Temperature changes under demineralized dentin during polymerization of three resin-based restorative materials using QTH and LED units

키워드

참고문헌 (40)

1. Ferracane JL., "Resin composite-state of the art", Dent Mater, 27, pp.29~38 (2011)
2. Knezević A, "Influence of light intensity from different curing units upon composite temperature rise", J Oral Rehabil, 32, pp.362~367 (2005)
3. Zach L, "Pulp response to externally applied heat", Oral Surg Oral Med Oral Pathol, 19, pp.515~530 (1965)
4. Atai M, "Temperature rise and degree of photopolymerization conversion of nanocomposites and conventional dental composites", Clin Oral Investig, 13, pp.309~316 (2009)
5. Dogan A, "Temperature rise induced by various light curing units through human dentin", Dent Mater J, 28, pp.253~260 (2009)
6. Yoon TH, "Degree of polymerization of resin composites by different light sources", J Oral Rehabil, 29, pp.1165~1173 (2002)
7. Bala O, "Effect of LED and halogen light curing on polymerization of resin-based composites", J Oral Rehabil, 32, pp.134~140 (2005)
8. Santini A, "Temperature rise within the pulp chamber during composite resin polymerisation using three different light sources", Open Dent J, 2, pp.137~141 (2008)
9. Bouillaguet S, "Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins", J Biomed Mater Res B Appl Biomater, 72, pp.260~267 (2005)
10. Mousavinasab SM, "Comparison of depth of cure, hardness and heat generation of LED and high intensity QTH light sources", Eur J Dent, 5, pp.299~304 (2011)
11. Hussey DL, "Thermographic measurement of temperature change during resin composite polymerization in vivo", J Dent, 23, pp.267~271 (1995)
12. Durey K, "Pulp chamber temperature rise during curing of resin-based composites with different light-curing units", Prim Dent Car, 15, pp.33~38 (2008)
13. Ratih DN, "Temperature change, dentinal fluid flow and cuspal displacement during resin composite restoration", J Oral Rehabil, 34, pp.693~701 (2007)
14. Yang B, "Remineralization of human natural caries and artificial caries-like lesions with an experimental whisker-reinforced ART composite", Acta Biomater, 7, pp.2303~2309 (2011)
15. Tosun G, "Temperature rise under normal and caries-affected primary tooth dentin disks during polymerization of adhesives and resincontaining dental materials", Dent Mater J, 27, pp.466~470 (2008)
16. Fanibunda KB., "Thermal conductivity of normal and abnormal human dentine", Arch Oral Biol, 20, pp.457~459 (1975)
17. Chen MH., "Update on dental nanocomposites", J Dent Res, 89, pp.549~560 (2010)
18. "About Giomer" (2012)[URL]
19. Lien W, "Physical properties of a new silorane-based restorative system", Dent Mater, 26, pp.337~344 (2010)
20. Goracci C, "Polymerization efficiency and flexural strength of low-stress restorative composites", Dent Mater, pp.0109~5641 (2014)[DOI]
21. Tarle Z, "Comparison of composite curing parameters: effects of light source and curing mode on conversion, temperature rise and polymerization shrinkage", Oper Dent, 31, pp.219~226 (2006)
22. Bouillaguet S, "Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins", J Biomed Mater Res B Appl Biomater, 72, pp.260~267 (2005)
23. Tarle Z, "The effect of the photopolymerization method on the quality of composite resin samples", J Oral Rehabil, 25, pp.436~442 (1998)
24. Yap AU, "Thermal emission by different lightcuring units", Oper Dent, 28, pp.260~266 (2003)
25. Mousavinasab SM, "Curing efficacy of light emitting diodes of dental curing units", J Dent Res Dent Clin Dent Prospects, 3, pp.11~16 (2009)
26. da Silva EM, "Influence of the degree of dentine mineralization on pulp chamber temperature increase during resin-based composite (RBC) light-activation", J Dent, 38, pp.336~342 (2010)
27. Miletic V, "Temperature changes in silorane-, ormocer-, and dimethacrylate-based composites and pulp chamber roof during light-curing", J Esthet Restor Dent, 21, pp.122~131 (2009)
28. 권수정, "Thermal irritation of teeth during dental treatment procedures", Restorative Dentistry and Endodontics, 38(3), pp.105~112 (2013), 대한치과보존학회[DOI]
29. 권영철, "전단접착강도와 관련된 Plasma Arc Curing Light의 중합효율평가", Restorative Dentistry and Endodontics, 33(3), pp.213~223 (2008), 대한치과보존학회
30. Nakajima M, "Elemental distributions and microtensile bond strength of the adhesive interface to normal and cariesaffected dentin", J Biomed Mater Res B Appl Biomater, 72, pp.268~275 (2005)
31. Pohto M, "Microscopic observations on living dental pulp. II. The effect of thermal irritants on the circulation of the pulp in the lower rat incisor", Acta Odontol Scand, 16, pp.315~327 (1958)
32. Al-Qudah AA, "Thermographic investigation of contemporary resincontaining dental materials", J Dent, 33, pp.593~602 (2005)
33. Loney RW, "Temperature transmission of highoutput light-curing units through dentin", Oper Dent, 26, pp.516~520 (2001)
34. Stanley HR Jr, "Reaction of the human pulp to cavity preparation: results produced by eight different operative grinding technics", J Am Dent Assoc, 58, pp.49~59 (1959)
35. Hannig M, "In vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater 1999;15:275-281", Dent Mater, 15, pp.275~281 (1999)
36. Chung K, "Degree of conversion of seven visible light-cured posterior composites", J Oral Rehabil, 15, pp.555~560 (1988)
37. Navarra CO, "Degree of conversion of Filtek Silorane Adhesive System and Clearfil SE Bond within the hybrid and adhesive layer: an in situ Raman analysis", Dent Mater, 25, pp.1178~1185 (2009)
38. Asmussen E., "Restorative resins: hardness and strength vs. quantity of remaining double bonds", Scand J Dent Res, 90, pp.484~489 (1982)
39. Ferracane JL, "Fourier transform infrared analysis of degree of polymerization in unfilled resinsmethods comparison", J Dent Res, 63, pp.1093~1095 (1984)
40. Mousavinasab SM, "Temperature rise during primer, adhesive, and composite resin photopolymerization of a low-shrinkage composite resin under caries-like dentin lesions", ISRN Dent, 2012, pp.198351~ (2012)

관련 논문AI추천