2D numerical modeling of icebreaker advancing in ice-covered water
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper presents 2D numerical modeling to calculate shipeice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a shipeice contact detection technique and fluidestructural interaction of ice plate bending behavior. The ship eice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the shipeice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.
Abstract
This paper presents 2D numerical modeling to calculate shipeice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a shipeice contact detection technique and fluidestructural interaction of ice plate bending behavior. The ship eice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the shipeice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.
참고문헌 (14)
- Rigid body simulation I and II. Siggraph 97. Course notes, "Baraff, D.", ~ (1997)
- Cammaert, A.B., "Ice Interaction with Offshore Structures, Chapter 7, Static Global Ice Forces on Vertical Structures, Section 7.3", pp.232~233 (1988), Splitting Mode
- Dimgliana, J., "Graceful degradation of collision handling in physically based animation", Comput. Graph. Forum, 19(3), pp.239~248 (2000)[DOI]
- Farid, F., "Sea ice management trials during Oden Arctic Technology Research Cruise 2013 Offshore North East Greenland", Proceedings of the 22nd IAHR International Symposium on ICE, pp.518~525 (2014)
- Hamilton, J., "Simulation of ice management fleet opera- tions using two decades of Beaufort sea ice drift and thickness time histories", Proceedings of International Society of Offshore and Polar Engineers, pp.1100~1107 (2011)
- Lu, W., "Tentative fracture mechanics of the parallel channel effect during ice management, Paper No. 253", Proceeding of 23rd International Conference on Port and Ocean Engineering under Arctic Conditions (2015)
- Lu, W., "Fracture of an ice floe: local out-of-plane flexural failures versus global in-plane splitting failure", Cold Reg. Sci. Technol., 123, pp.1~13 (2016)[DOI]
- Lubbad, R., "A numerical model for real-time simulation of shipeice interaction", Cold Reg. Sci. Technol., 65(2), pp.111~127 (2011)[DOI]
- Michel, B., "Ice Mechanics" (1978)
- Sawamura, J., "Finite element analysis of fluideice inter-action during ice bending", 19th IAHR International Symposium on Ice, pp.191~132 (2008)
- Sawamura, J., "Numerical simulation of breaking pattern in level ice at ship's bow", Proceedings of 19th International Offshore and Polar Engineering Conference, pp.600~607 (2009)
- Sawamura, J., "Numerical investigation of ice bending failure and ice sub- merging force for ship maneuvering in level ice", The 21st IAHR International Symposium on Ice, pp.1116~1128 (2012)
- Sawamura, J., "Experimental and numerical investigation on ice submerging for icebreaker with 2D model test using synthetic ice, No. 34", Proceedings of the 23rd International Conference on Port and Ocean Engineering under Arctic Conditions, (34) (2015)
- Simulation of Ice Force and Breaking Pattern for Icebreaking Ship in Level Ice. OMAE2017-61583, "Sawamura, J.", ~ (2017)