EFFECT OF AN INTERMEDIATE BONDING RESIN AND FLOWABLE RESIN ON THE COMPATIBILITY OF TWO-STEP TOTAL ETCHING ADHESIVES WITH A SELF-CURING COMPOSITE RESIN
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study compared the effect of an activator, intermediate bonding resin and low-viscosity flowable resin on the microtensile bond strength of a self-curing composite resin used with two-step total etching adhesives. Twenty extracted permanent molars were used. The teeth were assigned randomly to nine groups (n=10) according to the adhesive system and application of additional methods (activator, intermediate adhesive, flowable resin). The bonding agents and additional applications of each group were applied to the dentin surfaces. Self-curing composite resin buildups were made for each tooth to form a core, 5mm in height. The restored teeth were then stored in distilled water at room temperature for 24h before sectioning. The microtensile bond strength of all specimens was examined. The data was analyzed statistically by one-way ANOVA and a Scheffe’s test. The application of an intermediate bonding resin (Optibond FL adhesive) and low-viscosity flowable resin (Tetric N-flow) produced higher bond strength than that with the activator in all groups. Regardless of the method selected, Optibond solo plus produced the lowest μTBS to dentin. The failure modes of the tested dentin bonding agents were mostly adhesive failure but there were some cases showed cohesive failure in the resin.
Abstract
This study compared the effect of an activator, intermediate bonding resin and low-viscosity flowable resin on the microtensile bond strength of a self-curing composite resin used with two-step total etching adhesives. Twenty extracted permanent molars were used. The teeth were assigned randomly to nine groups (n=10) according to the adhesive system and application of additional methods (activator, intermediate adhesive, flowable resin). The bonding agents and additional applications of each group were applied to the dentin surfaces. Self-curing composite resin buildups were made for each tooth to form a core, 5mm in height. The restored teeth were then stored in distilled water at room temperature for 24h before sectioning. The microtensile bond strength of all specimens was examined. The data was analyzed statistically by one-way ANOVA and a Scheffe’s test. The application of an intermediate bonding resin (Optibond FL adhesive) and low-viscosity flowable resin (Tetric N-flow) produced higher bond strength than that with the activator in all groups. Regardless of the method selected, Optibond solo plus produced the lowest μTBS to dentin. The failure modes of the tested dentin bonding agents were mostly adhesive failure but there were some cases showed cohesive failure in the resin.
참고문헌 (32)
- Franco EB, "Influence of pH of different adhesive systems on the polymerization of a chemically cured composite resin", Braz Dent J, 16(2), pp.107~111 (2005)
- Tay FR, "Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free acetone-based, single-bottle primer", adhesives, 1996, pp.12(4), 236~244
- Sanares AM, "Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites", Dent Mater, 16(3), pp.542~556 (2001)
- Swift EJ, "Effects of restorative and adhesive curing methods on dentin bond strengths", Am J Dent, 14(3), pp.137~140 (2001)
- 정문경, "접착레진의 추가도포가 자가부식형 접착제의 상아질에 대한 미세인장접착강도에 미치는 영향", 대한치과보존학회지, 31(2), pp.103~112 (2006), 대한치과보존학회
- Tay FR, "Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive", J Adhes Dent, 5(1), pp.27~40 (2003)
- Tay FR, "Effect of delayed activation of light-cured resin composites on bonding of all-in-one adhesives", J Adhes Dent, 3(3), pp.207~225 (2001)
- Tay FR, "Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive", J Adhes Dent, 5(2), pp.91~105 (2003)
- Giannini M, "Influence of activation mode of dual-cured resin composite cores and low-viscosity composite liners on bond strength to dentin treated with self-etching adhesives", J Adhes Dent, 6(4), pp.301~306 (2004)
- Belli S, "The effect of additional enamel etching and a flowable composite to the interfacial integrity of Class II adhesive composite restorations", Oper Dent, 26(1), pp.70~75 (2001)
- Jayasooriya PR, "Efficacy of a resin coating on bond strengths of resin cement to dentin", J Esthet Restor Dent, 15(2), pp.105~113 (2003)
- Montes MA, "morphological and tensile bond strength evaluation of an unfilled adhesive with low-viscosity composites and a filled adhesive in one and two coats", J Dent, 29(6), pp.435~441 (2001)
- Beznos C, "Microleakage at the cervical margin of composite Class II cavities with different restorative techniques", Oper Dent, 26(1), pp.60~69 (2001)
- Figueiredo Reis A, "The effects of filling techniques and a low-viscosity composite liner on bond strength to class II cavities", J Dent, 31(1), pp.59~66 (2003)
- Jayasooriya PR, "The effect of a “resin coating”on the interfacial adaptation of composite inlays", Oper Dent, 28(1), pp.28~35 (2003)
- Behle C, "Flowable composites: properties and applications", Pract Periodontics Aesthet Dent, 10(3), pp.347~ (1998)
- Leevailoj C, "Microleakage of posterior packable resin composites with and without flowable liners", Oper Dent, 26(3), pp.302~307 (2001)
- Mak YF, "Micro-tensile bond testing of resin cements to dentin and an indirect resin composite", Dent Mater, 18(8), pp.609~621 (2002)
- Swift EJ, "Dentin bonding, caries control", J Esthet Dent, 12(5), pp.236~237 (2000)
- Castellon P, "Shear bond strength of four core materials to dentin bonded with light-cured or dual-cured adhesive", Am J Dent, 17(6), pp.401~403 (2004)
- Nyunt MM, "Adhesion to dentin with resin using sulfinic acid initiator system", Dent Mater J, 15(2), pp.175~182 (1996)
- Imai Y, "Importance of polymerization initiator systems and interfacial initiation of polymerization in adhesive bonding of resin to dentin", J Dent Res, 70(7), pp.1088~1091 (1991)
- Nikaido T, "Effect of sulfonamides and 4-MET on adhesion to tooth substrates", Dent Mater, 6(2), pp.78~82 (1990)
- Munksgaard EC, "Dentin-polymer bond promoted by Gluma and various resins", J Dent Res, 64(12), pp.1409~1411 (1985)
- Kanca J, "Effect of resin primer solvents and surface wetness on resin composite bond strength to dentin", Am J Dent, 5(4), pp.213~215 (1992)
- Abate PF, "Evaporation of solvent in one-bottle adhesives", J Dent, 28(6), pp.437~440 (2000)
- 고근호, "법랑질 접착에 대한 습윤 효과", 대한치과보존학회지, 29(3), pp.205~211 (2004), 대한치과보존학회
- Jacobsen T, "Some effects of water on dentin bonding", Dent Mater, 11(2), pp.132~136 (1995)
- Giannini M, "Effects of the solvent evaporation technique on the degree of conversion of one-bottle adhesive systems", Oper Dent, 33(2), pp.149~154 (2008)
- Jacobsen T, "Effect of primer solvent, primer agitation, and dentin dryness on shear bond strength to dentin", Am J Dent, 11(5), pp.225~228 (1998)
- 조영곤, "자가 산부식 접착제로 접착된 광중합과 이원중합 복합레진의 법랑질 결합강도 비교", 대한치과보존학회지, 32(1), pp.1~8 (2007), 대한치과보존학회
- Powers CM, "Effects of distal cement voids on cement stress in total hip arthroplasty", J Arthroplasty, 13(7), pp.793~798 (1998)