Microleakage and characteristics of resin-tooth tissues interface of a self-etch and an etch-and-rinse adhesive systems

키워드

참고문헌 (39)

1. Buonocore MG, "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", J Dent Res, 34, pp.849~853 (1955)
2. Kugel G, "The science of bonding: from first to sixth generation", J Am Dent Assoc, 131, pp.20S~25S (2000)
3. Van Meerbeek B, "From Buonocore's pioneering acid-etch technique to self-adhering restoratives. A Status perspective of rapidly advancing dental adhesive technology", J Adhes Dent, 22, pp.7~34 (2020)
4. Sofan E, "Classification review of dental adhesive systems: from the IV generation to the universal type", Ann Stomatol (Roma), 8, pp.1~17 (2017)
5. Sezinando A, "Looking for the ideal adhesive – a review", Rev port Estomatol Med Dent Cir Maxilofac, 55, pp.194~206 (2014)
6. Giannini M, "Self-etch adhesive systems: a literature review", Braz Dent J, 26, pp.3~10 (2015)
7. Van Landuyt K, "Dental hard tissues and bonding", pp.89~122 (2005), Springer
8. Talungchit S, "Ethanol-wet bonding and chlorhexidine improve resin-dentin bond durability: quantitative analysis using raman spectroscopy", J Adhes Dent, 16, pp.441~450 (2014)
9. Taylor MJ, "Microleakage", J Dent, 20, pp.3~10 (1992)
10. Chen C, "Bonding of universal adhesives to dentine--Old wine in new bottles?", J Dent, 43, pp.525~536 (2015)
11. Moura SK, "Bond strength and morphology of enamel using self-etching adhesive systems with different acidities", J Appl Oral Sci, 17, pp.315~325 (2009)
12. Thanaratikul B, "Self-etch or etch-and-rinse mode did not affect the microshear bond strength of a universal adhesive to primary dentin", Dent Mater J, 35, pp.174~179 (2016)
13. Van Meerbeek B, "State of the art of self-etch adhesives", Dent Mater, 27, pp.17~28 (2011)
14. Abdalla AI, "Shear bond strength and microleakage of new dentin bonding systems", Am J Dent, 6, pp.295~298 (1993)
15. Yap AU, "Comparison of marginal sealing ability of new generation bonding systems", J Oral Rehabil, 25, pp.666~671 (1998)
16. Schuldt C, "Shear bond strength and microleakage of a self-etching adhesive for fissure sealing after different types of aging", Dent Mater J, 35, pp.490~497 (2016)
17. Mohammad ZK, "Microleakage in class II composite restorations bonded with self-etch, one-step, one-component adhesive system: a CLSM study", Int Med J, 22, pp.418~421 (1994)
18. Mauro SJ, "Effect of different adhesive systems on microleakage in class II composite resin restorations", Int J Adhes Adhes, 34, pp.6~10 (2012)
19. Waldman GL, "Microleakage and resin-to-dentin interface morphology of pre-etching versus self-etching adhesive systems", Open Dent J, 2, pp.120~125 (2008)
20. Armstrong S, "Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin", enamel using micro-tensile bond strength (μTBS) approach, 2017, pp.33, 133~143
21. Gale MS, "Thermal cycling procedures for laboratory testing of dental restorations", J Dent, 27, pp.89~99 (1999)
22. Gateva N, "Hybrid layer thickness in primary and permanent teeth - a comparison between total etch adhesives", J IMAB, 18, pp.191~199 (2012)
23. Pereira CN, "Qualitative evaluation of scanning electron microscopy methods in a study of the resin cement", dentine adhesive interface, 2014, pp.20, 268~275
24. Patel MU, "An in vitro evaluation of microleakage of posterior teeth restored with amalgam, composite and zirconomer - a stereomicroscopic study", J Clin Diagn Res, 9, pp.ZC65~ZC67 (2015)
25. El Sayed HY, "Marginal microleakage of composite resin restorations bonded by desensitizing one step self etch adhesive", Tanta Dent J, 11, pp.180~188 (2014)
26. Van Meerbeek B, "Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone", J Dent Res, 72, pp.495~501 (1993)
27. Wieczkowski G Jr, "Microleakage in various dentin bonding agent", composite resin systems, 1992, pp.Supplement 5, 62~67
28. Nakabayashi N, "Effect of HEMA on bonding to dentin", Dent Mater, 8, pp.125~130 (1992)
29. Vichi A, "Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations", Clin Oral Investig, 17, pp.1497~1506 (2013)
30. Tjäderhane L, "Strategies to prevent hydrolytic degradation of the hybrid layer - a review", Dent Mater, 29, pp.999~1011 (2013)
31. Van Landuyt KL, "Systematic review of the chemical composition of contemporary dental adhesives", Biomaterials, 28, pp.3757~3785 (2007)
32. Yoshihara K, "Chemical interaction of glycero-phosphate dimethacrylate (GPDM) with hydroxyapatite and dentin", Dent Mater, 34, pp.1072~1081 (2018)
33. Kenshima S, "Conditioning effect on dentin, resin tags and hybrid layer of different acidity self-etch adhesives applied to thick and thin smear layer", J Dent, 34, pp.775~783 (2006)
34. Dickens SH, "Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents", Dent Mater, 21, pp.354~364 (2005)
35. Sundfeld RH, "Hybrid layer thickness and resin tag length of a self-etching adhesive bonded to sound dentin", J Dent, 33, pp.675~681 (2005)
36. Alcantara-Galeana MdCZ, "Microhardness, structure, and morphology of primary enamel after phosphoric acid, self-etching adhesive, and Er:YAG laser etching", Int J Opt, 2017, pp.7634739~ (2017)
37. Wang R, "Adhesive interfacial characteristics and the related bonding performance of four self-etching adhesives with different functional monomers applied to dentin", J Dent, 62, pp.72~80 (2017)
38. Spencer P, "Adhesive phase separation at the dentin interface under wet bonding conditions", J Biomed Mater Res, 62, pp.447~456 (2002)
39. Gonçalves L, "Degradation of resin composites in a simulated deep cavity", Braz Dent J, 25, pp.532~537 (2014)

관련 논문AI추천