Flexural strength and microstructure of two lithium disilicate glass ceramics for CAD/CAM restoration in the dental clinic
1
조회
0
다운로드
2
인용
0
참고문헌
초록
Objectives: There has been a growing interest in glass ceramic systems with good esthetics, high fracture resistance and bonding durability, and simplified fabrication techniques using CAD/CAM. The aim of this study is to compare flexural strength before and after heat treatment of two lithium disilicate CAD/CAM blocks, IPS e.max CAD (Ivoclar Vivadent) and Rosetta SM (Hass), and to observe their crystalline structures. Materials and Methods: Biaxial flexural strength was tested according to ISO 6872with 20 disc form specimens sliced from each block before and after heat treatment. Also, the crystalline structures were observed using field-emission scanning microscopy (FE-SEM, Hitachi) and x-ray diffraction (XRD, Rigaku) analysis. The mean values of the biaxial flexural strength were analyzed by the Mann-Whitney U test at a significance level of p = 0.05. Results: There were no statistically significant differences in flexural strength between IPS e.max CAD and Rosetta SM either before heat treatment or after heat treatment. For both ceramics, the initial flexural strength greatly increased after heat treatment, with significant differences (p < 0.05). The FE-SEM images presented similar patterns of crystalline structure in the two ceramics. In the XRD analysis,they also had similar patterns, presenting high peak positions corresponding to the standard lithium metasilicate and lithium disilicate at each stage of heat treatment. Conclusions: IPS e.max CAD and Rosetta SM showed no significant differences in flexural strength. They had a similar crystalline pattern and molecular composition. (Restor Dent Endod 2013;38(3):134-140)
Abstract
Objectives: There has been a growing interest in glass ceramic systems with good esthetics, high fracture resistance and bonding durability, and simplified fabrication techniques using CAD/CAM. The aim of this study is to compare flexural strength before and after heat treatment of two lithium disilicate CAD/CAM blocks, IPS e.max CAD (Ivoclar Vivadent) and Rosetta SM (Hass), and to observe their crystalline structures. Materials and Methods: Biaxial flexural strength was tested according to ISO 6872with 20 disc form specimens sliced from each block before and after heat treatment. Also, the crystalline structures were observed using field-emission scanning microscopy (FE-SEM, Hitachi) and x-ray diffraction (XRD, Rigaku) analysis. The mean values of the biaxial flexural strength were analyzed by the Mann-Whitney U test at a significance level of p = 0.05. Results: There were no statistically significant differences in flexural strength between IPS e.max CAD and Rosetta SM either before heat treatment or after heat treatment. For both ceramics, the initial flexural strength greatly increased after heat treatment, with significant differences (p < 0.05). The FE-SEM images presented similar patterns of crystalline structure in the two ceramics. In the XRD analysis,they also had similar patterns, presenting high peak positions corresponding to the standard lithium metasilicate and lithium disilicate at each stage of heat treatment. Conclusions: IPS e.max CAD and Rosetta SM showed no significant differences in flexural strength. They had a similar crystalline pattern and molecular composition. (Restor Dent Endod 2013;38(3):134-140)
참고문헌 (18)
- Hooshmand T, "Effect of surface acid etching on the biaxial flexural strength of two hotpressed glass ceramics", J Prosthodont, 17, pp.415~419 (2008)
- Miyazaki T, "CAD", CAM systems available for the fabrication of crown and bridge restorations, 2011, pp.56(Supplement 1), 97~106
- Lin WS, "The effect of core material, veneering porcelain, and fabrication technique on the biaxial flexural strength and weibull analysis of selected dental ceramics", J Prosthodont, 21, pp.353~362 (2012)
- Gonzaga CC, "Effect of processing induced particle alignment on the fracture toughness and fracture behavior of multiphase dental ceramics", Dent Mater, 25, pp.1293~1301 (2009)
- Charlton DG, "Measurement of select physical and mechanical properties of 3 machinable ceramic materials", Quintessence Int, 39, pp.573~579 (2008)
- Siarampi E, "Flexural strength and the probability of failure of cold isostatic pressed zirconia core ceramics", J Prosthet Dent, 108, pp.84~95 (2012)
- Jin J, "Effect of test method on flexural strength of recent dental ceramics", Dent Mater J, 23, pp.490~496 (2004)
- "ISO 6872 Dentistry-Ceramic materials", International Organization for Standardization, 11~12 (2008)
- Albakry M, "Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials", J Prosthet Dent, 89, pp.374~380 (2003)
- 서덕규, "광중합형 레진의 3점 굴곡 강도와 이축 굴곡 강도 측정 방법에 대한 상대적 신뢰도의 비교", Restorative Dentistry and Endodontics, 31(1), pp.58~65 (2006), 대한치과보존학회
- Buso L, "Biaxial flexural strength of CAD", CAM ceramics, 2011, pp.60, 311~319
- Harrer W, "Influence of the surface quality of ceramic specimens on the results of B3Btests", 18th European Conference on Fracture (2010)
- Harrer W, "Influence of surface defects on the biaxial strength of a silicon nitride ceramic-Increase of strength by crack healing", J European Ceram Soc, 32, pp.27~35 (2012)
- Reich S, "Chair-side generated posterior lithium disilicate crowns after 4 years", Clin Oral Investig (2012), Clin Oral Investig
- Fasbinder DJ, "Materials for chairside CAD", CAM restorations, 2010, pp.31, 702~704
- Fischer J, "Flexural strength of veneering ceramics for zirconia", J Dent, 36, pp.316~321 (2008)
- Schultheis S, "Monolithic and bi-layer CAD", CAM lithium-disilicate versus metalceramic fixed dental prostheses: Comparison of fracture loads and failure modes after fatigue, 2013, pp.17, 1407~1413
- Kuzielová E, "Crystallization mechanism and bioactivity of lithium disilicate glasses in relation to CaO, P2O5, CaF2 addition", Ceram Silik, 51, pp.136~141 (2007)