Effect of number of uses and sterilization on the instrumented area and resistance of reciprocating instruments
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives: This study evaluated the effect of repeated uses and autoclaving in the instrumented area, fracture resistance, and time of instrumentation of thermally treated nickel-titanium reciprocating systems. Materials and Methods: Two hundred simulated canals were instrumented using Reciproc Blue and WaveOne Gold. Each file was used up to 10 times or until fracture. The instrumented area was measured in pre- and post-operative images, using ImageJ software. Kaplan-Meier survival analysis evaluated the number of uses of instruments before fracture. Instrumented area and time of instrumentation were analyzed by Mann-Whitney U test and Kruskal-Wallis. Correlations among the number of uses and instrumented area were measured. The level of statistical significance was set at p < 0.05. Results: Reciproc Blue presented a higher estimated number of uses in comparison with WaveOne Gold (p = 0.026), but autoclaving did not affect the resistance to fracture of instruments (p > 0.05). The instrumented area was different among the evaluated groups (p = 0.039), and the instrumented area along the uses of both tested instruments was reduced. With the time of instrumentation, there was also a significant difference among the evaluated groups; the groups without sterilization cycles were faster, in comparison to those submitted to autoclaving (p = 0.010). Conclusions: Reciproc Blue was more resistant than WaveOne Gold, suffering later fracture. Additionally, the sterilization cycles did not influence the estimated number of uses of thermally treated reciprocating instruments, but the instrumented area of root canals was reduced along with the repeated uses of both instruments.
Abstract
Objectives: This study evaluated the effect of repeated uses and autoclaving in the instrumented area, fracture resistance, and time of instrumentation of thermally treated nickel-titanium reciprocating systems. Materials and Methods: Two hundred simulated canals were instrumented using Reciproc Blue and WaveOne Gold. Each file was used up to 10 times or until fracture. The instrumented area was measured in pre- and post-operative images, using ImageJ software. Kaplan-Meier survival analysis evaluated the number of uses of instruments before fracture. Instrumented area and time of instrumentation were analyzed by Mann-Whitney U test and Kruskal-Wallis. Correlations among the number of uses and instrumented area were measured. The level of statistical significance was set at p < 0.05. Results: Reciproc Blue presented a higher estimated number of uses in comparison with WaveOne Gold (p = 0.026), but autoclaving did not affect the resistance to fracture of instruments (p > 0.05). The instrumented area was different among the evaluated groups (p = 0.039), and the instrumented area along the uses of both tested instruments was reduced. With the time of instrumentation, there was also a significant difference among the evaluated groups; the groups without sterilization cycles were faster, in comparison to those submitted to autoclaving (p = 0.010). Conclusions: Reciproc Blue was more resistant than WaveOne Gold, suffering later fracture. Additionally, the sterilization cycles did not influence the estimated number of uses of thermally treated reciprocating instruments, but the instrumented area of root canals was reduced along with the repeated uses of both instruments.
참고문헌 (31)
- Hasheminia SM, "Cone-beam computed tomographic analysis of canal transportation and centering ability of single-file systems", J Endod, 44, pp.1788~1791 (2018)
- Abu-Tahun IH, "Microscopic features of fractured fragment of nickel-titanium endodontic instruments by two different modes of torsional loading", Scanning, 2018, pp.9467059~ (2018)
- Es-Souni M, "On the transformation behaviour, mechanical properties and biocompatibility of two NiTi-based shape memory alloys: NiTi42 and NiTi42Cu7", Biomaterials, 22, pp.2153~2161 (2001)
- Zupanc J, "New thermomechanically treated NiTi alloys - a review", Int Endod J, 51, pp.1088~1103 (2018)
- Kiefner P, "Is the reciprocating movement per se able to improve the cyclic fatigue resistance of instruments?", Int Endod J, 47, pp.430~436 (2014)
