Galvanic Corrosion Between Component Parts of Aluminum Alloys for Heat Exchanger of Automobile
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
There are a variety of heat exchangers used in automobiles, such as shell and tube heat exchangers, double tube heat exchangers, and plate heat exchangers. Most of them are water-cooled to prevent engine overheating. There have been reports of corrosion damage to these heat exchangers due to continuous wetting caused by external temperature differences, road pollutants, and snow removal. In addition, galvanic corrosion, which occurs when two dissimilar materials come into contact, has been identified as a major cause. In this study, corrosion characteristics and galvanic corrosion behavior of Al alloy (AA3003, AA4045 and AA7072) used in automobile heat exchangers were analyzed. Effective clad materials for heat exchanger tubes and fins were also evaluated. It was found that AA7072 should be applied as the cladding material for fin AA3003 and that AA4045 was suitable as a cladding material for tube AA3003 because this clad materials application was the most effective clad design to delay the occurrence of pinhole in the tube. Main factors influencing galvanic corrosion dissolution were found to be galvanic corrosion potential difference and galvanic corrosion current density.
Abstract
There are a variety of heat exchangers used in automobiles, such as shell and tube heat exchangers, double tube heat exchangers, and plate heat exchangers. Most of them are water-cooled to prevent engine overheating. There have been reports of corrosion damage to these heat exchangers due to continuous wetting caused by external temperature differences, road pollutants, and snow removal. In addition, galvanic corrosion, which occurs when two dissimilar materials come into contact, has been identified as a major cause. In this study, corrosion characteristics and galvanic corrosion behavior of Al alloy (AA3003, AA4045 and AA7072) used in automobile heat exchangers were analyzed. Effective clad materials for heat exchanger tubes and fins were also evaluated. It was found that AA7072 should be applied as the cladding material for fin AA3003 and that AA4045 was suitable as a cladding material for tube AA3003 because this clad materials application was the most effective clad design to delay the occurrence of pinhole in the tube. Main factors influencing galvanic corrosion dissolution were found to be galvanic corrosion potential difference and galvanic corrosion current density.
참고문헌 (23)
- 김종민, "열교환기 관사이의 거리변화에 대한 열효율 특성", 에너지공학, 19(3), pp.177~181 (2010), 한국에너지학회
- W.S Miller, "Recent development in aluminium alloys for the automotive industry", Materials Science and Engineering: A, 280(1), pp.37~49 (2000), Elsevier BV[DOI]
- Pranav Dev Srivyas, "Application of Hybrid Aluminum Matrix Composite in Automotive Industry", Materials Today: Proceedings, 18, pp.3189~3200 (2019), Elsevier BV[DOI]
- M. Asadikiya, "Effect of Inhibitors on the Corrosion of Automotive Aluminum Alloy in Ethylene Glycol-Water Mixture", CORROSION, 67(12), pp.126001~1 (2011), Association for Materials Protection and Performance (AMPP)[DOI]
- Y. Liu, "Effects of coolant chemistry on corrosion of 3003 aluminum alloy in automotive cooling system", Materials and Corrosion, 61(7), pp.574~579 (2010), Wiley[DOI]
- 강창원, "자동차용 라디에이터 열유동 특성에 관한 수치해석", 한국기계가공학회지, 18(6), pp.55~61 (2019), 한국기계가공학회[DOI]
- S. B. Kwak, , Ph.D., pp.2011
- Arief Syarifuddin Fitrianto, "Effect Of Titanium On Corrosion Behavior Of Aluminum Alloy 3104 As a Candidate Material For Radiator Combustion Engines", FLYWHEEL : Jurnal Teknik Mesin Untirta, pp.12~ (2021), Universitas Sultan Ageng Tirtayasa - Fakultas Teknik[DOI]
- Hafiz Muhammad Ali, "Experimental investigation of convective heat transfer augmentation for car radiator using ZnO–water nanofluids", Energy, 84, pp.317~324 (2015), Elsevier BV[DOI]
- Olusegun K. Abiola, "Effect of common water contaminants on the corrosion of aluminium alloys in ethylene glycol–water solution", Corrosion Science, 50(1), pp.242~247 (2008), Elsevier BV[DOI]
- J. Zaharieva, "Corrosion of aluminium and aluminium alloy in ethylene glycol–water mixtures", Journal of Alloys and Compounds, 470(1-2), pp.397~403 (2009), Elsevier BV[DOI]
- Glaydson L.F. Mendonça, "Understanding the corrosion inhibition of carbon steel and copper in sulphuric acid medium by amino acids using electrochemical techniques allied to molecular modelling methods", Corrosion Science, 115, pp.41~55 (2017), Elsevier BV[DOI]
- Bore Jegdić, "Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl<sub>3<", sub> corrosion inhibitor, 2019, pp.71(3), 352~364[DOI]
- S. Liu, "The synergistic effect of Na3 PO4and benzotriazole on the inhibition of copper corrosion in tetra-n-butylammonium bromide aerated aqueous solution", Materials and Corrosion, 63(11), pp.1017~1025 (2012), Wiley[DOI]
- Lin Niu, "Electrochemical characterization of metastable pitting of 3003 aluminum alloy in ethylene glycol–water solution", Journal of Materials Science, 42(20), pp.8613~8617 (2007), Springer Science and Business Media LLC[DOI]
- 조수연, "아연 코팅과 열처리에 따른 알루미늄 열교환기 소재의 부식", CORROSION SCIENCE AND TECHNOLOGY, 18(1), pp.24~32 (2019), 한국부식방식학회[DOI]
- 유영란, "금속재료의 전기화학적 갈바닉 부식에 미치는 GECM의 영향", CORROSION SCIENCE AND TECHNOLOGY, 8(1), pp.27~39 (2009), 한국부식방식학회
- 허승영, "Effects of NaCl Concentration and Solution Temperature on the Galvanic Corrosion between CFRP and AA7075T6", CORROSION SCIENCE AND TECHNOLOGY, 19(2), pp.75~81 (2020), 한국부식방식학회[DOI]
- J.S. Yoon, "Fabrication and brazeability of a three-layer 4343", 3003, Journal of Materials Processing Technology, pp.2001, 111(1-3)[DOI]
- J. Lacaze, "Study of the microstructure resulting from brazed aluminium materials used in heat exchangers", Materials Science and Engineering: A, 413-414, pp.317~321 (2005), Elsevier BV[DOI]
- X.X. Yao, "Strain-controlled fatigue of a braze clad Al–Mn–Mg alloy at room temperature and at 75 and 180°C", Materials Science and Engineering: A, 267(1), pp.1~6 (1999), Elsevier BV[DOI]
- D.P. Sekulic, "Dendritic growth in Al–Si alloys during brazing. Part 1: Experimental evidence and kinetics", International Journal of Heat and Mass Transfer, 48(12), pp.2372~2384 (2005), Elsevier BV[DOI]
- D. Laougli, "Evaluation of inhibitor efficiency on corrosion of the aluminum heat exchangers and radiators in central heating", Journal of Materials and Environmental Science, 3, pp.34~ (2012)