Evaluation of the cell viability and antimicrobial effects of orthodontic bands coated with silver or zinc oxide nanoparticles: An in vitro study
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: We aimed to evaluate the cell viability and antimicrobial effects of orthodontic bands coated with silver or zinc oxide nanoparticles (nano-Ag and nano-ZnO, respectively). Methods: In this experimental study, 30 orthodontic bands were divided into three groups (n = 10 each): control (uncoated band), Ag (silver-coated band), and ZnO (zinc oxide-coated band). The electrostatic spray-assisted vapor deposition method was used to coat orthodontic bands with nano-Ag or nano-ZnO. The biofilm inhibition test was used to assess the antimicrobial effectiveness of nano-Ag and nano-ZnO against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans. Biocompatibility tests were conducted using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay. The groups were compared using one-way analysis of variance with a post-hoc test. Results: The Ag group showed a significantly higher reduction in the number of L. acidophilus, C. albicans, and S. mutans colonies than the ZnO group (p = 0.015, 0.003, and 0.005, respectively). Compared with the control group, the Ag group showed a 2-log10 reduction in all the microorganisms' replication ability, but only S. mutants showed a 2-log10 reduction in replication ability in the ZnO group. The lowest mean cell viability was observed in the Ag group, but the difference between the groups was insignificant (p > 0.05). Conclusions: Coating orthodontic bands with nano-ZnO or nano-Ag induced antimicrobial effects against oral pathogens. Among the nanoparticles, nano-Ag showed the best antimicrobial activity and nano-ZnO showed the highest biocompatibility.
Abstract
Objective: We aimed to evaluate the cell viability and antimicrobial effects of orthodontic bands coated with silver or zinc oxide nanoparticles (nano-Ag and nano-ZnO, respectively). Methods: In this experimental study, 30 orthodontic bands were divided into three groups (n = 10 each): control (uncoated band), Ag (silver-coated band), and ZnO (zinc oxide-coated band). The electrostatic spray-assisted vapor deposition method was used to coat orthodontic bands with nano-Ag or nano-ZnO. The biofilm inhibition test was used to assess the antimicrobial effectiveness of nano-Ag and nano-ZnO against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans. Biocompatibility tests were conducted using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay. The groups were compared using one-way analysis of variance with a post-hoc test. Results: The Ag group showed a significantly higher reduction in the number of L. acidophilus, C. albicans, and S. mutans colonies than the ZnO group (p = 0.015, 0.003, and 0.005, respectively). Compared with the control group, the Ag group showed a 2-log10 reduction in all the microorganisms' replication ability, but only S. mutants showed a 2-log10 reduction in replication ability in the ZnO group. The lowest mean cell viability was observed in the Ag group, but the difference between the groups was insignificant (p > 0.05). Conclusions: Coating orthodontic bands with nano-ZnO or nano-Ag induced antimicrobial effects against oral pathogens. Among the nanoparticles, nano-Ag showed the best antimicrobial activity and nano-ZnO showed the highest biocompatibility.
참고문헌 (41)
- Antonio-Zancajo L, "Pain and oralhealth-related quality of life in orthodontic patients during initial therapy with conventional, low-friction, and lingual brackets and aligners(Invisalign) : a prospective clinical study", J Clin Med, 9, pp.2088~ (2020)
- Erbe C, "Quantity and distribution of plaque in orthodontic patients treated with molar bands", J Orofac Orthop, 72, pp.13~20 (2011)
- Anhoury P, "Microbial profile on metallic and ceramic bracket materials", Angle Orthod, 72, pp.338~343 (2002)
- Manuelli M, "Oral mucosal complications in orthodontic treatment", Minerva Stomatol, 68, pp.84~88 (2019)
- Bishara SE, "White spot lesions: formation, prevention, and treatment", Semin Orthod, 14, pp.174~182 (2008)
- Walsh LJ, "Prevention and caries risk management in teenage and orthodontic patients", Aust Dent J, 1, pp.S37~45 (2019)
- Lacerda Rangel Esper MÂ, "Photodynamic inactivation of planktonic cultures and Streptococcus mutans biofilms for prevention of white spot lesions during orthodontic treatment:an in vitro investigation", Am J Orthod Dentofacial Orthop, 155, pp.458~ (2019)
- Beyth N, "Surface antimicrobial activity and biocompatibility of incorporated polyethylenimine nanoparticles", Biomaterials, 29, pp.4157~4163 (2008)
- Lim BS, "Quantitative analysis of adhesion of cariogenic streptococci to orthodontic raw materials", Am J Orthod Dentofacial Orthop, 133, pp.882~888 (2008)
- Shah AG, "In vitro assessment of photocatalytic titanium oxide surface modified stainless steel orthodontic brackets for antiadherent and antibacterial properties against Lactobacillus acidophilus", Angle Orthod, 81, pp.1028~1035 (2011)
