Ultimate torsional strength of cracked stiffened box girders with a large deck opening

키워드

참고문헌 (39)

1. Alinia, M. M., "Influence of central cracks on buckling and post-buckling behaviour of shear panels", Thin- Walled Struct, 45(4), pp.422~431 (2007)
2. Benson, S., "A comparison of computational methods to predict the progressive collapse behaviour of a damaged box girder", Eng. Struct, 48(0), pp.266~280 (2013)
3. Brighenti, R., "Buckling and fracture behaviour of cracked thin plates under shear loading", Mater. Des, 32(3), pp.1347~1355 (2011)
4. Brighenti, R., "Buckling of cracked thin-plates under tension or compression", Thin-Walled Struct, 43(2), pp.209~224 (2005)
5. Fujikubo, M., "Estimation of ultimate strength of continuous stiffened panel under combined transverse thrust and lateral pressure part 2: continuous stiffened panel", Mar. Struct, 18(5-6), pp.411~427 (2005)
6. Gordo, J. M., "Experimental analysis of the effect of frame spacing variation on the ultimate bending moment of box girders", Mar. Struct, 37, pp.111~134 (2014)
7. Gordo, J. M., "Tests on ultimate strength of hull box girders made of high tensile steel", Mar. Struct, 22(4), pp.770~790 (2009)
8. Khedmati, M. R., "Empirical formulations for estimation of ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure", Thin Walled Struct, 48(3), pp.274~289 (2010)
9. Kim, K., "Ultimate strengths of steel rectangular box beams subjected to combined action of bending and torsion", Eng. Struct, 30(6), pp.1677~1687 (2008)
10. Nishihara, S., "Ultimate longitudinal strength of mid-ship cross section", Nav. Archit. Ocean Eng, 22, pp.200~214 (1984)
11. Ozguc, O., "A proposed method to evaluate hull girder ultimate strength", Ships Offshore Struct, 1(4), pp.335~345 (2006)
12. Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: part III hull girders", Ocean. Eng, 35(2), pp.281~286 (2008)
13. Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: part Idunstiffened plates", Ocean. Eng, 35(2), pp.261~270 (2008)
14. Paik, J. K., "Ultimate strength formulations for stiffened panels under combined axial load, in-plane bending and lateral pressure: a benchmark study", Thin Walled Struct, 40(1), pp.45~83 (2002)
15. Paik, J. K., "A semi-analytical method for the elastic-plastic large deflection analysis of stiffened panels under combined biaxial compression", tension, biaxial in-plane bending, edge shear, and lateral pressure loads, 2005, pp.43(3), 375~410
16. Paik, J. K., "Some recent developments on ultimate limit state design technology for ships and offshore structures", Ships Offshore Struct, 1(2), pp.99~116 (2006)
17. Paik, J. K., "Characteristics of welding induced initial deflections in welded aluminum plates", Thin-Walled Struct, 45(5), pp.493~501 (2007)
18. Paik, J. K., "Residual ultimate strength of steel plates with longitudinal cracks under axial compressiondnonlinear finite element method investigations", Ocean. Eng, 36(3-4), pp.266~276 (2009)
19. Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: part II stiffened panels", Ocean. Eng, 35(2), pp.271~280 (2008)
20. Paik, J. K., "Ultimate strength of cracked plate elements under axial compression or tension", Thin Walled Struct, 43(2), pp.237~272 (2005)
21. Pan, Z., "A semi-analytical analysis of the elastic buckling of cracked thin plates under axial compression using actual nonuniform stress distribution", Thin Walled Struct, 73, pp.229~241 (2013)
22. Qi, E., "Analytical method for ultimate strength calculations of intact and damaged ship hulls", Ships Offshore Struct, 1(1), pp.153~163 (2006)
23. Saad-Eldeen, S., "Analysis of plate deflections during ultimate strength experiments of corroded box girders", Thin Walled Struct, 54, pp.164~176 (2012)
24. Saad-Eldeen, S., "Effect of corrosion severity on the ultimate strength of a steel box girder", Eng. Struct, 49, pp.560~571 (2013)
25. Seifi, R., "Experimental and numerical studies on buckling of cracked thin-plates under full and partial compression edge loading", Thin Walled Struct, 49(12), pp.1504~1516 (2011)
26. Senjanovi
    c, I., "Some aspects of structural modelling and restoring stiffness in hydroelastic analysis of large container ships", Ships Offshore Struct, 9(2), pp.199~217 (2014)
27. Shanmugam, N. E., "Experimental studies on stiffened plates under in-plane load and lateral pressure", Thin Walled Struct, 80, pp.22~31 (2014)
28. Shi, G. J., "Ultimate strength model experiment regarding a container ship's hull structures", Ships Offshore Struct, 7(2), pp.1~20 (2012)
29. Sun, H. -H., "An experimental study of ultimate torsional strength of a ship-type hull girder with a large deck opening", Mar. Struct, 16(1), pp.51~67 (2003)
30. Tanaka, S., "Evaluation of ultimate strength of stiffened panels under longitudinal thrust", Mar. Struct, 36, pp.21~50 (2014)
31. Tanaka, Y., "Analysis method of ultimate hull girder strength under combined loads", Ships Offshore Struct, 10(5), pp.587~598 (2015)
32. Tekgoz, M., "Ultimate strength assessment of welded stiffened plates", Eng. Struct, 84, pp.325~339 (2015)
33. Ueda, Y., "Buckling and ultimate strength interaction in plates and stiffened panels under combined in-plane biaxial and shearing forces", Mar. Struct, 8(1), pp.1~36 (1995)
34. Vhanmane, S., "Estimation of ultimate hull girder strength with initial imperfections", Ships Offshore Struct, 3(3), pp.149~158 (2008)
35. Wang, F., "Ultimate shear strength of intact and cracked stiffened panels", Thin Walled Struct, 88, pp.48~57 (2015)
36. Xu, M. C., "Thin-walled structures residual ultimate strength assessment of stiffened panels with locked cracks", Thin Walled Struct, 85, pp.398~410 (2014)
37. Yao, T., "Influences of welding imperfections on buckling", ultimate strength of ship bottom plating subjected to combined bi-axial & lateral pressure, 1998, 425~432
38. Yao, T., "Hull girder strength", Mar. Struct, 16, pp.1~13 (2003)
39. Zhang, S., "Buckling and ultimate capability of plates and stiffened panels in axial compression", Mar. Struct, 22(4), pp.791~808 (2009)

관련 논문AI추천