Validation of three-dimensional digital model superimpositions based on palatal structures in patients with maximum anterior tooth retraction following premolar extraction
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective: This study aimed to evaluate the superimposition accuracy of digital modes for measuring tooth movement in patients requiring anterior retraction after premolar extraction based on the proposed reference regions. Methods: Forty patients treated with bilateral maxillary first premolar extraction were divided into two groups: moderate retraction (< 7.0 mm) and maximum retraction (≥ 7.0 mm). Central incisor displacement was measured using cephalometric superimpositions and three-dimensional (3D) digital superimpositions with the 3rd or 4th ruga as the reference point. The Wilcoxon signed-rank test and linear regression analyses were performed to test the significance of the differences and relationships between the two measurement techniques. Results: In the moderate retraction group, the central incisor anteroposterior displacement values did not differ significantly between 3D digital and cephalometric superimpositions. However, in the maximum-retraction group, significant differences were observed between the anteroposterior displacement evaluated by the 3rd ruga superimposition and cephalometric methods (p < 0.05). Conclusions: This study demonstrated that 3D digital superimpositions were clinically as reliable as cephalometric superimpositions in assessing tooth movements in patients requiring moderate retraction. However, the reference point should be carefully examined in patients who require maximum retraction.
Abstract
Objective: This study aimed to evaluate the superimposition accuracy of digital modes for measuring tooth movement in patients requiring anterior retraction after premolar extraction based on the proposed reference regions. Methods: Forty patients treated with bilateral maxillary first premolar extraction were divided into two groups: moderate retraction (< 7.0 mm) and maximum retraction (≥ 7.0 mm). Central incisor displacement was measured using cephalometric superimpositions and three-dimensional (3D) digital superimpositions with the 3rd or 4th ruga as the reference point. The Wilcoxon signed-rank test and linear regression analyses were performed to test the significance of the differences and relationships between the two measurement techniques. Results: In the moderate retraction group, the central incisor anteroposterior displacement values did not differ significantly between 3D digital and cephalometric superimpositions. However, in the maximum-retraction group, significant differences were observed between the anteroposterior displacement evaluated by the 3rd ruga superimposition and cephalometric methods (p < 0.05). Conclusions: This study demonstrated that 3D digital superimpositions were clinically as reliable as cephalometric superimpositions in assessing tooth movements in patients requiring moderate retraction. However, the reference point should be carefully examined in patients who require maximum retraction.
참고문헌 (30)
- Horton HM, "Technique comparison for efficient orthodontic tooth measurements using digital models", Angle Orthod, 80, pp.254~261 (2010)
- Keating AP, "A comparison of plaster, digital and reconstructed study model accuracy", J Orthod, 35, pp.191~201 (2008)
- Mullen SR, "Accuracy of space analysis with emodels and plaster models", Am J Orthod Dentofacial Orthop, 132, pp.346~352 (2007)
- Garino F, "Digital treatment objectives : procedure and clinical application", Prog Orthod, 5, pp.248~258 (2004)
- Fillion D, "Avantages cliniques de la technique linguale Orapix-arc droit", Int Orthod, 8, pp.125~151 (2010)
- Ganzer N, "A novel method for superimposition and measurements on maxillary digital 3D models-studies on validity and reliability", Eur J Orthod, 40, pp.45~51 (2018)
- Becker K, "Skeletally anchored mesialization of molars using digitized casts and two surface-matching approaches : analysis of treatment effects", J Orofac Orthop, 79, pp.11~18 (2018)
- 최진일, "Validity of palatal superimposition of 3-dimensional digital models in cases treated with rapid maxillary expansion and maxillary protraction headgear", 대한치과교정학회지, 42(5), pp.235~241 (2012), 대한치과교정학회
- 윤달선, "Clinical application of an intraoral scanner for serial evaluation of orthodontic tooth movement: A preliminary study", 대한치과교정학회지, 48(4), pp.262~267 (2018), 대한치과교정학회
- An K, "Identification of a stable reference area for superimposing mandibular digital models", J Orofac Orthop, 76, pp.508~519 (2015)
- Stucki S, "Assessment of techniques used for superimposition of maxillary and mandibular 3D surface models to evaluate tooth movement : a systematic review", Eur J Orthod, 42, pp.559~570 (2020)
- Chen G, "Stable region for maxillary dental cast superimposition in adults, studied with the aid of stable miniscrews", Orthod Craniofac Res, 14, pp.70~79 (2011)
- Garib D, "Superimposition of maxillary digital models using the palatal rugae : does ageing affect the reliability?", Orthod Craniofac Res, 22, pp.183~193 (2019)
- Chong JA, "Morphological patterns of the palatal rugae : a review", J Oral Biosci, 62, pp.249~259 (2020)
- Choi SH, "Analysis of the morphological characteristics of the palatal rugae for three-dimensional superimposition of digital models in Korean subjects", Biomed Res Int, 2018, pp.3936918~ (2018)
- Fleming PS, "Orthodontic measurements on digital study models compared with plaster models : a systematic review", Orthod Craniofac Res, 14, pp.1~16 (2011)
- Pauls AH, "Therapeutic accuracy of individualized brackets in lingual orthodontics", J Orofac Orthop, 71, pp.348~361 (2010)
- Vasilakos G, "Assessment of different techniques for 3D superimposition of serial digital maxillary dental casts on palatal structures", Sci Rep, 7, pp.5838~ (2017)
- Ricketts RM, "A four-step method to distinguish orthodontic changes from natural growth", J Clin Orthod, 9, pp.208~215 (1975)
- Dohke M, "Bilateral differences in the regressive evolution of the palatal rugae", Jpn J Oral Biol, 36, pp.126~140 (1994)
- Jang I, "A novel method for the assessment of three-dimensional tooth movement during orthodontic treatment", Angle Orthod, 79, pp.447~453 (2009)
- Pazera C, "Palatal rugae positional changes during orthodontic treatment of growing patients", Orthod Craniofac Res, 24, pp.351~359 (2021)
- Hoggan BR, "The use of palatal rugae for the assessment of anteroposterior tooth movements", Am J Orthod Dentofacial Orthop, 119, pp.482~488 (2001)
- van der Linden FP, "Changes in the position of posterior teeth in relation to ruga points", Am J Orthod, 74, pp.142~161 (1978)
- Peavy DC Jr, "The effects of tooth movement on the palatine rugae", J Prosthet Dent, 18, pp.536~542 (1967)
- Cha BK, "Analysis of tooth movement in extraction cases using three-dimensional reverse engineering technology", Eur J Orthod, 29, pp.325~331 (2007)
- Thiruvenkatachari B, "Measuring 3-dimensional tooth movement with a 3-dimensional surface laser scanner", Am J Orthod Dentofacial Orthop, 135, pp.480~485 (2009)
- Abdi AH, "Registration of serial maxillary models via the weighted rugae superimposition method", Orthod Craniofac Res, 20, pp.79~84 (2017)
- Simmons JD, "A longitudinal study of anteroposterior growth changes in the palatine rugae", J Dent Res, 66, pp.1512~1515 (1987)
- Ashmore JL, "A 3-dimensional analysis of molar movement during headgear treatment", Am J Orthod Dentofacial Orthop, 121, pp.18~29 (2002)