Al-Zn-Zr 용사코팅층의 고체입자 충돌 침식특성에 미치는 봉공처리의 영향
Effect of Sealing Treatment on Solid Particle Impingement Erosion of Al-Zn-Zr Thermal Spray Coating Layer
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Several technologies are employed to protect substrates from corrosion and erosion damage. In particular, arc thermal spray coating technology is widely used as anti-corrosive technology for steel and concrete structures and is applied to offshore plants and petrochemical and drilling facilities. In this investigation, solid particle impingement erosion experiments were performed on an arc thermal spraying-coated specimen using 85% Al–14% Zn–1% Zr wire rod in KR-RA steel. This study investigated the effect of fluorosilicone sealing on the erosion resistance characteristics of the thermal spray coating layer. The erosion rates of the thermal spray-coated and sealed specimens were 4.1×10-4 and 8.5×10-4, respectively. At the beginning of the experiment, the fluorosilicone sealant was almost destroyed by the impact of the solid particles. The destruction time for the coating layer was 10 minutes for the thermal spray-coated specimen and 13 minutes for the sealed specimens, indicating that the sealed specimens had better erosion resistance characteristics to solid particle impingement.
Abstract
Several technologies are employed to protect substrates from corrosion and erosion damage. In particular, arc thermal spray coating technology is widely used as anti-corrosive technology for steel and concrete structures and is applied to offshore plants and petrochemical and drilling facilities. In this investigation, solid particle impingement erosion experiments were performed on an arc thermal spraying-coated specimen using 85% Al–14% Zn–1% Zr wire rod in KR-RA steel. This study investigated the effect of fluorosilicone sealing on the erosion resistance characteristics of the thermal spray coating layer. The erosion rates of the thermal spray-coated and sealed specimens were 4.1×10-4 and 8.5×10-4, respectively. At the beginning of the experiment, the fluorosilicone sealant was almost destroyed by the impact of the solid particles. The destruction time for the coating layer was 10 minutes for the thermal spray-coated specimen and 13 minutes for the sealed specimens, indicating that the sealed specimens had better erosion resistance characteristics to solid particle impingement.
참고문헌 (14)
- E. Santana-Diaz, "Predicting the coating condition on ships using ICCP system data", International Journal for Numerical Methods in Engineering, 62(6), pp.727~746 (2005), Wiley[DOI]
- Young T. Shen, "Effects of Ship Hull and Propeller on Rudder Cavitation", Journal of Ship Research, 41(03), pp.172~180 (1997), The Society of Naval Architects and Marine Engineers[DOI]
- Esmaeil Sadeghi, "Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants. Part I: Effect of Composition and Microstructure", Journal of Thermal Spray Technology, 28(8), pp.1749~1788 (2019), Springer Science and Business Media LLC[DOI]
- 한민수, "알루미늄 용사코팅의 불소실리콘 봉공재 적용에 따른 전기화학적 및 캐비테이션 특성 평가", CORROSION SCIENCE AND TECHNOLOGY, 9(6), pp.317~324 (2010), 한국부식방식학회
- S. Kuroda, "An 18-Year Exposure Test of Thermal-Sprayed Zn, Al, and Zn-Al Coatings in Marine Environment", CORROSION, 62(7), pp.635~647 (2006), NACE International[DOI]
- 박일초, "아크 용사법을 이용한 Inconel 625 코팅 층의 해수 내 캐비테이션 손상 거동", 한국표면공학회지, 48(6), pp.349~353 (2015), 한국표면공학회[DOI]
- 박일초, "용융 알루미늄 도금된 절탄기 강재 튜브의 고상입자 침식 특성", CORROSION SCIENCE AND TECHNOLOGY, 20(6), pp.384~390 (2021), 한국부식방식학회[DOI]
- B. M. Kim, "Principles and applications of thermal spraying techniques", The Korean Welding and Joining Society, 20, pp.443~ (2002)
- S. Tortuero, "Evaluating the erosion resistance of Ti6Al4V coatings deposited by cold spray", Wear, 454-455, pp.203337~ (2020), Elsevier BV[DOI]
- 김경훈, "고체입자 충돌침식으로 인한 배관 재질의 손상에 관한 연구", CORROSION SCIENCE AND TECHNOLOGY, 13(4), pp.130~138 (2014), 한국부식방식학회[DOI]
- Bob Flitney, "Extending the application of fluorosilicone elastomers", Sealing Technology, 2005(2), pp.6~11 (2005), Mark Allen Group[DOI]
- Xiaoyong Ren, "Abrasive wear behavior of TiCN cermets under water-based slurries with different abrasives", Tribology International, 66, pp.35~43 (2013), Elsevier BV[DOI]
- A. K. Gupta, "Aluminium alloy-silica sand composites: preparation and properties", Journal of Materials Science, 21(10), pp.3413~3419 (1986), Springer Science and Business Media LLC[DOI]
- D. Aquaro, "Erosion of ductile and brittle materials", Meccanica, 36(6), pp.651~661 (2001), Springer Science and Business Media LLC[DOI]