Fiber post의 Relining 방법과 시멘트 유형에 따른 Push-out Bond Strength의 비교
Comparison of Push-out Bond Strengths According to Relining Procedure and Cement Type on Fiber Post
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
근관치료된 치아의 수복에서 fiber post 크기와 포스트 공간의 직경이 일치하지 않은 경우, 포스트 공간은 두꺼운 레진 시멘트로 채워지게 된다. 레진 시멘트가 두꺼워지면 시멘트 내에 기포가 형성되어 포스트 분리가 발생되기 쉽다. 이런 문제점을 해결하기 위한 방법은 composit resin을 이용하여 fiber post를 relining하는 것이다. 이렇게 형성된 해부학적 포스트는 포스트 공간에 잘 적합하고 시멘트의 두께를 감소시킨다. 이 연구의 목적은 relining 과정과 임상 과정의 간소화를 위해 사용되고 있는 luting agents 종류에 따른 fiber post의 push-out 결합 강도를 평가하는 것이다. 42개의 발치된 치아는 6개의 그룹(n=7)으로 나누어졌다. (A1: relined fiber post를 Luxacore/all-bond 2로 합착, A2: non-relined fiber post를 Luxacore/all-bond 2로 합착. B1: relined fiber post를 Calibra/XP-bond로 합착. B2: non-relined fiber post를 Calibra/XP-bond로 합착. C1: relined fiber post를 RelyX Unicem으로 합착. C2: non-relined fiber post를 RelyX Unicem으로 합착.) Push-out 결합 강도는 relining procedure와 cement type의 상호작용에 의해 영향을 받는 것으로 나타났다. relined fiber post 그룹이 non-relined fiber post 그룹보다 더 높은 결합 강도를 가지며 fiber post relining 과정은 결합강도에 유의한 영향을 가진다.(p<0.05) Luting agent에 따라 모든 그룹에서 RelyX Unicem의 결합강도가 Luxacore/All-bond 2와 Calibra/XP bond에 의한 것보다 유의하게 더 높았다.(p<0.05)
Abstract
When restoring endodontically treated teeth is the mismatch between fiber post size and post space diameter, the resin cement layer is excessively thick in post space and voids are likely to form in it, thus predisposing to de-bonding. The method to overcome this problem is to reline the fiber post with composite resin. This individual anatomic post improves the adaptation of post to root walls and decreases the resin cement thickness. The purpose of this in vivo study was to evaluate the push-out bond strength of fiber post according to relining procedure and luting agents type used for simplicity of clinical procedure. Forty-two extracted teeth were divides into six groups.(n=7) A1: relined fiber post cemented with Luxacore/all-bons 2, A2: non-relined fiber post cemented with Luxacore/all-bond2, B1: relinind fiber post cemented with Calibra/XP-bond, B2: non-relined fiber post cemented with Calibra/XP-bond, C1: relined fiber post cemented with RelyX Unicem, C2: non-relined fiber post cemented with RelyX Unicem Push-out bond strength was affected by interaction between relining procedure and luting agent type. Relined fiber post presented higher push-out bond strength value than non-relined fiber post and statically significant differences(p<0.05) Cementation with RelyX Unicem showed significantly higher bond strength than other luting agents(p<0.05)
참고문헌 (25)
- Andre Luis Faria e silva, "Effect of Relining on fiber post retention to root canal", J Appl Oral Sci, 17(6), pp.600~604 (2009)
- Ayes D, "Micro push-out bond strengths of four fiber- reinforced composite post systems and 2 luting materials", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 105, pp.121~128 (2008)
- Carina Strano Castellan, "Mearsuring Bond Strength between fiber post and root dentin: A Comparison of different tests", J Adhes Dent, pp.1~9 (2010)
- Camillo D'Arcangelo, "The effect of resin cement film thickness on the pullout strength of a fiber reinforced post system", J Prosthet Dent, 98, pp.193~198 (2007)
- Cury AH, "Tay FR Effect of hygroscopi expansion on the push-out resistance of glass ionomer-based cements used for the luting of glass fiber post", J Endod, 32, pp.537~540 (2006)
- Dauviller BS, "Visco-elastic parameters of dental restorative materials during setting", J Dent Res, 79, pp.818~823 (2000)
- De-Deus G, "The effect of the canal-filled area on the bacterial leakage of oval-shaped canals", Int Endod J, 41, pp.183~190 (2008)
- Emre MuMCU, "Comparison of micro push-out bond strengths of two fiber posts luted using simplified adhesive approaches", Dental Materials Journal, 28(3), pp.286~296 (2010)
- Ferrari M, "qBonding to root canal: structural characteristics of the substrate", Am J Dent, 13, pp.255~260 (2000)
- Ferrari M, "Retrospetive study of clinical behavior of several types of fiber posts", Am J Dent, 13, pp.15~18 (2000)
- Gerth HU, "Chemical analysis and bonding reaction of Relyx Unicem and Bific Composite-a comparative study", Dent Mater, 22, pp.934~941 (2006)
- Gokhan Akgungor, "Influence of dentin bonding agents and polymerization modes on the bond sterength between translucent fiber posts and three dentin regions within a post space", J Prosthet Dent, 95, pp.368~378 (2006)
- Goracci C, "The adhesion between fiber posts and root canal walla: Comparision between microtensile and push-out bond strength measurements", Eur J Oral Sci, 112, pp.353~361 (2004)
- Goracci C, "the contribution of friction to the dislocation resistance of bonded fiber posts", J Endod, 32, pp.608~612 (2005)
- Goracci. C, "Laboratory assessment of the retentive potential of adhesive posts: a review", J Dent, 35, pp.827~835 (2007)
- Grandini S, "SEM evaluation of the cement layer thickness after luting two different posts", J Adhes Dent, 7, pp.235~240 (2005)
- Grandini S, "Use of anatomic post and core for reconstructiong an endodontically treated tooth: a case report", J Adhes Dent, 5(3), pp.243~247 (2003)
- Leontine A, "Benefits of a two-step cementation procedure for prefabricated fiber posts", J Adhes Dent, 12, pp.55~62 (2010)
- Mannocci F, "Confocal and scanning electron microscopic study of teeth restored with fiber post, metal post, and composite resins", J Endod, 25, pp.789~794 (1999)
- Mjör IA, "The structure of dentine in the apical lregion of human teeth", Int Endod J, 34, pp.346~353 (2001)
- Putignano A, "An in vitro study on the adhesion of quartz fiber posts to radicular dentin", J Adhes Dent, 9, pp.463~467 (2007)
- Qualtrough AJ, "A comparision of the retention of tooth-colored posts", Quintessence Int, 34, pp.199~201 (2003)
- Roberts HW, "The effect of a translucent post on resin composite depth cure", Dent Mater, 20, pp.617~622 (2004)
- Tina Rödig, "Effects of different luting agents on bond strengths of fiber-reinforced composite posts to root canal dentin", J Adhes Dent, 12, pp.197~205 (2010)
- Vanessa Cruz Macedo, "Effect of cement type, relining procedure and length of cementation on pullout bond strength of fiber posts", J Endod, pp.1~4 (2010)