3D프린팅 기술을 이용한 고관절 전치환술용 리머 개발
Development of Reamer for Total Hip Arthroplasty using 3D Printing Technology
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Acetabular reamers used in total hip arthroplasty serve to remove the damaged acetabular. The processing performance of the reamer needs to be improved so that the artificial joint can be properly mounted on the surgical site. In this study, reaming simulations and experiments were conducted to improve the machining performance of the reamer. It is possible to shorten the prototype production period through the precision casting method by applying the 3D printing technique. As a result, various prototypes could be produced in a short period according to the size change of the reamer, significantly contributing to the improvement of the processing performance of the reamer.
Abstract
Acetabular reamers used in total hip arthroplasty serve to remove the damaged acetabular. The processing performance of the reamer needs to be improved so that the artificial joint can be properly mounted on the surgical site. In this study, reaming simulations and experiments were conducted to improve the machining performance of the reamer. It is possible to shorten the prototype production period through the precision casting method by applying the 3D printing technique. As a result, various prototypes could be produced in a short period according to the size change of the reamer, significantly contributing to the improvement of the processing performance of the reamer.
참고문헌 (10)
- Archibeck, M. J., "Learning curve for the two-incision total hip replacement", Clinical Orthopaedics and Related Research, 429, pp.232~238 (2004)
- Berger, R. A., "Total hip arthroplasty using the minimally invasive two-incision approach", Clinical Orthopaedics and Related Research, 417, pp.232~241 (2003)
- Berger, R. A., "Rapid rehabilitation and recovery with minimally invasive total hip arthroplasty", Clinical Orthopaedics and Related Research, 429, pp.239~247 (2004)
- Duwelius, P. J., "Minimally invasive total hip arthroplasty: the two-incision approach", Current Opinion in Orthopaedics, 16(1), pp.5~9 (2005)
- Keggi, K. J., "Minimal incision total hip arthroplasty via the anterior approach", Current Opinion in Orthopaedics, 16(1), pp.10~13 (2005)
- Sherry, E., "Minimally invasive techniques for total hip arthroplasty", JBJS, 84(8), pp.1481~1482 (2002)
- Waldman, B. J., "Minimally invasive total hip replacement and perioperative management: early experience", Journal of the Southern Orthopaedic Association, 11(4), pp.213~217 (2002)
- Choi, B. -J., "Development and Technology of Lost-Wax Investment Casting Process", Korea Foundry Society, 31(5), pp.249~254 (2011)
- 황성주, "인베스트먼트법을 이용한 선박용 대형 터보차져 노즐링 개발을 위한 연구", 한국정밀공학회지, 31(8), pp.671~675 (2014), 한국정밀공학회[DOI]
- Slotkin, S., "Hemispherical and minimally invasive total hip reamers: a biomechanical analysis of use and design", Arthroplast Today, 3(2), pp.131~136 (2017)