용사 도막의 내식성에 관한 전기화학적 평가
An Electrochemical Evaluation on the Corrosion Property of Metallizing Film
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Many surface protection methods have been developed to apply for constructional steels used under severe corrosive environment. Thermal spray coating has been known to be an attractive technique due to its relatively high coating speed. Furthermore high corrosion resistance of coated film with thermal spray is required to expand its application. Four types of coated films(DFT:300 um) such as pure zinc, pure aluminum and two Al-Zn alloy (Al:Zn=85:15 and Al:Zn=95:5) onto the carbon steel (SS401) were prepared with arc spray, and the corrosion behavior of their samples were evaluated by electrochemical method in this study. Pure aluminum sample showed high corrosion resistance behavior exposed to sea water solution and pure zinc and alloy (Al:Zn=95:5) samples followed pure aluminum sample. The other alloy(Al:Zn=85:15) so called galvalume coated onto the carbon steel ranks the 4th corrosion resistance in this study. The results of porosity ratio of those samples by observation are well matched with the electrochemical data.
Abstract
Many surface protection methods have been developed to apply for constructional steels used under severe corrosive environment. Thermal spray coating has been known to be an attractive technique due to its relatively high coating speed. Furthermore high corrosion resistance of coated film with thermal spray is required to expand its application. Four types of coated films(DFT:300 um) such as pure zinc, pure aluminum and two Al-Zn alloy (Al:Zn=85:15 and Al:Zn=95:5) onto the carbon steel (SS401) were prepared with arc spray, and the corrosion behavior of their samples were evaluated by electrochemical method in this study. Pure aluminum sample showed high corrosion resistance behavior exposed to sea water solution and pure zinc and alloy (Al:Zn=95:5) samples followed pure aluminum sample. The other alloy(Al:Zn=85:15) so called galvalume coated onto the carbon steel ranks the 4th corrosion resistance in this study. The results of porosity ratio of those samples by observation are well matched with the electrochemical data.
참고문헌 (16)
- J. P. hirvonen, , Preceeding of the 1993 National Thermal Spray Conference, pp.475~ (1993)
- D. A. Jones, "PRINCIPLES AND PREVENTION OF CORROSION", pp.398~ (1991), Maxwell Macmillian International Publishing Group
- "The Techonlogy Center of the Coastal Development, Corrosion Control Manual of Harbor Steel Structure", ~ (1987)
- W. Von Baeckmann, "Handbook of CATHODIC CORROSION PROTECTION", pp.180~ (1997), Guef publishing Company
- M. G. Fontana, "Corrosion Engineering", pp.39~ (1978), McGraw-Hill, Inc.
- R. F. Bunshah, "Deposition technologies for films and coatings", pp.234~ (1982), Noyes Pub., Ch.
- 문경만, "인히비터 첨가용액의 침지에 의한 용융아연도금 강판의 내식성 개선에 관한 전기화학적 연구", 한국마린엔지니어링학회지, 31(2), pp.173~181 (2007), 한국마린엔지니어링학회
- H. S, Ingham, "Flame Spray Handbook vol. III" (1985), Metco Inc.
- M. H. Regina, , Surface and Coating Tec., 202, pp.172~ (2007)
- J. Wilden, , Surface and Coating Tec., 201, pp.1962~ (2006)
- B. Gerard, , Surface and Coationg Tech., 201, pp.2028~ (2006)
- W. B. Choi, , J. of Acta Materialia, 55, pp.857~ (2007)
- R. S.C. Pendes, , Surface and Coating Tec., 200, pp.3049~ (2006)
- k. M. Moon, , J. Mar. Eng. Soc., 34, pp.670~ (2010)
- J. V. Muylder, "Atlas of Electrochemical Equilibria in Aqueous Solution, Rergomon press and cebelcor", ~ (1966)
- Guo Taixiong, "Study on Flaking Resistance of Hot-dip Galvanizing Coating", CORROSION SCIENCE AND TECHNOLOGY, 9(4), pp.143~146 (2010), 한국부식방식학회