- De Stefani A, "Application of nanotechnology in orthodontic materials : a state-of-the-art review", Dent J(Basel), 8, pp.126~ (2020)
- Doudi M, "The effect of silver nanoparticles on gram-negative bacilli resistant to extended-spectrum β-lactamase enzymes", Med Lab J, 5, pp.44~51 (2011)
- Lloyd JR, "Microbial reduction of metals and radionuclides", FEMS Microbiol Rev, 27, pp.411~425 (2003)
- Bürgers R, "The anti-adherence activity and bactericidal effect of microparticulate silver additives in composite resin materials", Arch Oral Biol, 54, pp.595~601 (2009)
- Spacciapoli P, "Antimicrobial activity of silver nitrate against periodontal pathogens", J Periodontal Res, 36, pp.108~113 (2001)
- Ohira T, "Antibacterial activity of ZnO powder with crystallographic orientation", J Mater Sci Mater Med, 19, pp.1407~1412 (2008)
- Afonso Camargo SE, "Anti-bacterial properties and biocompatibility of novel SiC coating for dental ceramic", J Funct Biomater, 11, pp.33~ (2020)
- Miles AA, "The estimation of the bactericidal power of the blood", J Hyg(Lond), 38, pp.732~749 (1938)
- ISO 10993-5:2009. Biological evaluation of medical devices- part 5: tests for in vitro cytotoxicity, "International Organization for Standardization", ISO, ~ (2009)
- Tavassoli-Hojjati S, "Evaluation of the effect of fluoride gel and varnish on the demineralization resistance of enamel : an in vitro", J Iran Dent Assoc, 24, pp.28~34 (2012)
- Farhadian N, "Streptococcus mutans counts in patients wearing removable retainers with silver nanoparticles vs those wearing conventional retainers: a randomized clinical trial", Am J Orthod Dentofacial Orthop, 151, pp.11~ (2017)
- Arash V, "Evaluation of antibacterial effects of silver-coated stainless steel orthodontic brackets", J Dent(Tehran), 13, pp.49~54 (2016)
- Ghorbanzadeh R, "Effects of baseplates of orthodontic appliances with in situ generated silver nanoparticles on cariogenic bacteria:a randomized, double-blind cross-over clinical trial", J Contemp Dent Pract, 16, pp.291~298 (2015)
- Poosti M, "Shear bond strength and antibacterial effects of orthodontic composite containing TiO2 nanoparticles", Eur J Orthod, 35, pp.676~679 (2013)
- Jedrychowski JR, "Antibacterial and mechanical properties of restorative materials combined with chlorhexidines", J Oral Rehabil, 10, pp.373~381 (1983)
- Bulut H, "Evaluation of the shear bond strength of 3 curing bracket bonding systems combined with an antibacterial adhesive", Am J Orthod Dentofacial Orthop, 132, pp.77~83 (2007)
- Kachoei M, "A novel developed bioactive composite resin containing silver", zinc oxide (Ag, Evid Based Complement Alternat Med, pp.2021, 2021[DOI]
- Garmasheva I, "Lactobacillus species mediated synthesis of silver nanoparticles and their antibacterial activity against opportunistic pathogens in vitro", Bioimpacts, 6, pp.219~223 (2016)
- Sharma VK, "Silver nanoparticles : green synthesis and their antimicrobial activities", Adv Colloid Interface Sci, 145, pp.83~96 (2009)
- Chen X, "Nanosilver : a nanoproduct in medical application", Toxicol Lett, 176, pp.1~12 (2008)
- Hernández-Sierra JF, "The antimicrobial sensitivity of Streptococcus mutans to nanoparticles of silver, zinc oxide, and gold", Nanomedicine, 4, pp.237~240 (2008)
- Cieplik F, "Development of standard protocols for biofilm-biomaterial interface testing", JADA Found Sci, 1, pp.100008~ (2022)
- Shahin Kasraei, "Antibacterial properties of composite resins incorporating silver and zinc oxide nanoparticles on Streptococcus mutans and Lactobacillus", Restorative Dentistry and Endodontics, 39(2), pp.109~114 (2014), 대한치과보존학회[DOI]
- Hailan SY, "Antimicrobial efficacy of silver, zinc oxide, and titanium dioxide nanoparticles incorporated in orthodontic bonding agent", J Baghdad Coll Dent, 31, pp.10~16 (2019)
- Ahrari F, "The antimicrobial sensitivity of Streptococcus mutans and Streptococcus sangius to colloidal solutions of different nanoparticles applied as mouthwashes", Dent Res J(Isfahan), 12, pp.44~49 (2015)
- Prabha RD, "Antibacterial nanosilver coated orthodontic bands with potential implications in dentistry", Indian J Med Res, 144, pp.580~586 (2016)
- Halimi SU, "Electrospray deposition of titanium dioxide(TiO2)nanoparticles", AIP Conf Proc, 1586, pp.57~ (2014)
- Bondarenko O, "Toxicity of Ag, CuO and ZnO nanoparticles to selected environmentally relevant test organisms and mammalian cells in vitro: a critical review", Arch Toxicol, 87, pp.1181~1200 (2013)
- Kim S, "Oxidative stress-dependent toxicity of silver nanoparticles in human hepatoma cells", Toxicol In Vitro, 23, pp.1076~1084 (2009)
- Lesniak A, "Nanoparticle adhesion to the cell membrane and its effect on nanoparticle uptake efficiency", J Am Chem Soc, 135, pp.1438~1444 (2013)
- Shahi S, "A review on potential toxicity of dental material and screening their biocompatibility", Toxicol Mech Methods, 29, pp.368~377 (2019)
