본문 바로가기
KERD
논문KCI 등재

The effect of root canal preparation on the surface roughness of WaveOne and WaveOne Gold files: atomic force microscopy study

Koray Yılmaz|Taha Özyürek|Gülşah Uslu|Gianluca Plotino
대한치과보존학회 (Korean Academy Of Conservative Dentistry)|2018.02|Restorative Dentistry and Endodontics|제43권 제1호|pp. 43-50

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Atomic force microscopyUsageWaveOneNickel-titaniumWaveOne Gold
주제분류치의학

초록

Objectives To examine the surface topography of intact WaveOne (WO; Dentsply Sirona Endodontics) and WaveOne Gold (WOG; Dentsply Sirona Endodontics) nickel-titanium rotary files and to evaluate the presence of alterations to the surface topography after root canal preparations of severely curved root canals in molar teeth. Materials and Methods Forty-eight severely curved canals of extracted molar teeth were divided into 2 groups (n = 24/each group). In group 1, the canals were prepared using WO and in group 2, the canals were prepared using WOG files. After the preparation of 3 root canals, instruments were subjected to atomic force microscopy analysis. Average roughness and root mean square values were chosen to investigate the surface features of endodontic files. The data was analyzed using one-way analysis of variance and post hoc Tamhane's tests at 5% significant level. Results The surface roughness values of WO and WOG files significantly changed after use in root canals (p < 0.05). The used WOG files exhibited higher surface roughness change when compared with the used WO files (p < 0.05). Conclusions Using WO and WOG Primary files in 3 root canals affected the surface topography of the files. After being used in root canals, the WOG files showed a higher level of surface porosity value than the WO files.

Abstract

Objectives To examine the surface topography of intact WaveOne (WO; Dentsply Sirona Endodontics) and WaveOne Gold (WOG; Dentsply Sirona Endodontics) nickel-titanium rotary files and to evaluate the presence of alterations to the surface topography after root canal preparations of severely curved root canals in molar teeth. Materials and Methods Forty-eight severely curved canals of extracted molar teeth were divided into 2 groups (n = 24/each group). In group 1, the canals were prepared using WO and in group 2, the canals were prepared using WOG files. After the preparation of 3 root canals, instruments were subjected to atomic force microscopy analysis. Average roughness and root mean square values were chosen to investigate the surface features of endodontic files. The data was analyzed using one-way analysis of variance and post hoc Tamhane's tests at 5% significant level. Results The surface roughness values of WO and WOG files significantly changed after use in root canals (p < 0.05). The used WOG files exhibited higher surface roughness change when compared with the used WO files (p < 0.05). Conclusions Using WO and WOG Primary files in 3 root canals affected the surface topography of the files. After being used in root canals, the WOG files showed a higher level of surface porosity value than the WO files.

참고문헌 (41)

