Development of formulation Q1As method for quadrupole noise prediction around a submerged cylinder
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recent research has shown that quadrupole noise has a significant influence on the overall characteristics of flow-induced noise and on the performance of underwater appendages such as sonar domes. However, advanced research generally uses the Ffowcs WilliamseHawkings analogy without considering the quadrupole source to reduce computational cost. In this study, flow-induced noise is predicted by using an LES turbulence model and a developed formulation, called the formulation Q1As method to properly take into account the quadrupole source. The noise around a circular cylinder in an underwater environment is examined for two cases with different velocities. The results from the method are compared to those obtained from the experiments and the permeable FWeH method. The results are in good agreement with the experimental data, with a difference of less than 1 dB, which indicates that the formulation Q1As method is suitable for use in predicting quadrupole noise around underwater appendages.
Abstract
Recent research has shown that quadrupole noise has a significant influence on the overall characteristics of flow-induced noise and on the performance of underwater appendages such as sonar domes. However, advanced research generally uses the Ffowcs WilliamseHawkings analogy without considering the quadrupole source to reduce computational cost. In this study, flow-induced noise is predicted by using an LES turbulence model and a developed formulation, called the formulation Q1As method to properly take into account the quadrupole source. The noise around a circular cylinder in an underwater environment is examined for two cases with different velocities. The results from the method are compared to those obtained from the experiments and the permeable FWeH method. The results are in good agreement with the experimental data, with a difference of less than 1 dB, which indicates that the formulation Q1As method is suitable for use in predicting quadrupole noise around underwater appendages.
참고문헌 (21)
- Ansys, "Ansys Fluent 12.0 Theory Guide", Aerodynamically Generated Noise, 421~432 (2009)
- Brentner, K. S., "An efficient and robust method for predicting helicopter rotor high-speed impulsive noise", J. Sound Vib, 203(1), pp.87~100 (1997)
- Brentner, K. S., "Modeling aerodynamically generated sound of helicopter rotors", Prog. Aerosp. Sci, 39, pp.83~120 (2003)
- Woen-Sug Choi, "Turbulence-induced noise of a submerged cylinder using a permeable FW-H method", International Journal of Naval Architecture and Ocean Engineering, 8(3), pp.235~242 (2016), 대한조선학회
- Curle, N., "The influence of solid boundaries upon aerodynamic sound", Proc. R. Soc. Lond. Ser. A Math. Phys. Sci, 231(1187), pp.505~514 (1955)
- Di Francescantonio, D., "A new boundary integral formulation for the prediction of sound radiation", J. Sound Vib, 202(4), pp.491~509 (1997)
- Derivation of Formulations 1 and 1A of Farassat, "Farassat, F.", NASA, ~, pp.NASA (2007), TM-2007-214853
- Farassat, F., "The uses and abuses of the acoustic analogy in helicopter rotor noise prediction", J. Am. Helicopter Soc, 33, pp.29~36 (1987)
- Ffowcs Williams, J. E., "Sound generation by turbulence and surfaces in arbitrary motion", Philos. Trans. R. Soc. Lond. A, 264(1151), pp.321~342 (1969)
- Hanson, D. B., "The importance of quadrupole sources in prediction of transonic tip speed propeller noise", J. Sound Vib, 62, pp.19~38 (1979)
- Ianniello, S., "Ship underwater noise assessment by the acoustic analogy, part II: hydroacoustic analysis of a ship scaled model", J. Mar. Sci. Technol, 19, pp.52~74 (2014)
- Hrvoje Jasak, "OpenFOAM : Open source CFD in research and industry", International Journal of Naval Architecture and Ocean Engineering, 1(2), pp.89~94 (2009), 대한조선학회
- Lighthill, M. J., "On sound generated aerodynamically, I: general theory", Proc. R. Soc. A, 221, pp.564~587 (1952)
- Norberg, C., "Fluctuating lift on a circular cylinder: review and new measurement", J. Fluids Struct, 17(1), pp.57~96 (2003)
- OpenFOAM, "OpenFOAM the Open Source CFD Toolbox User Guide", 123~128 (2011)
- Orselli, R. M., "Two and Three-dimensional Simulation of Sound Generated by Flow Around a Circular Cylinder", pp.2009~3270 (2009), American Institute of Aeronautics and Astronautics, AIAA
- Park, I. C., "2-dimensional Simulation of Flow-induced Noise Around Circular Cylinder", pp.2012
- Schmitz, F. H., "Theoretical modeling of high-speed helicopter impulsive noise", Paper Presented at the Third European Rotorcraft and Powered Lift Aircraft Forum (1977)
- Wang, M., "Computational prediction of flowgenerated sound", Annual Review of Fluid Mechanics, 38, pp.483~512 (2006)
- Weller, H. G., "A tensorial approach to computational continuum mechanics using object-oriented techniques", Comput. Phys, 12(6), pp.620~631 (1998)
- Zhang, H., "Large-eddy simulation of the flow past both finite and infinite circular cylinders at Re ¼ 390", J. Hydrodyn. Ser. B, 27, pp.195~203 (2015)