Ultimate strength of stiffened plates with pitting corrosion
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Predicting residual strength of corroded plates is of crucial importance for service life estimation of aged structures. A series of nonlinear finite element method is employed for ultimate strength analysis of stiffened plates with pitting corrosion. Influential parameters, including plate thickness, type and size of stiffeners, pit depth and degree of pitting are varied and more than 208 finite element models are analyzed. It is found that ultimate strength is reduced by increasing pit depth to thickness ratio. Thin and intermediate plates have minimum and maximum reduction of ultimate strength with stronger stiffeners, respectively. In weak stiffener, reduction of ultimate strength in thin and intermediate plates depends on DOP. Reduction of ultimate strength in thick plates depends on thickness of plate and DOP. For intermediate plates, reduction for all stiffeners regardless of shape and size are the same.
Abstract
Predicting residual strength of corroded plates is of crucial importance for service life estimation of aged structures. A series of nonlinear finite element method is employed for ultimate strength analysis of stiffened plates with pitting corrosion. Influential parameters, including plate thickness, type and size of stiffeners, pit depth and degree of pitting are varied and more than 208 finite element models are analyzed. It is found that ultimate strength is reduced by increasing pit depth to thickness ratio. Thin and intermediate plates have minimum and maximum reduction of ultimate strength with stronger stiffeners, respectively. In weak stiffener, reduction of ultimate strength in thin and intermediate plates depends on DOP. Reduction of ultimate strength in thick plates depends on thickness of plate and DOP. For intermediate plates, reduction for all stiffeners regardless of shape and size are the same.
참고문헌 (16)
- Chapkis, D. T., "Simulation of pitting corrosion of hull plating under static loading", Trudy TSNIIMF, 82, pp.34~50 (1967)
- Eslami majd, A., "Deformation behavior of corroded plates subjected to blast loading", Ship and Offshore structures, 10(1), pp.79~93 (2014)
- Nakai, T., "Effect of pitting corrosion on local strength of hold frames of the bulk carriers(2nd report)-lateral distortional buckling and local face buckling", Marine Structures, 17, pp.612~641 (2004)
- Nakai, T., "Pitting corrosion and its influence on local strength of hull structural members", 24th international conference on offshore mechanics and arctic engineering, Halkidiki, Greece (2005)
- Ok, D., "Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression", Marine Structures, 20(1-2), pp.100~114 (2007)
- Paik, J. K., "Ultimate compressive strength of plate elements with pit corrosion wastage", Journal of Engineering for the Maritime Environment, 217(M4), pp.185~200 (2003)
- Paik, J. K., "Ultimate strength formulations for stiffened panels under combined axial load, in-plane bending and lateral pressure : a benchmark study", Thin-Walled Structures, 40(1), pp.45~83 (2002)
- Paik J. K., "Ultimate shear strength of plate elements with pit corrosion wastage", Thin-Walled Structures, 42, pp.1161~1176 (2004)
- Paik, J. K., "Methods for ultimate limit state assessment of ships and ship-shaped offshore structures : Part II stiffened panels", Ocean Engineering, 35(2), pp.271~280 (2008)
- Rahbar-Ranji, A., "Stress analysis of a randomly undulated plate due to corrosion in marine structures", 박사, pp.2001
- Rahbar-Ranji, A., "Ultimate strength of corroded steel plates with irregular surfaces under in-plane compression", Ocean Engineering, 54, pp.261~269 (2012)
- Rahbar-Ranji, A., "Elastic buckling strength of corroded steel plates", Sadhana-Academy Proceedings in Engineering Sciences, 38(1), pp.89~99 (2013)
- Rahbar-Ranji, A., "Buckling analysis of partially corroded steel plates with irregular surfaces", Sadhana-Academy Proceedings in Engineering Sciences, 39(2), pp.511~524 (2014)
- TSCF, "Guidelines for the inspection and condition assessment of tanker structure", Tanker Structure Co-operative Forum (1993)
- Yao, T., "On loading and boundary conditions for buckling", plastic collapse analysis of continuous stiffened plate by FEM, 1998, 305~314
- Yikun, W., "Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage : a review. Corrosion marine corrosion damage : a review", Corrosion Science, 86, pp.42~60 (2014)