  1. Walia HM, "An initial investigation of the bending and torsional properties of Nitinol root canal fles", J Endod, 14, pp.346~351 (1988)[DOI]
  2. Plotino G, "A review of cyclic fatigue testing of nickel- titanium rotary instruments", J Endod, 35, pp.1469~1476 (2009)[DOI]
  3. Gambarini G, "Fatigue resistance of engine-driven rotary nickel-titanium instruments produced by new manufacturing methods", J Endod, 34, pp.1003~1005 (2008)[DOI]
  4. Plotino G, "Current assessment of reciprocation in endodontic preparation: a comprehensive review--Part II: properties and efectiveness", J Endod, 41, pp.1939~1950 (2015)[DOI]
  5. Karatas E, "Efect of movement kinematics on the cyclic fatigue resistance of nickel-titanium instruments", Int Endod J, 49, pp.361~364 (2016)[DOI]
  6. De-Deus G, "Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement", Int Endod J, 43, pp.1063~1068 (2010)[DOI]
  7. Pedulla E, "Infuence of continuous or reciprocating motion on cyclic fatigue resistance of 4 diferent nickel-titanium rotary instruments", J Endod, 39, pp.258~261 (2013)[DOI]
  8. Gutmann JL, "Alteration in the inherent metallic and surface properties of nickel-titanium root canal instruments to enhance performance, durability and safety: a focused review", Int Endod J, 45, pp.113~128 (2012)[DOI]
  9. Plotino G, "Blue treatment enhances cyclic fatigue resistance of vortex nickel-titanium rotary fles", J Endod, 40, pp.1451~1453 (2014)[DOI]
  10. Hieawy A, "Phase transformation behavior and resistance to bending and cyclic fatigue of ProTaper Gold and ProTaper Universal instruments", J Endod, 41, pp.1134~1138 (2015)[DOI]
  11. Plotino G, "Infuence of temperature on cyclic fatigue resistance of ProTaper Gold and ProTaper Universal rotary fles", J Endod, 43, pp.200~202 (2017)[DOI]
  12. Gambarini G, "Cyclic fatigue of ProFile rotary instruments afer prolonged clinical use", Int Endod J, 34, pp.386~389 (2001)[DOI]
  13. Plotino G, "A comparison of cyclic fatigue between used and new Mtwo Ni-Ti rotary instruments", Int Endod J, 39, pp.716~723 (2006)[DOI]
  14. Yamazaki-Arasaki A, "Topography of four diferent endodontic rotary systems, before and afer being used for the 12th time", Microsc Res Tech, 75, pp.97~102 (2012)[DOI]
  15. Plotino G, "Deformation and fracture incidence of Reciproc instruments: a clinical evaluation", Int Endod J, 48, pp.199~205 (2015)[DOI]
  16. Topuz O, "Structural efects of sodium hypochlorite solution on RaCe rotary nickel-titanium instruments: an atomic force microscopy study", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 105, pp.661~665 (2008)[DOI]
  17. Valois CR, "Atomic force microscopy study of stainless-steel and nickel-titanium fles", J Endod, 31, pp.882~885 (2005)[DOI]
  18. Fayyad DM, "Atomic force microscopic evaluation of nanostructure alterations of rotary NiTi instruments afer immersion in irrigating solutions", Int Endod J, 47, pp.567~573 (2014)[DOI]
  19. Kosti E, "Efect of root canal curvature on the failure incidence of ProFile rotary Ni-Ti endodontic instruments", Int Endod J, 44, pp.917~925 (2011)[DOI]
  20. Pruett JP, "Cyclic fatigue testing of nickel-titanium endodontic instruments", J Endod, 23, pp.77~85 (1997)[DOI]
  21. Sattapan B, "Defects in rotary nickel-titanium fles afer clinical use", J Endod, 26, pp.161~165 (2000)[DOI]
  22. Alapati SB, "Scanning electron microscope observations of new and used nickel-titanium rotary fles", J Endod, 29, pp.667~669 (2003)[DOI]
  23. Alapati SB, "SEM observations of nickel- titanium rotary endodontic instruments that fractured during clinical use", J Endod, 31, pp.40~43 (2005)
  24. Inan U, "Evaluation of the surface characteristics of used and new ProTaper Instruments: an atomic force microscopy study", J Endod, 33, pp.1334~1337 (2007)[DOI]
  25. Turker SA, "The efect of glide path on the surface quality of new and used rotary and reciprocating single fles: OneShape versus WaveOne", Scanning, 36, pp.608~613 (2014)[DOI]
  26. Caballero H, "Scanning electron microscopy of superfcial defects in Twisted fles and Reciproc nickel-titanium fles afer use in extracted molars", Int Endod J, 48, pp.229~235 (2015)[DOI]
  27. Cazaux J, "Recent developments and new strategies in scanning electron microscopy", J Microsc, 217, pp.16~35 (2005)[DOI]
  28. Fatma Y, "Evaluation of surface topography changes in three NiTi fle systems using rotary and reciprocal motion: an atomic force microscopy study", Microsc Res Tech, 77, pp.177~182 (2014)[DOI]
  29. Yang GB, "Shaping ability of progressive versus constant taper instruments in simulated root canals", Int Endod J, 39, pp.791~799 (2006)[DOI]
  30. Hulsmann M, "Mechanical preparation of root canals: shaping goals, techniques and means", Endod Topics, 10, pp.30~76 (2005)[DOI]
  31. Kum KY, "Shaping ability of three ProFile rotary instrumentation techniques in simulated resin root canals", J Endod, 26, pp.719~723 (2000)[DOI]
  32. Yao JH, "Cyclic fatigue of three types of rotary nickel-titanium fles in a dynamic model", J Endod, 32, pp.55~57 (2006)
  33. Pedulla E, "Cyclic fatigue resistance of two reciprocating nickel-titanium instruments afer immersion in sodium hypochlorite", Int Endod J, 46, pp.155~159 (2013)[DOI]
  34. Ferreira F, "A new method for the assessment of the surface topography of NiTi rotary instruments", Int Endod J, 50, pp.902~909 (2017)[DOI]
  35. Pirani C, "Wear and metallographic analysis of WaveOne and reciproc NiTi instruments before and afer three uses in root canals", Scanning, 36, pp.517~525 (2014)[DOI]
  36. Topcuoglu HS, "Laboratory comparison of cyclic fatigue resistance of WaveOne Gold, Reciproc and WaveOne fles in canals with a double curvature", Int Endod J, 50, pp.713~717 (2017)[DOI]
  37. Elsaka SE, "Torsional and bending resistance of WaveOne Gold, Reciproc and Twisted File Adaptive instruments", Int Endod J, 50, pp.1077~1083 (2017)[DOI]
  38. Ozyurek T, "Cyclic fatigue resistance of Reciproc, WaveOne, and WaveOne Gold nickel-titanium instruments", J Endod, 42, pp.1536~1539 (2016)[DOI]
  39. De-Deus G, "Blue thermomechanical treatment optimizes fatigue resistance and fexibility of the Reciproc fles", J Endod, 43, pp.462~466 (2017)[DOI]
  40. Trepanier C, "Efect of modifcation of oxide layer on NiTi stent corrosion resistance", J Biomed Mater Res, 43, pp.433~440 (1998)[DOI]
  41. Wever DJ, "Electrochemical and surface characterization of a nickel-titanium alloy", Biomaterials, 19, pp.761~769 (1998)[DOI]

