Hull form design for the fore-body of medium-sized passenger ship with gooseneck bulb
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The recent IMO MEPC regulation on EEDI, EEOI and increased fuel cost has worsened the financial condition of the small and medium sized passenger ferry companies, and it is situated to acquire the economic ships with a pretty high resistance performance. The purpose of this research is to develop a design method on the efficient gooseneck bulb for the middle-sized passenger ferry operated in the Far East Asian seas. The hull forms are designed by varying the gooseneck bulb parameters to find the changes on the resistance performance according to the shape of bulb. The numerical series tests are made to derive the regression equation for estimating the resistance through analyzing the data statistically. This equation is set as an objective function, and then using the optimization algorithm searches for the optimal combination of the design variables. After a hull form is designed corresponding to optimized parameters.
Abstract
The recent IMO MEPC regulation on EEDI, EEOI and increased fuel cost has worsened the financial condition of the small and medium sized passenger ferry companies, and it is situated to acquire the economic ships with a pretty high resistance performance. The purpose of this research is to develop a design method on the efficient gooseneck bulb for the middle-sized passenger ferry operated in the Far East Asian seas. The hull forms are designed by varying the gooseneck bulb parameters to find the changes on the resistance performance according to the shape of bulb. The numerical series tests are made to derive the regression equation for estimating the resistance through analyzing the data statistically. This equation is set as an objective function, and then using the optimization algorithm searches for the optimal combination of the design variables. After a hull form is designed corresponding to optimized parameters.
참고문헌 (26)
- 최희종, "SQP법을 이용한 최적선형개발에 대한 연구", 한국항해항만학회지, 30(10), pp.867~873 (2006), 한국항해항만학회
- Choi, N., "Study on the optimization of bulbous bow shape considering the operating profile of ships", Proceedings of the Annual Spring Meeting, pp.1075~1082 (2014), SNAK
- Joint High Speed Sealift (JHSS) Baseline Shaft & Strut (Model 5653) Series 1: Bare Hull Resistance, Appended Resistance, and Alternative Bow Evaluations, "Cusanelli, Dominic S.", Naval Surface Warfare Center Carderock Division, ~ (2007)
- Harries, S., "Advanced hydrodynamic design of container carriers for improved transport efficiency", RINA Conf. Design & Operation of Container Ships (2006)
- Heimann, J., "Optimization of the wave-making characteristics of fast ferries", Proceedings of 7th Int. Conference on Fast Sea Transportation FAST’03 (2003)
- Heimann, J., "CFD Based Optimization of the Wave-making Characteristics of Ship Hulls", Doctor, pp.2005
- Hirayama, A., "Study on multiobjective hull optimization for reducing wave-making resistance and wave-breaking: multiobjective hull optimization using real-coded genetic algorithm", J. Jpn. Soc. Nav. Archit. Ocean Eng, (5), pp.185~193 (2007)
- Hong, S. W., "Estimation of ship resistance by statistical analysis and its application to hull form modification", J. Soc. Nav. Archit. Korea, 25(4), pp.28~38 (1988)
- James, R., "The modern superyacht; enlarged yacht or smaller ship?", Proceedings of 19th International HISWA Symposium on Yacht design and Yacht Construction, pp.21~32 (2006)
- 장학수, "고속 대형여객선의 선형특성에 대한 연구", 대한조선학회 논문집, 40(4), pp.1~7 (2003), 대한조선학회
- 정광열, "삼차원 직교격자계를 이용한 규칙파 중 부유체 주위 유동의 수치시물레이션", 박사, 조선해양공학과 조선해양공학전공, pp.2013
- Kracht, A. M., "Design of bulbous bows", SNAME Trans, 86, pp.197~217 (1978)
- Kim, H.C, "Resistance and Propulsion of the Ship" (2009), The ship fluid dynamics research group, The Society of Naval Architects of Korea
- 이화준, "트윈스케그 적용 대형 로팩스선의 선형개발", 대한조선학회 논문집, 49(6), pp.491~497 (2012), 대한조선학회
- Lee, Y. M., "Comparative study on hull form optimization methods", Proceedings of the Annual Spring Meeting, 2001, pp.244~248 (2001), SNAK
- Min, K. S., "A study on the regression analysis for the prediction of resistance and propulsion characteristics of full slow-speed ships", J. Soc. Nav. Archit. Korea, 27(1), pp.84~98 (1990)
- Ossanen, P., "Motor yacht hull form design for the displacement to semi-displacement speed range", Proceedings of 10th International Conference on Fast Sea Transportation FAST 2009 (2009)
- 박동우, "고속 Ro-Pax선형의 조파저항성능 향상을 위한 최적 선형설계에 관한 연구", 한국항해항만학회지, 36(10), pp.787~793 (2012), 한국항해항만학회[DOI]
- Park, J. S., "A Comparison Study of the Bulbous Bow Shape for LPG Carrier", pp.31~37 (2005), Society of Naval Architects of Korea
- Park, S. H., "Regression Analysis" (1998), Minyoungsa
- Perez, F., "Geometric modeling of bulbous bows with the use of non-uniform rational B-spline surfaces", J. Mar. Sci. Technol, 12, pp.83~94 (2007)
- Schneekluth, H., "Ship Design for Efficiency and Economy" (1987), Hutterworths
- Tahara, Y., "An application of computational fluid dynamic to tanker hull form optimization problem", Proceedings of 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design, pp.515~531 (1998)
- 이영길, "수치시뮬레이션기법을 이용한 거위목 벌브의 저항성능에 관한 연구", 대한조선학회 논문집, 47(5), pp.689~696 (2010), 대한조선학회
- 유진원, "중형 여객선의 저항성능 향상을 위한 선수벌브의형상 개선 연구", 대한조선학회 논문집, 51(4), pp.334~341 (2014), 대한조선학회
- Yu, J. W., "A Design Method on the Optimal Bulbous Bow of Gooseneck Shape for Medium-sized Passenger Ship", Doctor, pp.2015