KC-1 Membrane LNG 탱크 단열시스템의 열해석에 관한 연구
Thermal Analysis of Insulation System for KC-1 Membrane LNG Tank
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Recently, a new type of LNG membrane Tank called the “KC-1 membrane LNG Tank” was developed by KOGAS (Korean Gas Corporation). It is necessary to estimate the temperature distribution of the hull structure and insulation system for this new LNG tank, as well as the BOR (Boil-Off Rate) when exposed to outside temperature conditions to ensure the integrity of the tank structure and limit LNG evaporation, from a safety evaluation point of view. In this study, temperature distribution calculations for the hull structure and insulation system of the KC1 membrane tank were compared by employing four numerical approaches under the IGC condition. Approaches 1–3 studied 2D simulations and approach 4 used a 3D numerical simulation. Approach 1 was calculated by in-house Excel VBA codes and the three other approaches utilized ANSYS Fluent. The BOR of approach 4, the 3D simulation case, for the IGC condition was 0.0986%/day.
Abstract
Recently, a new type of LNG membrane Tank called the “KC-1 membrane LNG Tank” was developed by KOGAS (Korean Gas Corporation). It is necessary to estimate the temperature distribution of the hull structure and insulation system for this new LNG tank, as well as the BOR (Boil-Off Rate) when exposed to outside temperature conditions to ensure the integrity of the tank structure and limit LNG evaporation, from a safety evaluation point of view. In this study, temperature distribution calculations for the hull structure and insulation system of the KC1 membrane tank were compared by employing four numerical approaches under the IGC condition. Approaches 1–3 studied 2D simulations and approach 4 used a 3D numerical simulation. Approach 1 was calculated by in-house Excel VBA codes and the three other approaches utilized ANSYS Fluent. The BOR of approach 4, the 3D simulation case, for the IGC condition was 0.0986%/day.
참고문헌 (24)
- ANSYS, F., "12.0 Theory Guide", ANSYS Inc, 5~ (2009)
- Cable, M., "An Evaluation of Turbulence Models for the Numerical Study of Forced and Natural Convective Flow in Atria", pp.2009
- Churchill, S. W., "Correlating Equations for Laminar and Turbulent Free Convection from a Vertical Plate", International Journal of Heat and Mass Transfer, 18(11), pp.1323~1329 (1975)
- Eckert, E. R. G., "Analysis of Heat and Mass Transfer", ~ (1987)
- Gavory, T., "Sloshing in Membrane LNG Carriers and its Consequences from a Designer’s Perspective", The Nineteenth International Offshore and Polar Engineering Conference (2009)
- 한기철, "단열 파우더를 채용한 LNGCC의 BOR예측에 관한 연구", 한국전산구조공학회논문집, 24(2), pp.193~200 (2011), 한국전산구조공학회
- Han, Y. Y., "The Development on the 3-Dimensional Calculation Program of Temperature Distribution for Gas Carriers", Proceedings of the 2006 Joint Conference on Korean Association of Ocean Science and Technology Societies, pp.504~510 (2006)
- 허진욱, "멤브레인형 LNG선 Cargo의 만선항해시 열전달 해석 및 BOG 평가", 대한기계학회논문집 A, 27(3), pp.393~400 (2003), 대한기계학회
- Heo, J. H., "Heat Flux Calculation for Thermal Equilibrium of Cofferdam in a LNG Carrier", Journal of the Society of Naval Architects of Korea, 35(1), pp.98~106 (1998)
- Heo, J. H., "Temperature Distribution for a Membrane type LNGC Cargo Tank", Journal of the Society of Naval Architects of Korea, 34(4), pp.108~118 (1997)
- Holman, J.P., "Heat Transfer" (2010), McGraw-Hill
- International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (I.G.C code), "IMO", International Maritime Organization, ~ (2003)
- 2016 Edition, World LNG Report, "International Gas Union", International Gas Union, ~ (2016)
- Jin, K. K., "An Effect of Surface Dashpot for KC-1 Basic Insulation System Under Sloshing Loads", Transactions of the KSME C: Industrial Technology and Innovation, 3(3), pp.193~199 (2015)
- Lee, B. J., "Current State of the Polymer Material Technology for Cryogenic", Prospectives of Industrial Chemistry, 17(5), pp.1~11 (2014)
- 이정혜, "급냉각기간에서 IMO 설계조건과 USCG 설계조건에 대한 LNGC 화물탱크의 열해석 비교", 대한기계학회논문집 B, 28(11), pp.1390~1397 (2004), 대한기계학회
- Lee, J. H., "Thermal Analysis for the GT-96 Membrane Type LNGC during the Cool-down Period", Proceedings of the Korean Society of Mechanical Engineers, pp.1346~1351 (2004)
- 이정혜, "급냉각기간에서 멤브레인형 LNGC의 분무냉각 열해석에 관한 연구", 대한기계학회논문집 B, 27(1), pp.16~ (2003), 대한기계학회
- Lee, Y. B., "Development of Polyurethane Foam Insulator with High Thermal Insulation Performance for KC-1LNG Carrier", The Twenty-fifth International Offshore and Polar Engineering Conference (2015)
- Miana, M., "Calculation of Boil-Off Rate of Liquefied Natural Gas in Mark III Tanks of Ship Carriers by Numerical Analysis", Applied Thermal Engineering, 93, pp.279~296 (2016)
- Rhee, S. H., "Unstructured Grid Based Reynolds-Averaged Navier-Stokes Method for Liquid Tank Sloshing", Journal of Fluids Engineering, 127(3), pp.572~582 (2005)
- Song, S. O., "A Study on the Three-Dimensional Steady State Temperature Distributions and BOR Calculation Program Deveolpment for the Membrane Type LNG Carrier", Journal of Korean Society of Marine Engineering, 23(2), pp.140~149 (1999)
- Vargaftik, N. B., "Handbook of Physical Properties of Liquids and Gases", Pure Substances and Mixtures, 663~717 (1996)
- Zakaria, M. S., "Computational Simulation of Boil-Off Gas Formation inside Liquefied Natural Gas Tank Using Evaporation Model in ANSYS Fluent", Applied Mechanics and Materials, pp.839~844 (2013)