본문 바로가기
KERD
논문KCI 등재

Push-out bond strength and marginal adaptation of apical plugs with bioactive endodontic cements in simulated immature teeth

2

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류치의학

초록

Objectives: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. Materials and Methods: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. Results: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). Conclusions: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.

Abstract

Objectives: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. Materials and Methods: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. Results: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). Conclusions: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.

참고문헌 (40)

  1. Sisli SN, "Comparative micro-computed tomographic evaluation of the sealing quality of ProRoot MTA and MTA Angelus apical plugs placed with various techniques", J Endod, 43, pp.147~151 (2017)
  2. Torabinejad M, "Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview - part II: other clinical applications and complications", Int Endod J, 51, pp.284~317 (2018)
  3. Ber BS, "Chemical modification of ProRoot MTA to improve handling characteristics and decrease setting time", J Endod, 33, pp.1231~1234 (2007)
  4. Guimarães BM, "Physicochemical properties of calcium silicate-based formulations MTA Repair HP and MTA Vitalcem", J Appl Oral Sci, 26, pp.e2017115~ (2018)
  5. Marciano MA, "Assessment of color stability of white mineral trioxide aggregate angelus and bismuth oxide in contact with tooth structure", J Endod, 40, pp.1235~1240 (2014)
  6. Możyńska J, "Tooth discoloration induced by different calcium silicate-based cements: a systematic review of in vitro studies", J Endod, 43, pp.1593~1601 (2017)
  7. Rajasekharan S, "Biodentine™ material characteristics and clinical applications: a 3 year literature review and update", Eur Arch Paediatr Dent, 19, pp.1~22 (2018)
  8. Vidal K, "Apical closure in apexification: a review and case report of apexification treatment of an immature permanent tooth with Biodentine", J Endod, 42, pp.730~734 (2016)
  9. Hachmeister DR, "The sealing ability and retention characteristics of mineral trioxide aggregate in a model of apexification", J Endod, 28, pp.386~390 (2002)
  10. Yilmaz Z, "Interaction of backfilling techniques and MTA plugs with additives: Fracture strength and adaptation analyses", Dent Mater J, 36, pp.809~815 (2017)
  11. Kadić S, "Push-out bond strength of three different calcium silicate-based root-end filling materials after ultrasonic retrograde cavity preparation", Clin Oral Investig, 22, pp.1559~1565 (2018)
  12. Tran D, "Comparative analysis of calcium silicate-based root filling materials using an open apex model", J Endod, 42, pp.654~658 (2016)
  13. Araújo AC, "Influence of smear layer removal and application mode of MTA on the marginal adaptation in immature teeth: a SEM analysis", Dent Traumatol, 29, pp.212~217 (2013)
  14. Bidar M, "Medication with calcium hydroxide improved marginal adaptation of mineral trioxide aggregate apical barrier", J Endod, 36, pp.1679~1682 (2010)
  15. López-García S, "In vitro evaluation of the biological effects of ACTIVA Kids BioACTIVE Restorative, Ionolux, and Riva Light Cure on human dental pulp stem cells", Materials (Basel), 12, pp.3694~3705 (2019)
  16. Ertas H, "Push-out bond strength of different mineral trioxide aggregates", Eur J Dent, 8, pp.348~352 (2014)
  17. Shokouhinejad N, "Effect of acidic environment on dislocation resistance of endosequence root repair material and mineral trioxide aggregate", J Dent (Tehran), 11, pp.161~166 (2014)
  18. Thompson JI, "Analysis of push-out test data based on interfacial fracture energy", J Mater Sci Mater Med, 10, pp.863~868 (1999)
  19. Saghiri MA, "Push-out bond strength of a nano-modified mineral trioxide aggregate", Dent Traumatol, 29, pp.323~327 (2013)
  20. Shokouhinejad N, "Effect of acidic environment on the push-out bond strength of mineral trioxide aggregate", J Endod, 36, pp.871~874 (2010)
  21. Camilleri J, "The chemical composition of mineral trioxide aggregate", J Conserv Dent, 11, pp.141~143 (2008)
  22. Stefaneli Marques JH, "Push-out bond strength of different tricalcium silicate-based filling materials to root dentin", Braz Oral Res, 32, pp.e18~ (2018)
  23. Jnl Silva EJ, "Push-out bond strength of MTA HP, a new high-plasticity calcium silicate-based cement", Braz Oral Res, 30 (2016)
  24. Bodanezi A, "Immediate and delayed solubility of mineral trioxide aggregate and Portland cement", J Appl Oral Sci, 16, pp.127~131 (2008)
  25. Bachoo IK, "A biocompatible and bioactive replacement for dentine: is this a reality? The properties and uses of a novel calcium-based cement", Br Dent J, 214, pp.E5~ (2013)
  26. Stabholz A, "Marginal adaptation of retrograde fillings and its correlation with sealability", J Endod, 11, pp.218~223 (1985)
  27. Johnson BR, "Considerations in the selection of a root-end filling material", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 87, pp.398~404 (1999)
  28. Zafar M, "Coronal and apical sealing ability of a new endodontic cement", Iran Endod J, 4, pp.15~19 (2009)
  29. Bolhari B, "Comparative scanning electron microscopic study of the marginal adaptation of four root-end filling materials in presence and absence of blood", J Dent (Tehran), 12, pp.226~234 (2015)
  30. Shokouhinejad N, "Marginal adaptation of new bioceramic materials and mineral trioxide aggregate: a scanning electron microscopy study", Iran Endod J, 9, pp.144~148 (2014)
  31. Costa AT, "Marginal adaptation of root-end filling materials: an in vitro study with teeth and replicas", J Contemp Dent Pract, 10, pp.75~82 (2009)
  32. Badr AE, "Marginal adaptation and cytotoxicity of bone cement compared with amalgam and mineral trioxide aggregate as root-end filling materials", J Endod, 36, pp.1056~1060 (2010)
  33. Gondim E Jr, "Investigation of the marginal adaptation of root-end filling materials in root-end cavities prepared with ultrasonic tips", Int Endod J, 36, pp.491~499 (2003)
  34. Teaford MF, "Live primates and dental replication: new problems and new techniques", Am J Phys Anthropol, 80, pp.73~81 (1989)
  35. Gondim E Jr, "Effect of sonic and ultrasonic retrograde cavity preparation on the integrity of root apices of freshly extracted human teeth: scanning electron microscopy analysis", J Endod, 28, pp.646~650 (2002)
  36. Bocker C, "Replica extraction method on nanostructured gold coatings and orientation determination combining SEM and TEM techniques", Microsc Microanal, 20, pp.1654~1661 (2014)
  37. Küçükkaya Eren S, "Sealing ability and adaptation of root-end filling materials in cavities prepared with different techniques", Microsc Res Tech, 80, pp.756~762 (2017)
  38. Bolhari B, "Comparative scanning electron microscopic study of the marginal adaptation of four root-end filling materials in presence and absence of blood", J Dent (Tehran), 12, pp.226~234 (2015)
  39. Torres FFE, "Micro-computed tomography high resolution evaluation of dimensional and morphological changes of 3 root-end filling materials in simulated physiological conditions", J Mater Sci Mater Med, 31, pp.14~ (2020)
  40. Küçükkaya Eren S, "Obturation quality of calcium silicate-based cements placed with different techniques in teeth with perforating internal root resorption: a micro-computed tomographic study", Clin Oral Investig, 23, pp.805~811 (2019)

이 간행물의 다른 논문 (13건)