Consideration of root position in virtual tooth setup for extraction treatment: A comparative study of simulated and actual treatment results
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: The purpose of the present study was to compare the root positions in virtual tooth setups using only crowns in a simulated treatment with those achieved in the actual treatment. Methods: Pre- and post-treatment intraoral and corresponding cone beam computed tomography (CBCT) scans were obtained from 15 patients who underwent orthodontic treatment with premolar extraction. A conventional virtual tooth setup was used for the treatment simulation. Pre- and post-treatment three-dimensional digital tooth models were fabricated by integrating the patients’ intraoral and CBCT scans. The simulated root positions in the virtual setup were obtained by merging the crown in the virtual setup and root in the pre-treatment tooth model. The root positions of the simulated and actual post-treatment tooth models were compared. Results: Differences in root positions between the simulated and actual models were > 1 mm in all teeth, and statistically significant differences were observed (p < 0.05), except for the maxillary lateral incisors. The differences in the inter-root angulation were > 1° in all teeth, and statistically significant differences were observed in the maxillary and mandibular canines. Conclusions: The virtual tooth setup using only crown data showed errors over the clinical limits. The clinical application of a virtual setup using crowns and roots is necessary for accurate and precise treatment simulation, particularly in extraction treatment.
Abstract
Objective: The purpose of the present study was to compare the root positions in virtual tooth setups using only crowns in a simulated treatment with those achieved in the actual treatment. Methods: Pre- and post-treatment intraoral and corresponding cone beam computed tomography (CBCT) scans were obtained from 15 patients who underwent orthodontic treatment with premolar extraction. A conventional virtual tooth setup was used for the treatment simulation. Pre- and post-treatment three-dimensional digital tooth models were fabricated by integrating the patients’ intraoral and CBCT scans. The simulated root positions in the virtual setup were obtained by merging the crown in the virtual setup and root in the pre-treatment tooth model. The root positions of the simulated and actual post-treatment tooth models were compared. Results: Differences in root positions between the simulated and actual models were > 1 mm in all teeth, and statistically significant differences were observed (p < 0.05), except for the maxillary lateral incisors. The differences in the inter-root angulation were > 1° in all teeth, and statistically significant differences were observed in the maxillary and mandibular canines. Conclusions: The virtual tooth setup using only crown data showed errors over the clinical limits. The clinical application of a virtual setup using crowns and roots is necessary for accurate and precise treatment simulation, particularly in extraction treatment.
참고문헌 (25)
- Andrews LF, "The six keys to normal occlusion", Am J Orthod, 62, pp.296~309 (1972)
- Balut N, "Variations in bracket placement in the preadjusted orthodontic appliance", Am J Orthod Dentofacial Orthop, 102, pp.62~67 (1992)
- Miethke RR, "Third order tooth movements with straight wire appliances. Influence of vestibular tooth crown morphology in the vertical plane", J Orofac Orthop, 58, pp.186~197 (1997)
- Miethke RR, "Effect of variation in tooth morphology and bracket position on first and third order correction with preadjusted appliances", Am J Orthod Dentofacial Orthop, 116, pp.329~335 (1999)
- Germane N, "Three biologic variables modifying faciolingual tooth angulation by straight-wire appliances", Am J Orthod Dentofacial Orthop, 96, pp.312~319 (1989)
- Carlsson R, "Crown-root angles of upper central incisors", Am J Orthod, 64, pp.147~154 (1973)
- Bryant RM, "Variability in three morphologic features of the permanent maxillary central incisor", Am J Orthod, 86, pp.25~32 (1984)
- Mckee IW, "The effect of vertical and horizontal head positioning in panoramic radiography on mesiodistal tooth angulations", Angle Orthod, 71, pp.442~451 (2001)
- Garcia-Figueroa MA, "Effect of buccolingual root angulation on the mesiodistal angulation shown on panoramic radiographs", Am J Orthod Dentofacial Orthop, 134, pp.93~99 (2008)
- Owens AM, "Near-end of treatment panoramic radiograph in the assessment of mesiodistal root angulation", Angle Orthod, 78, pp.475~481 (2008)
- Lagravère MO, "Three-dimensional accuracy of measurements made with software on cone-beam computed tomography images", Am J Orthod Dentofacial Orthop, 134, pp.112~116 (2008)
- Swennen GR, "Threedimensional treatment planning of orthognathic surgery in the era of virtual imaging", J Oral Maxillofac Surg, 67, pp.2703~ (2009)
- Lee RJ, "Accuracy and reliability of the expected root position setup methodology to evaluate root position during orthodontic treatment", Am J Orthod Dentofacial Orthop, 154, pp.583~595 (2018)
- Casko JS, "Objective grading system for dental casts and panoramic radiographs. American Board of Orthodontics", Am J Orthod Dentofacial Orthop, 114, pp.589~599 (1998)
- Mah JK, "Practical applications of cone-beam computed tomography in orthodontics", J Am Dent Assoc 2010;141 Suppl, 141(Suppl 3), pp.7S~13S (2010)
- Macchi A, "Three-dimensional digital modeling and setup", Am J Orthod Dentofacial Orthop, 129, pp.605~610 (2006)
- Guo H, "A three-dimensional setup model with dental roots", J Clin Orthod, 45, pp.209~216 (2011)
- Kihara T, "Construction of orthodontic setup models on a computer", Am J Orthod Dentofacial Orthop, 141, pp.806~813 (2012)
- Lightheart KG, "Surface analysis of study models generated from OrthoCAD and conebeam computed tomography imaging", Am J Orthod Dentofacial Orthop, 141, pp.686~693 (2012)
- Lee RJ, "Monitoring of typodont root movement via crown superimposition of single cone-beam computed tomography and consecutive intraoral scans", Am J Orthod Dentofacial Orthop, 145, pp.399~409 (2014)
- Lee RJ, "Three-dimensional monitoring of root movement during orthodontic treatment", Am J Orthod Dentofacial Orthop, 147, pp.132~142 (2015)
- Grünheid T, "Clinical use of a direct chairside oral scanner: an assessment of accuracy, time, and patient acceptance", Am J Orthod Dentofacial Orthop, 146, pp.673~682 (2014)
- Cordasco G, "Low-dose protocol of the spiral CT in orthodontics : comparative evaluation of entrance skin dose with traditional X-ray techniques", Prog Orthod, 14, pp.24~ (2013)
- Lim Seung-Weon, "Construction reproducibility of a composite tooth model composed of an intraoral-scanned crown and a cone-beam computed tomography-scanned root", 대한치과교정학회지, 50(4), pp.229~237 (2020), 대한치과교정학회[DOI]
- Lee SC, "Accuracy of deep learning-based integrated tooth models by merging intraoral scans and CBCT scans for 3D evaluation of root position during orthodontic treatment", Prog Orthod, 23, pp.15~ (2022)