Development of an insulation performance measurement unit for full-scale LNG cargo containment system using heat flow meter method
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Efforts have been made in this paper to develop the measuring device for the insulation performance of full scale NO96 LNG CCS. The facility was designed to maintain environmental conditions which are similar to operation conditions of full scale LNG CCS. In the facility, the heat sink boundary was kept cryogenic temperature by cold chamber which contains liquefied nitrogen and heat source boundary was made by external case heated by natural convection. Heat Flow Meter method (HFM) was applied to this facility, hence Heat Flux Sensors (HFS) were attached to specimen. The equivalent thermal conductivity of full scale NO96 unit box was targeted to measure and PUF of same size was used for the calibration test. Additionally, the finite element analysis was carried out to check the performance of the developed test facility and experimental results were also compared with those predicted by the numerical method.
Abstract
Efforts have been made in this paper to develop the measuring device for the insulation performance of full scale NO96 LNG CCS. The facility was designed to maintain environmental conditions which are similar to operation conditions of full scale LNG CCS. In the facility, the heat sink boundary was kept cryogenic temperature by cold chamber which contains liquefied nitrogen and heat source boundary was made by external case heated by natural convection. Heat Flow Meter method (HFM) was applied to this facility, hence Heat Flux Sensors (HFS) were attached to specimen. The equivalent thermal conductivity of full scale NO96 unit box was targeted to measure and PUF of same size was used for the calibration test. Additionally, the finite element analysis was carried out to check the performance of the developed test facility and experimental results were also compared with those predicted by the numerical method.
참고문헌 (11)
- American Society for Testing., "Standard Practice for Calculating Thermal Transmission Properties Under Steady-state Conditions. ASTM C1045", ~ (2001)
- American Society for Testing., "Standard Test Method for Steady-state Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus. ASTM C518", ~ (2010)
- 최성웅, "실험적 열적 물성치를 반영한 CCS 방열박스의 열전달 해석", 한국전산구조공학회논문집, 24(4), pp.429~438 (2011), 한국전산구조공학회
- Hyun, B.S., "Study on MLI thermal modeling methods for satellite", The Korean Society for Aeronautical and Space Sciences 2003 Fall Conference (2003)
- Incropera, F.P., "Fundamentals of Heat and Mass Transfer", pp.571~577 (2006), John Willey & Sons
- 김동건, "모델 단순화에 의한 CFRP 복합 구조물의 유효 열전도율 추출 방법 연구", 한국전산유체공학회지, 20(4), pp.63~69 (2015), 한국전산유체공학회[DOI]
- Lee, J.H., "Determination of equivalent thermal conductivities of composite materials using homogenization technique", Trans. Korean Soc. Mech. Eng., 18(5), pp.1245~1252 (1993)
- 오홍영, "수직으로 설치된 비균질 평판 단열재용 성능시험장치 개발", 설비공학 논문집, 28(4), pp.153~157 (2016), 대한설비공학회[DOI]
- Park, H.C., "LNG carrier's heat transfer analysis and make a BOR estimate equation", The Korean Society of Mechanical Engineers 2009 Fall Conference (2009)
- Wang, J., "A new structural model of effective thermal conductivity for heterogeneous materials with co-continuous phases", Int. J. Heat Mass Transf., 51(9), pp.2389~2397 (2008)[DOI]
- 유동철, "통계적 방법을 이용한 이질재가 혼합된 목구조의 상당열관류율 예측", 한국건축친환경설비학회 논문집, 7(4), pp.265~273 (2013), 한국건축친환경설비학회