Numerical and experimental investigation of the resistance performance of an icebreaking cargo vessel in pack ice conditions
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The resistance performance of an icebreaking cargo vessel in pack ice conditions was investigated numerically and experimentally using a recently developed finite element (FE) model and model tests. A comparison between numerical analysis and experimental results with synthetic ice in a standard towing tank was carried out. The comparison extended to results with refrigerated ice to examine the feasibility of using synthetic ice. Two experiments using two different ice materials gave a reasonable agreement. Ship-ice interaction loads are numerically calculated based on the fluid structure interaction (FSI) method using the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the Pusan National University towing tank, and with refrigerated ice at the National Research Council’s (NRC) ice tank, are used to validate and benchmark the numerical simulations. The designed icegoing cargo vessel is used as a target ship for three concentrations (90%, 80%, and 60%) of pack ice conditions. Ice was modeled as a rigid body but the ice density was the same as that in the experiments. The numerical challenge is to evaluate hydrodynamic loads on the ship’s hull; this is difficult because LS-DYNA is an explicit FE solver and the FSI value is calculated using a penalty method. Comparisons between numerical and experimental results are shown, and our main conclusions are given.
Abstract
The resistance performance of an icebreaking cargo vessel in pack ice conditions was investigated numerically and experimentally using a recently developed finite element (FE) model and model tests. A comparison between numerical analysis and experimental results with synthetic ice in a standard towing tank was carried out. The comparison extended to results with refrigerated ice to examine the feasibility of using synthetic ice. Two experiments using two different ice materials gave a reasonable agreement. Ship-ice interaction loads are numerically calculated based on the fluid structure interaction (FSI) method using the commercial FE package LS-DYNA. Test results from model testing with synthetic ice at the Pusan National University towing tank, and with refrigerated ice at the National Research Council’s (NRC) ice tank, are used to validate and benchmark the numerical simulations. The designed icegoing cargo vessel is used as a target ship for three concentrations (90%, 80%, and 60%) of pack ice conditions. Ice was modeled as a rigid body but the ice density was the same as that in the experiments. The numerical challenge is to evaluate hydrodynamic loads on the ship’s hull; this is difficult because LS-DYNA is an explicit FE solver and the FSI value is calculated using a penalty method. Comparisons between numerical and experimental results are shown, and our main conclusions are given.
참고문헌 (14)
- Gagnon, R. E., "Results of numerical simulations of growler impact tests", Cold Regions Science and Technology, 49(3), pp.206~214 (2007)
- Hallquist, J. O., "Ls-dyna keyword user's manual (version 971)", Livermore Software Technology Corp, Livermore, USA, ~ (2007)
- Ice tank test procedure at the institute for marine dynamics, "Jones, S. J.", Institute for Ocean Technology, National Research Council of Canada, ~, pp.Report No. LM-AVR-20 (1987)
- 김문찬, "합성얼음과 냉동얼음을 사용한 쇄빙선의 추진 성능 비교 연구", 한국해양공학회지, 23(1), pp.129~134 (2009), 한국해양공학회
- Kwok, R., "Deformation of the Arctic Ocean ice cover after the 2007 record minimum in summerice extent", Cold Regions Science and Technology, 76-77, pp.17~23 (2011)
- 이승호, "합성얼음의 두께변화와 선형변화에 따른 Pack ice 상태에서의 쇄빙상선의 저항특성 연구", 대한조선학회 논문집, 46(5), pp.471~478 (2009), 대한조선학회
- LS-DYNA, "Theoretical manual. Livermore Software Technology Corporation, USA", ~ (2006)
- Raed, L., "A numerical model for real-time simulation of ship–ice interaction", Cold Regions Science and Technology, 65(2), pp.111~127 (2011)
- 송윤영, "합성 얼음을 사용한 쇄빙선 저항시험에 대한 연구", 대한조선학회 논문집, 44(4), pp.389~397 (2007), 대한조선학회
- Timco, G. W., "EG", AD, Cold Regions Science and Technology, pp.1986, 12(2)[DOI]
- Valanto, P., "The resistance of ships in level ice", Society of Naval Architects and Marine Engineers Transactions, (109), pp.53~83 (2001)
- Ship performance in broken ice floes – Preliminary numerical simulations, "Wang, J.Y.", Institute for Ocean Technology, National Research Council, ~, pp.Report No.TR-2010-24 (2010)
- Wang, J.Y., "Numerical assessment for stationary structure (Kulluk) in moving broken ice", Proceedings of the 21st International Conference, Port and Ocean Engineering under Arctic Conditions. Montréal, Canada, pp.11~172 (2011)
- Wang, J.Y., "Numerical simulations of a tanker collision with a bergy bit incorporating hydrodynamics, a validated ice model and damage to the vessel", Cold Regions Science and Technology, 81, pp.26~35 (2012)