관련 논문AI추천

Cyclic fatigue, bending resistance, and surface roughness of ProTaper Gold and EdgeEvolve files in canals with single- and double-curvatureWafaa A. Khalil, Zuhair S. Natto대한치과보존학회 · Restorative Dentistry and Endodontics2019 · 제44권 제2호Comparison of the shaping ability of novel thermally treated reciprocating instrumentsCangül Keskin대한치과보존학회 · Restorative Dentistry and Endodontics2018 · 제43권 제2호Cyclic fatigue resistance of the WaveOne Gold Glider, ProGlider, and the One G glide path instruments in double-curvature canalsAlper Kuştarcı, Damla Kırıcı대한치과보존학회 · Restorative Dentistry and Endodontics2019 · 제44권 제4호Comparison of vibration characteristics of file systems for root canal shaping according to file lengthCho Kyung-Mo, Ji Hyo-Jin, Kim Jin-Woo, Lee Eun-Hye, Park Se-Hee, Park Seong-Jun대한치과보존학회 · Restorative Dentistry and Endodontics2020 · 제45권 제4호Influence of operator's experience level on lifespan of the WaveOne Primary file in extracted teethAbdulrahman Mohammed Saleh,, Faahim Rashid, Noor Jamal Al Sammerraie, Pouyan Vakili-Gilani, Saeid Tavanafar,대한치과보존학회 · Restorative Dentistry and Endodontics2013 · 제38권 제4호A comparison of the shaping ability of reciprocating NiTi instruments in simulated curved canals유영실, 조용범대한치과보존학회 · Restorative Dentistry and Endodontics2012 · 제37권 제4호

이 간행물의 다른 논문 (12건)

Root canal irrigants influence the hydrophobicity and adherence of Staphylococcus epidermidis to root canal dentin: an in vitro studyVenkateshbabu Nagendrababu, Fabian Davamanipp. 1-8Influence of size and insertion depth of irrigation needle on debris extrusion and sealer penetrationEmel Uzunoglu-Özyürek, Hakan Karaaslan, Bahar Özçelik, Sevinç Aktemur Türkerpp. 9-18Root canal volume change and transportation by Vortex Blue, ProTaper Next, and ProTaper Universal in curved root canals문영미, 서민석, Hyun-Jin Parkpp. 19-28Comparison of bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and a universal adhesiveJi-Yeon Lee, 박정원, Sang In An, Jaechan Ahnpp. 28-34Micro-computed tomographic evaluation of canal retreatments performed by undergraduate students using different techniquesMariana Santoro Rocha, Brenda Leite Muniz, Felipe Gonçalves Belladonna, Emmanuel João Nogueira Leal Silva, Marianna Fernandes Carapiá,, Edson Jorge Lima Moreirapp. 35-43
원문 보기