Comparison of vibration characteristics of file systems for root canal shaping according to file length
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Objectives: No studies have yet assessed vibration characteristics according to endodontic file length. Accordingly, the objective of the present study was to examine the vibration characteristics according to nickel-titanium file length and to compare these characteristics between different file systems. Materials and Methods: A total of 45 root canal models were divided into 3 experimental groups (n = 15 each) based on the file system used (ProTaper Gold [PTG], ProTaper Next, or WaveOne Gold [WOG]). Each experimental group was further divided into 3 subgroups according to file length (21, 25, or 31 mm). An electric motor (X-SMART PLUS) was used in the experiment. For each file system, vibrations generated when using a size 25 file were measured and used to calculate the average vibration acceleration. The differences in vibrations were analyzed using 1-way analysis of variance and the Scheffé post hoc test with a confidence interval of 95%. Results: In the PTG file system, significantly lower vibration acceleration was observed when using a 21-mm file than when using a 31-mm file. In the WOG file system, significantly stronger vibration acceleration was observed when using a 31-mm file than when using 21- or 25-mm files. Regardless of the file length, the WOG group exhibited significantly stronger vibration acceleration than the other 2 experimental groups. Conclusions: In clinical practice, choosing a file with the shortest length possible could help reduce vibrations. Additionally, consideration should be given to vibrations that could be generated when using WOG files with reciprocating motion.
Abstract
Objectives: No studies have yet assessed vibration characteristics according to endodontic file length. Accordingly, the objective of the present study was to examine the vibration characteristics according to nickel-titanium file length and to compare these characteristics between different file systems. Materials and Methods: A total of 45 root canal models were divided into 3 experimental groups (n = 15 each) based on the file system used (ProTaper Gold [PTG], ProTaper Next, or WaveOne Gold [WOG]). Each experimental group was further divided into 3 subgroups according to file length (21, 25, or 31 mm). An electric motor (X-SMART PLUS) was used in the experiment. For each file system, vibrations generated when using a size 25 file were measured and used to calculate the average vibration acceleration. The differences in vibrations were analyzed using 1-way analysis of variance and the Scheffé post hoc test with a confidence interval of 95%. Results: In the PTG file system, significantly lower vibration acceleration was observed when using a 21-mm file than when using a 31-mm file. In the WOG file system, significantly stronger vibration acceleration was observed when using a 31-mm file than when using 21- or 25-mm files. Regardless of the file length, the WOG group exhibited significantly stronger vibration acceleration than the other 2 experimental groups. Conclusions: In clinical practice, choosing a file with the shortest length possible could help reduce vibrations. Additionally, consideration should be given to vibrations that could be generated when using WOG files with reciprocating motion.
참고문헌 (21)
- Grande NM, "Current assessment of reciprocation in endodontic preparation : a comprehensive review-part I : historic perspectives and current applications", J Endod, 41, pp.1778~1783 (2015)
- Shen Y, "Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments", J Endod, 39, pp.163~172 (2013)
- Plotino G, "Current assessment of reciprocation in endodontic preparation : a comprehensive review--part II : properties and effectiveness", J Endod, 41, pp.1939~1950 (2015)
- Topçuoğlu HS, "Cyclic fatigue resistance of Reciproc Blue and Reciproc files in an S-shaped canal", J Endod, 43, pp.1679~1682 (2017)
- Özyürek T, "Cyclic fatigue resistance of Reciproc, WaveOne, and WaveOne Gold nickel-titanium instruments", J Endod, 42, pp.1536~1539 (2016)
- Uygun AD, "Variations in cyclic fatigue resistance among ProTaper Gold, ProTaper Next and ProTaper Universal instruments at different levels", Int Endod J, 49, pp.494~499 (2016)
- Emmanuel Joao Nogueira Leal Silva, "Comparison of canal transportation in simulated curved canals prepared with ProTaper Universal and ProTaper Gold systems", Restorative Dentistry and Endodontics, 41(1), pp.1~5 (2016), 대한치과보존학회
- Vadhana S, "Cyclic fatigue resistance of RaCe and Mtwo rotary files in continuous rotation and reciprocating motion", J Endod, 40, pp.995~999 (2014)
- Ahn SY, "Kinematic effects of nickel-titanium instruments with reciprocating or continuous rotation motion : a systematic review of in vitro studies", J Endod, 42, pp.1009~1017 (2016)
- 전영주, "Vibration characteristics of endodontic motors with different motion: reciprocation and conventional rotation", 대한치과의사협회지, 52(12), pp.734~743 (2014), 대한치과의사협회[DOI]
- Choi DM, "Vibrations generated by several nickel-titanium endodontic file systems during canal shaping in an ex vivo model", J Endod, 43, pp.1197~1200 (2017)
- Di Nasso L, "Influences of 432 Hz music on the perception of anxiety during endodontic treatment : a randomized controlled clinical trial", J Endod, 42, pp.1338~1343 (2016)
- Kalpakjian S, "Manufacturing engineering and technology" (2001), Pearson Education
- Siddhpura M, "A review of chatter vibration research in turning", Int J Mach Tools Manuf, 61, pp.27~47 (2012)
- Quintana G, "Chatter in machining processes : a review", Int J Mach Tools Manuf, 51, pp.363~376 (2011)
- Zupanc J, "New thermomechanically treated NiTi alloys-a review", Int Endod J, 51, pp.1088~1103 (2018)
- Isik V, "Effect of shaft length on the torsional resistance of rotary nickel-titanium instruments", J Endod, 46, pp.295~300 (2020)
- Gagliardi J, "Evaluation of the shaping characteristics of ProTaper Gold, ProTaper NEXT, and ProTaper Universal in curved canals", J Endod, 41, pp.1718~1724 (2015)
- Nayak A, "Force and vibration generated in apical direction by three endodontic files of different kinematics during simulated canal preparation : an in vitro analytical study", Proc Inst Mech Eng H, 233, pp.839~848 (2019)
- Ruddle CJ, "Single-file shaping technique : achieving a gold medal result", Dent Today, 35, pp.98~103 (2016)
- 유연지, "왕복회전식 니켈-티타늄 파일을 이용한 근관 형성 시 발생하는 회전력 및 수직력에 대한 평가", 대한치과재료학회지, 41(1), pp.9~18 (2014), 대한치과재료학회[DOI]