Detection of Manufacturing Defects in Stiffness of CFTA Girder usingStatic Loading
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper presents a study on the nonlinear behavior of an innovative bridge girder made from concrete-filled and tied tubular steel arch (CFTA) under static loading. Manufacturing of the CFTA girder may have defects which may highly affect the symmetry and performance of the structure. A simple method is proposed by using stiffness extracted from static test data to detect manufacturing defects of the CFTA girder. A three-dimensional finite element model was used in the numerical analysis in order to verify the method. The proposed method was experimentally validated through static tests of the CFTA girder. The application of the proposed method showed that it is effective in identifying invisible manufacturing defects of the CFTA girder, especially for mass production of a standard type in the factory.
Abstract
This paper presents a study on the nonlinear behavior of an innovative bridge girder made from concrete-filled and tied tubular steel arch (CFTA) under static loading. Manufacturing of the CFTA girder may have defects which may highly affect the symmetry and performance of the structure. A simple method is proposed by using stiffness extracted from static test data to detect manufacturing defects of the CFTA girder. A three-dimensional finite element model was used in the numerical analysis in order to verify the method. The proposed method was experimentally validated through static tests of the CFTA girder. The application of the proposed method showed that it is effective in identifying invisible manufacturing defects of the CFTA girder, especially for mass production of a standard type in the factory.
참고문헌 (18)
- Ahmad, S.H, "Complete Triaxial Stress-Strain Curves for Concrete", J. Struct. Div., ASCE, 108, pp.728~742 (1982)
- Charles, R.W., "Composite Action in Concrete Filled Tubes", Journal of Structural Engineering, ASCE, 5(5), pp.477~484 (1999)
- Chaudhary, S., "Hybrid Procedure for Cracking, Creep,Shrinkage and Thermal Gradient in ContinuousComposite Bridges", Latin American Journal ofSolids and Structures, 4(3), pp.203~227 (2007)
- Chaudhary, S., "Control of Creep and Shrinkage Effects inSteel Concrete Composite Bridges with PrecastDecks", Journal of Bridge Engineering, ASCE, 14(5), pp.336~345 (2009)
- Choi, E.S., "A New Steel Jacketing Method for Concrete Cylinders and Comparison of the Results with a Constitutive Model", International Journal of Railway, 1(2), pp.72~78 (2008)
- Chou C.C., "Hysteretic Model Development and Seismic Response of Unbounded Post-Tensioned Precast CFT Segmental Bridge Columns", Earthquake Engineering and Structural Dynamics, 37, pp.919~934 (2008)
- Elchalakani, M, "Concrete-Filled Circular Steel Tubes Subjectedto Pure Bending", Journal of Constructional SteelResearch, 57, pp.1141~1168 (2001)
- Giannopoulos, G, "Numerical Analysis and Experimental Validation for Static Loads of a Composite Bridge Structure", Journal of Composite Structures, 62, pp.235~243 (2003)
- Huang, C.S., "Axial Load Behavior of Stiffened Concrete-Filled Steel Columns", Journal of Structural Engineering, ASCE, 128, pp.1222~1230 (2002)
- Jeong, M.C., "Linear Behavior Analysis and Stability Assessment of CFTA Girder", 2009 Conference of Computational Structural Engineering Institute of Korea (2009)
- Kosteski, N., "A Finite Element Method Based Yield Load Determination Procedure for Hollow Structural Section Connections", Journal of Constructional Steel Research, 59(4), pp.453~471 (2003)
- Lee, H., "Analysis of Static Behavior of CFTA Girder", The Fourth International Conference on Bridge Maintenance, Safety and Management (IABMAS'08), pp.13~17 (2008)
- Lu, H, "Analytical Behavior of Circular Concrete-Filled Thin-Walled Steel Tubes Subjected to Bending", Thin-Walled Structures, 47, pp.346~358 (2009)
- Nakamura, Sh.I, "New Technologies of Steel", Concrete Composite Bridge, 2002, pp.58, 99~130
- Nakamura, Sh.I., "Static Analysis of Cable-Stayed Bridge with CFT Arch Ribs", Journal of Constructional Steel Research, 65, pp.776~783 (2008)
- Roh, H, "Dynamic Amplification Factor of ConcreteFilled Tubular Arch (CFTA) Girder due to theEffects of Moving Vehicles and PT Tendons", 2011Conference of Computational Structural EngineeringInstitute of Korea (2009)
- Trinh Thai Trung, "Dynamic Behavior and Reliability Assessment of a CFTA girder subjected to Truck Collision", International Journal of STEEL STRUCTURES, 8(4), pp.315~324 (2008), 한국강구조학회
- Varma, A.H., "Experimental Behavior of High StrengthSquare Concrete-Filled Steel Tube Beam-Columns", Journal of Structural Engineering, ASCE, 1285(3), pp.309~418 (2002)