Effects of Corrosion Inhibitor on Corrosion of Al-based Alloys in Ethylene Glycol-Water Coolant Environment
4
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The objective of this study was to investigate the effectiveness of sodium dodecyl benzene sulfonate (SDBS) as a corrosion inhibitor on the pitting corrosion behavior of aluminum alloys used in electric vehicle battery cooling systems within a mixture of ethylene glycol and water (EG-W) coolant. Potentiodynamic polarization testing revealed unstable passive film formation on the aluminum alloys in the absence of SDBS. However, the addition of SDBS resulted in a robust passive film, enhancing the pitting corrosion resistance across all examined alloys. Pitting corrosion was predominantly observed near intermetallic compounds in the presence of Cl? ions, which was attributed to galvanic interactions. Among tested alloys, A1040 demonstrated superior resistance due to its lower areal fraction of precipitates and donor density. The incorporation of SDBS inhibitors mitigated the overall pitting corrosion process by hindering Cl? ion penetration. These findings suggest that SDBS can significantly improve pitting corrosion resistance in aluminum alloys employed in battery coolant environments.
Abstract
The objective of this study was to investigate the effectiveness of sodium dodecyl benzene sulfonate (SDBS) as a corrosion inhibitor on the pitting corrosion behavior of aluminum alloys used in electric vehicle battery cooling systems within a mixture of ethylene glycol and water (EG-W) coolant. Potentiodynamic polarization testing revealed unstable passive film formation on the aluminum alloys in the absence of SDBS. However, the addition of SDBS resulted in a robust passive film, enhancing the pitting corrosion resistance across all examined alloys. Pitting corrosion was predominantly observed near intermetallic compounds in the presence of Cl? ions, which was attributed to galvanic interactions. Among tested alloys, A1040 demonstrated superior resistance due to its lower areal fraction of precipitates and donor density. The incorporation of SDBS inhibitors mitigated the overall pitting corrosion process by hindering Cl? ion penetration. These findings suggest that SDBS can significantly improve pitting corrosion resistance in aluminum alloys employed in battery coolant environments.
참고문헌 (17)
- Haitao Wang, "Cooling capacity of a novel modular liquid-cooled battery thermal management system for cylindrical lithium ion batteries", Applied Thermal Engineering, 178, pp.115591~ (2020), Elsevier BV[DOI]
- Zhen-Zhe Li, "Optimal Design for Cooling System of Batteries Using DOE and RSM", International Journal of Precision Engineering and Manufacturing, 13(9), pp.1641~1645 (2012), 한국정밀공학회
- Lijun Zhao, "Experimental Investigation of a Lithium Battery Cooling System", Sustainability, 11(18), pp.5020~ (2019), MDPI AG[DOI]
- Max Feinauer, "Simulation, Set-Up, and Thermal Characterization of a Water-Cooled Li-Ion Battery System", Batteries, 8(10), pp.177~ (2022), MDPI AG[DOI]
- Kai Chen, "Construction of effective symmetrical air-cooled system for battery thermal management", Applied Thermal Engineering, 166, pp.114679~ (2020), Elsevier BV[DOI]
- Xingxing Wang, "A Review of the Power Battery Thermal Management System with Different Cooling, Heating and Coupling System", Energies, 15(6), pp.1963~ (2022), MDPI AG[DOI]
- Mohsen Akbarzadeh, "A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery module", Applied Thermal Engineering, 198, pp.117503~ (2021), Elsevier BV[DOI]
- Chuanwei Zhang, "A Coolant Circulation Cooling System Combining Aluminum Plates and Copper Rods for Li-Ion Battery Pack", Energies, 13(17), pp.4296~ (2020), MDPI AG[DOI]
- Zhonghao Rao, "Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface", Applied Thermal Engineering, 123, pp.1514~1522 (2017), Elsevier BV[DOI]
- 신동호, "전기자동차 배터리 하우징용 6061-T6 알루미늄합금의 전식 특성에 미치는 염화물농도 및 인가전류밀도의 영향", CORROSION SCIENCE AND TECHNOLOGY, 21(5), pp.348~359 (2022), 한국부식방식학회[DOI]
- 신동호, "산성비 환경을 모사한 수용액에서 염화물 농도에 따른 전기자동차 배터리 하우징용 재료의 전기화학적 특성 연구", CORROSION SCIENCE AND TECHNOLOGY, 21(2), pp.147~157 (2022), 한국부식방식학회[DOI]
- Y. Liu, "Inhibition of Corrosion of 3003 Aluminum Alloy in Ethylene Glycol-Water Solutions", Journal of Materials Engineering and Performance, 20(2), pp.271~275 (2010), Springer Science and Business Media LLC[DOI]
- M. Asadikiya, "Effect of Inhibitors on the Corrosion of Automotive Aluminum Alloy in Ethylene Glycol-Water Mixture", CORROSION, 67(12), pp.126001~1 (2011), Association for Materials Protection and Performance (AMPP)[DOI]
- Y. Liu, "Inhibiting effect of cerium ions on corrosion of 3003 aluminum alloy in ethylene glycol–water solutions", Journal of Applied Electrochemistry, 41(4), pp.383~388 (2010), Springer Science and Business Media LLC[DOI]
- Y. Liu, "Characterization of passivity and pitting corrosion of 3003 aluminum alloy in ethylene glycol–water solutions", Journal of Applied Electrochemistry, 41(2), pp.151~159 (2010), Springer Science and Business Media LLC[DOI]
- Jun-Yi Sha, "Corrosion inhibition behaviour of sodium dodecyl benzene sulphonate for brass in an Al2O3 nanofluid and simulated cooling water", Corrosion Science, 148, pp.123~133 (2019), Elsevier BV[DOI]
- Binghao Shu, "Effect of Different Corrosion Inhibitors on Corrosion of AM60B Magnesium Alloy in Simulated Vehicle Coolant", International Journal of Electrochemical Science, 17(6), pp.220621~ (2022), Elsevier BV[DOI]