- Silva EJNL, "Cyclic fatigue using severely curved canals and torsional resistance of thermally treated reciprocating instruments", Clin Oral Investig, 22, pp.2633~2638 (2018)
- Yamazaki-Arasaki A, "Topography of four different endodontic rotary systems, before and after being used for the 12th time", Microsc Res Tech, 75, pp.97~102 (2012)
- Emmanuel João Nogueira Leal Silva, "Influence of autoclave sterilization procedures on the cyclic fatigue resistance of heat-treated nickel-titanium instruments: a systematic review", Restorative Dentistry and Endodontics, 45(2), pp.1~12 (2020), 대한치과보존학회[DOI]
- Bueno CSP, "Fracture incidence of WaveOne and Reciproc files during root canal preparation of up to 3 posterior teeth: a prospective clinical study", J Endod, 43, pp.705~708 (2017)
- Bueno CSP, "Fracture incidence of WaveOne Gold files: a prospective clinical study", Int Endod J, 53, pp.1192~1198 (2020)
- Duque JA, "Cyclic fatigue resistance of nickel-titanium reciprocating instruments after simulated clinical use", J Endod (2020)[DOI]
- Spicciarelli V, "Shaping effectiveness and surface topography of reciprocating files after multiple simulated uses", J Oral Sci, 61, pp.45~52 (2019)
- Barros SGO, "Bending resistance and quantitative transportation assessment after multiple uses of a reciprocating instrument", Endod Pract Today, 12, pp.251~256 (2018)
- Taha Özyürek, "The effects of autoclave sterilization on the cyclic fatigue resistance of ProTaper Universal, ProTaper Next, and ProTaper Gold nickel-titanium instruments", Restorative Dentistry and Endodontics, 42(4), pp.301~308 (2017), 대한치과보존학회
- Di Nardo D, "Centering ability of a new nickel-titanium rotary instruments with a peculiar flat-side design: an in vitro study", J Contemp Dent Pract, 21, pp.539~542 (2020)
- Campanella V, "Shaping ability of Reciproc R25 file and Mtwo system used in continuous and reciprocating motion", J Contemp Dent Pract, 21, pp.171~177 (2020)
- Alfadley A, "Shaping ability of XP Endo Shaper file in curved root canal models", Int J Dent, 2020, pp.4687045~ (2020)
- Silva EJ, "Quantitative transportation assessment in simulated curved canals prepared with an adaptive movement system", J Endod, 41, pp.1125~1129 (2015)
- Coleman CL, "Analysis of Ni-Ti versus stainless steel instrumentation in resin simulated canals", J Endod, 23, pp.232~235 (1997)
- You SY, "Shaping ability of reciprocating motion in curved root canals: a comparative study with micro-computed tomography", J Endod, 37, pp.1296~1300 (2011)
- Gavini G, "Resistance to flexural fatigue of Reciproc R25 files under continuous rotation and reciprocating movement", J Endod, 38, pp.684~687 (2012)
- Pirani C, "Wear and metallographic analysis of WaveOne and reciproc NiTi instruments before and after three uses in root canals", Scanning, 36, pp.517~525 (2014)
- Cunha RS, "Assessment of the separation incidence of reciprocating WaveOne files: a prospective clinical study", J Endod, 40, pp.922~924 (2014)
- Özyürek T, "Cyclic fatigue resistances of Hyflex EDM, WaveOne gold, Reciproc blue and 2shape NiTi rotary files in different artificial canals", Odontology, 106, pp.408~413 (2018)
- Plotino G, "Experimental evaluation on the influence of autoclave sterilization on the cyclic fatigue of new nickel-titanium rotary instruments", J Endod, 38, pp.222~225 (2012)
- Zhao D, "Effect of autoclave sterilization on the cyclic fatigue resistance of thermally treated nickel-titanium instruments", Int Endod J, 49, pp.990~995 (2016)
- Champa C, "An analysis of cyclic fatigue resistance of reciprocating instruments in different canal curvatures after immersion in sodium hypochlorite and autoclaving: an in vitro study", J Conserv Dent, 20, pp.194~198 (2017)
- Kowalczuck A, "Evaluation of cutting ability and plastic deformation of reciprocating files", Braz Oral Res, 30, pp.1~6 (2016)
- Lim KC, "The validity of simulated root canals for the investigation of the prepared root canal shape", Int Endod J, 18, pp.240~246 (1985)
- Saber SEDM, "Comparative evaluation of the shaping ability of WaveOne, Reciproc and OneShape single-file systems in severely curved root canals of extracted teeth", Int Endod J, 48, pp.109~114 (2015)
- Bürklein S, "Shaping ability of reciprocating single-file systems in severely curved canals: WaveOne and Reciproc versus WaveOne Gold and Reciproc blue", Odontology, 107, pp.96~102 (2019)