수치시뮬레이션기법을 이용한 거위목 벌브의 저항성능에 관한 연구
A Study on the Resistance Performance of the Goose Neck Bulbous Bow by Numerical Simulation Method
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Bulbous bow is one of the important design factors on the design of fore-body hull form. Using the interference technique of ship waves, the bulbous bow can decrease the wave resistance of ship. Recently, the goose neck bulb is applied mainly for high speed vessels like passenger ships and ferries etc.. Also, the goose neck bulb is applied for relatively high speed merchant vessels like container ships and LNG carriers. However, existing research papers about the goose neck bulb are not enough as reference data for the design of bow hull form. In this study, numerical calculations are carried out to investigate the bow wave characteristics of a high speed ferry with a normal high nose bulb or a goose neck bulb. By comparing the pressure distributions on the hull surface and the wave systems near the bow, the features of wave resistance reduction are discussed. Also, Numerical calculations were carried out for a series of goose neck bulbs to figure out the optimum bulb size. The maximum reduction rate of pressure resistance for the fore-body is achievable up to 8% by adopting the goose neck bulb in the present calculation.
Abstract
Bulbous bow is one of the important design factors on the design of fore-body hull form. Using the interference technique of ship waves, the bulbous bow can decrease the wave resistance of ship. Recently, the goose neck bulb is applied mainly for high speed vessels like passenger ships and ferries etc.. Also, the goose neck bulb is applied for relatively high speed merchant vessels like container ships and LNG carriers. However, existing research papers about the goose neck bulb are not enough as reference data for the design of bow hull form. In this study, numerical calculations are carried out to investigate the bow wave characteristics of a high speed ferry with a normal high nose bulb or a goose neck bulb. By comparing the pressure distributions on the hull surface and the wave systems near the bow, the features of wave resistance reduction are discussed. Also, Numerical calculations were carried out for a series of goose neck bulbs to figure out the optimum bulb size. The maximum reduction rate of pressure resistance for the fore-body is achievable up to 8% by adopting the goose neck bulb in the present calculation.
참고문헌 (14)
- Joint High Speed Sealift (JHSS) Baseline Shaft & Strut (Model 5653) Series 1: Bare Hull Resistance, Appended Resistance, and Alternative Bow Evaluations, "Cusanelli, D.S", Naval Surface Warfare Center Carderock Division, ~, pp.Report NSWCCD-50-TR- 20071066 (2007)
- Harries, S, "Advanced hydrodynamic design of container carriers for improved transport efficiency", RINA Conf. Design & Operation of Container Ships (2006)
- Heimann, J, "Optimization of the Wave-Making Characteristics of Fast Ferries", 7th Int. Conference on Fast Sea Transportation FAST’03 (2003)
- Heimann, J, "CFD Based Optimization of the Wave-Making Characteristics of Ship Hulls", Doktor der Ingenieurwissenschaften genehmigte Dissertation der Technischen Universität Berlin, ~ (2005)
- Hir, C.W, "Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries", Journal of Computational Physics, 39, pp.201~225 (1981)
- James R, "The Modern Superyacht ; Enlarged Yacht or Smaller Ship?", 19th Int. HUSWA Symposium on Yacht Design and Yacht Construction, pp.13~14 (2006)
- 정광열, "선수부 갑판침입수의 수치시뮬레이션에 대한 기초연구", 대한조선학회 논문집, 47(2), pp.188~195 (2010), 대한조선학회
- Development of a Numerical Computation Method Simulating the Wave Breaking Phenomenon around a Ship, "Lee, Y.G", Ministry of Science and Technology, ~, pp.Report No. R01-2005-000-10878-0 (2008)
- Lee, Y.G, "Numerical Simulation of Wave Breaking Near Ship Bow", Journal of Ship and Ocean Technology, 12(1), pp.16~27 (2008)
- Maisonneuve, J.J, "Towards Optimal Design of Ship Hull Shapes", IMDC’03, Athens (2003)
- Park, J.C, "Computations of Free-Surface Flows by Use of Marker and Cell Method", Proceeding of th Annual Autumn Meeting, Korea Society of Computational Fluids Engineering, pp.138~147 (1995)
- Park, J.S, "A Comparison Study of the Bulbous Bow Shape for LPG Carrier", Special Issue of the Society of Naval Architects of Korea, pp.31~37 (2005)
- Research group of The ship fluid dynamics, "Resistance and propulsion of ship" (2009), Jisungsa
- Valdenazzi, F, "The FANTASTIC RoRo: CFD Optimisation of the Forebody and its Experimental Verification", Int. Conf. on Ship and Shipping Research NAV’03 (2003)