251~ (2015), Elsevier
- Hardy D, "Prevalence of angle class III malocclusion : a systematic review and metaanalysis", Open J Epidemiol, 2, pp.75~82 (2012)
- Proffit WR, "Contemporary orthodontics", pp.684~ (2013), Mosby
- Choi YT, "Bone availability for mandibular molar distalization in adults with mandibular prognathism", Angle Orthod, 88, pp.52~57 (2018)
- Horner KA, "Cortical bone and ridge thickness of hyperdivergent and hypodivergent adults", Am J Orthod Dentofacial Orthop, 142, pp.170~178 (2012)
- Masumoto T, "Relationships among facial type, buccolingual molar inclination, and cortical bone thickness of the mandible", Eur J Orthod, 23, pp.15~23 (2001)
- Ge J, "Variations in the buccal-lingual alveolar bone thickness of impacted mandibular third molar : our classification and treatment perspectives", Sci Rep, 6, pp.16375~ (2016)
- Wainwright WM, "Faciolingual tooth movement : its influence on the root and cortical plate", Am J Orthod, 64, pp.278~302 (1973)
- Lemos Rinaldi MR, "Cone-beam computed tomography evaluation of bone plate and root length after maxillary expansion using tooth-borne and tooth-tissue-borne banded expanders", Am J Orthod Dentofacial Orthop, 154, pp.504~516 (2018)
- Ingervall B, "Masticatory muscle force and facial morphology in man", Arch Oral Biol, 23, pp.203~206 (1978)
- Kiliaridis S, "Muscle function and craniofacial morphology : a clinical study in patients with myotonic dystrophy", Eur J Orthod, 11, pp.131~138 (1989)
- Beckmann SH, "Alveolar and skeletal dimensions associated with lower face height", Am J Orthod Dentofacial Orthop, 113, pp.498~506 (1998)
- Veli I, "Buccal cortical bone thickness at miniscrew placement sites in patients with different vertical skeletal patterns", J Orofac Orthop, 75, pp.417~429 (2014)
- Park HS, "Orthodontic treatment using microimplant:clinical applications of microimplant anchorage", pp.349~352 (2015), DaehanNarae Publishing, Inc
- Vinay G, "Sex determination of human mandible using metrical parameters", J Clin Diagn Res, 7, pp.2671~2673 (2013)
- Van der Weijden F, "Alveolar bone dimensional changes of post-extraction sockets in humans : a systematic review", J Clin Periodontol, 36, pp.1048~1058 (2009)
- Verna C, "Regional acceleratory phenomenon", Front Oral Biol, 18, pp.28~35 (2016)
- Hansson S, "Alveolar ridge resorption after tooth extraction : a consequence of a fundamental principle of bone physiology", J Dent Biomech, 3, pp.1758736012456543~ (2012)
- de los Rios CM, "Biometric study of the width, length and depth of the root trunk groove of human lower second molars", Pesqui Odontol Bras, 16, pp.26~30 (2002)
- Poletti L, "Dentoalveolar class III treatment using retromolar miniscrew anchorage", Prog Orthod, 14, pp.7~ (2013)
- Kook YA, "Distalization of the mandibular dentition with a ramal plate for skeletal Class III malocclusion correction", Am J Orthod Dentofacial Orthop, 150, pp.364~377 (2016)
- Jonghan Yu, "Treatment effects of mandibular total arch distalization using a ramal plate", 대한치과교정학회지, 46(4), pp.212~219 (2016), 대한치과교정학회
- Torres MG, "Accuracy of linear measurements in cone beam computed tomography with different voxel sizes", Implant Dent, 21, pp.150~155 (2012)
