Numerical simulation of ice loads on a ship in broken ice fields using an elastic ice model
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The finite element method is used to simulate the navigation of an ice-area bulk carrier in broken ice fields. The ice material is defined as elastic, and the simulations are accomplished at four model speeds and three ice concentrations. The movements of ice floes in the simulation are consistent with those in the model test, and the percentage deviation of the numerical ice resistance from the ice resistance in the model test can be controlled to be less than 15 %. The key characteristics of ice loads, including the average ice loads, extreme ice loads, and characteristic frequency, are analyzed thoroughly in a comprehensive manner. Moreover, the effects of sailing speed and ice concentration on the ice loads are analyzed. In particular, the stress distribution of ice floes is presented to help understand how model speed and concentration affect the ice loads. The “ice pressure” phenomenon is observed at 90 % ice concentration, and it is realistically reflected both in the timeeand frequencyedomain ice force curves.
Abstract
The finite element method is used to simulate the navigation of an ice-area bulk carrier in broken ice fields. The ice material is defined as elastic, and the simulations are accomplished at four model speeds and three ice concentrations. The movements of ice floes in the simulation are consistent with those in the model test, and the percentage deviation of the numerical ice resistance from the ice resistance in the model test can be controlled to be less than 15 %. The key characteristics of ice loads, including the average ice loads, extreme ice loads, and characteristic frequency, are analyzed thoroughly in a comprehensive manner. Moreover, the effects of sailing speed and ice concentration on the ice loads are analyzed. In particular, the stress distribution of ice floes is presented to help understand how model speed and concentration affect the ice loads. The “ice pressure” phenomenon is observed at 90 % ice concentration, and it is realistically reflected both in the timeeand frequencyedomain ice force curves.
참고문헌 (23)
- Chai, W., "Short-term extreme ice loads prediction and fatigue damage evaluation for an icebreaker", Ships Offshore Struct, 13, pp.127~137 (2018)
- Guo, C. Y., "A numerical simulation method for resistance prediction of ship in Pack ice", J. Harbin Eng. Univ, 37(2), pp.145~150 (2016)
- Jian Hu, "Experimental and numerical study on ice resistance for icebreaking vessels", International Journal of Naval Architecture and Ocean Engineering, 7(3), pp.626~639 (2015), 대한조선학회
- Ice Tank Test Procedure at the Institute for Marine Dynamics, "Jones, S. J.", Institute for Ocean Technology, National Research Council of Canada, ~, pp.Report No. LM-AVR-20 (1987)
- Ji, S., "Discrete element modeling of ice loads on ship hulls in broken ice fields", Acta Oceanol. Sin, 32(11), pp.50~58 (2013)
- Kim, J., "Numerical simulation of ice impacts on ship hulls in broken ice fields", Ocean Eng, 180, pp.162~174 (2019)
- 김문찬, "Numerical and experimental investigation of the resistance performance of an icebreaking cargo vessel in pack ice conditions", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.116~131 (2013), 대한조선학회
- Lee, S. G., "Ice resistance test simulation of arctic cargo vessel using FSI analysis technique", Proceedings of the 23rd International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers (2013)
- Reports on Polar and Marine Research Vol. 586, the Expedition of the Research Vessel “Polarstern” to the Antarctic in 2006 (ANT-XXIII, "7), with Contributions of the Participants", Lemke, P., 2009, pp.145~
- Minghao Liu, "Peridynamic simulation of brittle-ice crushed by a vertical structure", International Journal of Naval Architecture and Ocean Engineering, 9(2), pp.209~218 (2017), 대한조선학회
- Liu, R. W., "Simulation of ship navigation in ice rubble based on peridynamics", Ocean Eng, 148, pp.286~298 (2018)
- LS-DYNA, "Theoretical Manual. Livermore Software", Technology Corporation, ~ (2006)
- Luo, W. Z., "Experimental research on resistance and motion attitude variation of shipewaveeice interaction in marginal ice zones", Mar. Struct, 58, pp.399~415 (2016)
- Millan, J., "Ice force modeling for DP control systems", Dynamic Positioning Conference 2011 (2011)
- Sodhi, D. S., "Characteristic frequency of force variations in continuous crushing of sheet ice against rigid cylindrical structures", Cold Reg. Sci. Technol, 12(1), pp.1~12 (1986)
- Sun, S., "Simulation of pancake ice load in a circular cylinder in a wave and current field", Cold Reg. Sci. Technol, 78, pp.31~39 (2012)
- Suyuthi, A., "Statistics of local ice load peaks on ship hulls", Struct. Saf, 40, pp.1~10 (2013)
- Suyuthi, A., "A generalized probabilistic model of ice load peaks on ship hulls in broken-ice fields", Cold Reg. Sci. Technol, 97, pp.7~20 (2014)
- Timco, G. W., "An investigation of the failure envelope of granular", discontinuous-columnar sea ice, 1984, pp.9, 17~27
- Full Scale Experience with Kulluk Stationkeeping Operation in Pack Ice (With Reference to Grand Banks Developments), "Wright, B.", PERD, 2000, pp.25~44
- Wang, J. Y., "Ship Performance in Broken Ice FloesePreliminary Numerical Simulations", Institute for Ocean Technology, National Research Council, ~ (2010)
- Wang, J. Y., "Numerical assessment for stationary structure (Kulluk) in moving broken ice", Proceedings of the 21st International Conference, Port and Ocean Engineering under Arctic Conditions (2011), POAC
- Zhang, J., "Sea ice floe size distribution in the marginal ice zone : Theory and numerical experiments", J. Geophys. Res. Oceans, 120(5), pp.3484~3498 (2015)