Single-peak LED와 dual-peak LED의 출력 파장 차이가 복합 레진 미세 경도와 색 안정성에 미치는 영향
Effect of the difference in spectral outputs of the single and dual-peak LEDs on the microhardness and the color stability of resin composites
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: To determine the effect of the spectral output of single and dual-peak light emitting diode (LED) curing lights on the microhardness and color stability of commercial resin composites formulated with camphorquinone and alternative photoinitiators in combination. Materials and Methods: Three light-polymerized resin composites (Z100 (3M ESPE), Tetric Ceram (Ivoclar Vivadent) and Aelite LS Posterior (Bisco)) with different photoinitiator systems were used. The resin composites were packed into a Teflon mold (8 mm diameter and 2 mm thickness) on a cover glass. After packing the composites, they were light cured with single-peak and dual-peak LEDs. The Knoop microhardness (KHN) and color difference (ΔE) for 30 days were measured. The data was analyzed statistically using a student’s t-test (p < 0.05). Results: All resin composites showed improved microhardness when a third-generation dual-peak LED light was used. The color stability was also higher for all resin composites with dual-peak LEDs. However,there was a significant difference only for Aelite LS Posterior. Conclusions: The dual-peak LEDs have a beneficial effect on the microhardness and color stability of resin composites formulated with a combination of camphorquinone and alternative photoinitiators. [J Kor Acad Cons Dent 2011;36(2):108-113.]
Abstract
Objectives: To determine the effect of the spectral output of single and dual-peak light emitting diode (LED) curing lights on the microhardness and color stability of commercial resin composites formulated with camphorquinone and alternative photoinitiators in combination. Materials and Methods: Three light-polymerized resin composites (Z100 (3M ESPE), Tetric Ceram (Ivoclar Vivadent) and Aelite LS Posterior (Bisco)) with different photoinitiator systems were used. The resin composites were packed into a Teflon mold (8 mm diameter and 2 mm thickness) on a cover glass. After packing the composites, they were light cured with single-peak and dual-peak LEDs. The Knoop microhardness (KHN) and color difference (ΔE) for 30 days were measured. The data was analyzed statistically using a student’s t-test (p < 0.05). Results: All resin composites showed improved microhardness when a third-generation dual-peak LED light was used. The color stability was also higher for all resin composites with dual-peak LEDs. However,there was a significant difference only for Aelite LS Posterior. Conclusions: The dual-peak LEDs have a beneficial effect on the microhardness and color stability of resin composites formulated with a combination of camphorquinone and alternative photoinitiators. [J Kor Acad Cons Dent 2011;36(2):108-113.]
참고문헌 (21)
- Fan PL, "Curing-light intensity and depth of cure of resin-based composites tested according to international standards", J Am Dent Assoc, 133, pp.429~434 (2002)
- Yap AU, "Influence of curing lights and modes on cross-link density of dental composites", Oper Dent, 29, pp.410~415 (2004)
- Park YJ, "Development of a new photoinitiation system for dental light-cure composite resins", Dent Mater, 15, pp.120~127 (1999)
- Tak HS, "Influences of camphoroquinone on the properties of composites", J Kor Acad Cons Dent, 26, pp.41~50 (2001)
- Neumann MG, "The initiating radical yields and the efficiency of polymerization for various dental photoinitiators excited by different light curing units", Dent Mater, 22, pp.576~584 (2006)
- Burtscher P, "Efficiency of various light initiators after curing with different light-curing units", J Dent Res, ~ (2003)
- Neumann MG, "Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units", J Dent, 33, pp.525~532 (2005)
- de Souza Costa CA, "Effects of light-curing time on the cytotoxicity of a restorative resin composite applied to an immortalized odontoblast- cell line", Oper Dent, 28, pp.365~370 (2003)
- Imazato S, "Relationship between the degree of conversion and internal discoloration of light-activated composite", Dent Mater, 14, pp.23~30 (1995)
- Roh BD, "An experimental study of the degree of conversion and cytotoxicity of dual cure resin cements", J Kor Acad Cons Dent, 20, pp.33~53 (1995)
- Ferracane JL, "Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins", Dent Mater, 1, pp.11~14 (1985)
- Asmussen E, "An accelerated test for color stability of restorative resins", Acta Odontol Scand, 39, pp.329~332 (1981)
- 조영곤, "광중합원에 따른 복합레진의 색채변화", Restorative Dentistry and Endodontics, 27(1), pp.87~94 (2002), 대한치과보존학회
- Uhl A, "Second generation LEDs for the polymerization of oral biomaterials", Dent Mater, 20, pp.80~87 (2004)
- Price RB, "Third-generation vs a second-generation LED curing light: effect on Knoop microhardness", Compend Contin Educ Dent, 27, pp.490~496 (2006)
- Price RB, "Evaluation of a dual peak third generation LED curing light", Compend Contin Educ Dent, 26, pp.331~332 (2005)
- Schneider LF, "Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites", Dent Mater, 24, pp.1169~1177 (2008)
- Nomoto R, "Effect of light wavelength on polymerization of light-cured resins", Dent Mater, 16, pp.60~73 (1997)
- Arikawa H, "Light transmittance characteristics of light-cured composite resins", Dent Mater, 14, pp.405~411 (1998)
- Oysaed H, "Water sorption and filler characteristic of composites for use in posterior teeth", J Dent Res, 65, pp.1315~1318 (1986)
- Inokoshi S, "Opacity and color changes of tooth-colored restorative materials", Oper Dent, 21, pp.73~80 (1996)