Effect of ultrasonic agitation on push-out bond strength and adaptation of root-end filling materials
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives This study evaluated the effect of ultrasonic agitation of mineral trioxide aggregate (MTA), calcium silicate-based cement (CSC), and Sealer 26 (S26) on adaptation at the cement/dentin interface and push-out bond strength. Materials and Methods Sixty maxillary canines were divided into 6 groups (n = 10): MTA, S26, and CSC, with or without ultrasonic activation (US). After obturation, the apical portions of the teeth were sectioned, and retrograde cavities were prepared and filled with cement by hand condensation. In the US groups, the cement was activated for 60 seconds: 30 seconds in the mesio-distal direction and 30 seconds in the buccal-lingual direction, using a mini Irrisonic insert coupled with the ultrasound transducer. After the materials set, 1.5-mm thick sections were obtained from the apexes. The presence of gaps and the bond between cement and dentin were analyzed using low-vacuum scanning electron microscopy. Push-out bond strength was measured using a universal testing machine. Results Ultrasonic agitation increased the interfacial adaptation of the cements. The S26 US group showed a higher adaptation value than MTA (p < 0.05). US improved the push-out bond strength for all the cements (p < 0.05). Conclusions The US of retrograde filling cements enhanced the bond to the dentin wall of the root-end filling materials tested.
Abstract
Objectives This study evaluated the effect of ultrasonic agitation of mineral trioxide aggregate (MTA), calcium silicate-based cement (CSC), and Sealer 26 (S26) on adaptation at the cement/dentin interface and push-out bond strength. Materials and Methods Sixty maxillary canines were divided into 6 groups (n = 10): MTA, S26, and CSC, with or without ultrasonic activation (US). After obturation, the apical portions of the teeth were sectioned, and retrograde cavities were prepared and filled with cement by hand condensation. In the US groups, the cement was activated for 60 seconds: 30 seconds in the mesio-distal direction and 30 seconds in the buccal-lingual direction, using a mini Irrisonic insert coupled with the ultrasound transducer. After the materials set, 1.5-mm thick sections were obtained from the apexes. The presence of gaps and the bond between cement and dentin were analyzed using low-vacuum scanning electron microscopy. Push-out bond strength was measured using a universal testing machine. Results Ultrasonic agitation increased the interfacial adaptation of the cements. The S26 US group showed a higher adaptation value than MTA (p < 0.05). US improved the push-out bond strength for all the cements (p < 0.05). Conclusions The US of retrograde filling cements enhanced the bond to the dentin wall of the root-end filling materials tested.
참고문헌 (30)
- Friedman S, "Dye leakage in retrofilled dog teeth and its correlation with radiographic healing", J Endod, 17, pp.392~395 (1991)[DOI]
- Lee SJ, "Sealing ability of a mineral trioxide aggregate for repair of lateral root perforations", J Endod, 19, pp.541~544 (1993)[DOI]
- Maroto M, "Dentin bridge formation after mineral trioxide aggregate (MTA) pulpotomies in primary teeth", Am J Dent, 18, pp.151~154 (2005)
- Duarte MAH, "Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate", Int Endod J, 45, pp.565~570 (2012)[DOI]
- Salem Milani A, "Mixing with propylene glycol enhances the bond strength of mineral trioxide aggregate to dentin", J Endod, 39, pp.1452~1455 (2013)[DOI]
- Camilleri J, "Hydration mechanisms of mineral trioxide aggregate", Int Endod J, 40, pp.462~470 (2007)[DOI]
- Coomaraswamy KS, "Effect of bismuth oxide radioopacifier content on the material properties of an endodontic Portland cement-based (MTA-like) system", J Endod, 33, pp.295~298 (2007)[DOI]
- Marciano MA, "Assessment of color stability of white mineral trioxide aggregate angelus and bismuth oxide in contact with tooth structure", J Endod, 40, pp.1235~1240 (2014)[DOI]
- Cutajar A, "Replacement of radiopacifier in mineral trioxide aggregate; characterization and determination of physical properties", Dent Mater, 27, pp.879~891 (2011)[DOI]
- Duarte MAH, "Radiopacity of portland cement associated with different radiopacifying agents", J Endod, 35, pp.737~740 (2009)[DOI]
- Marciano MA, "Calcium silicate-based sealers: Assessment of physicochemical properties, porosity and hydration", Dent Mater, 32, pp.e30~e40 (2016)
- Camilleri J, "Porosity and root dentine to material interface assessment of calcium silicate-based root-end filling materials", Clin Oral Investig, 18, pp.1437~1446 (2014)[DOI]
- Camilleri J, "Investigation of the hydration and bioactivity of radiopacified tricalcium silicate cement, Biodentine and MTA Angelus", Dent Mater, 29, pp.580~593 (2013)[DOI]
- Bernardes RA, "Evaluation of the flow rate of 3 endodontic sealers: Sealer 26, AH Plus, and MTA obtura", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 109, pp.47~49 (2010)
- Duarte MAH, "Evaluation of pH and calcium ion release of three root canal sealers", J Endod, 26, pp.389~390 (2000)[DOI]
- Siqueira JF, "Apical sealing ability of five endodontic sealers", Aust Endod J, 27, pp.33~35 (2001)[DOI]
- Tanomaru-Filho M, "Evaluation of periapical repair following retrograde filling with different root-end filling materials in dog teeth with periapical lesions", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 102, pp.127~132 (2006)[DOI]
- Harrison AJ, "The effect of ultrasonically activated irrigation on reduction of Enterococcus faecalis in experimentally infected root canals", Int Endod J, 43, pp.968~977 (2010)[DOI]
- Huffaker SK, "Influence of a passive sonic irrigation system on the elimination of bacteria from root canal systems: a clinical study", J Endod, 36, pp.1315~1318 (2010)[DOI]
- Duarte MAH, "Effect of ultrasonic activation on pH and calcium released by calcium hydroxide pastes in simulated external root resorption", J Endod, 38, pp.834~837 (2012)[DOI]
- Guimaraes BM, "Influence of ultrasonic activation of 4 root canal sealer on the filling quality", J Endod, 40, pp.964~968 (2014)[DOI]
- Aminoshariae A, "Placement of mineral trioxide aggregate using two different techniques", J Endod, 29, pp.679~682 (2003)[DOI]
- Yeung P, "A quantitative comparison of the fill density of MTA produced by two placement techniques", J Endod, 32, pp.456~459 (2006)[DOI]
- Bernabe PF, "Sealing ability of MTA used as a root end filling material: effect of the sonic and ultrasonic condensation", Braz Dent J, 24, pp.107~110 (2013)[DOI]
- Schneider SW, "A comparison of canal preparations in straight and curved root canals", Oral Surg Oral Med Oral Pathol, 32, pp.271~275 (1971)[DOI]
- Vivan RR, "Push-out bond strength of root-end filling materials", Braz Dent J, 27, pp.332~335 (2016)[DOI]
- Basturk FB, "The effect of various mixing and placement techniques on the compressive strength of mineral trioxide aggregate", J Endod, 39, pp.111~114 (2013)[DOI]
- Duque JA, "The effect of mixing method on tricalcium silicate-based cement", Int Endod J, 51, pp.69~78 (2018)[DOI]
- Xavier CB, "Root-end filling materials: apical microleakage and marginal adaptation", J Endod, 31, pp.539~542 (2005)[DOI]
- Maltezos C, "Comparison of the sealing of Resilon, Pro Root MTA, and Super-EBA as root-end filling materials: a bacterial leakage study", J Endod, 32, pp.324~327 (2006)[DOI]