Color discrepancy of single-shade composites at different distances from the interface measured using cell phone images
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives This study aimed to evaluate the impact of substrate color and interface distance on the color adjustment of 2 single-shade composites, Vittra APS Unique and Charisma Diamond One. Materials and Methods Dual disc-shaped specimens were created using Vittra APS Unique or Charisma Diamond One as the center composite, surrounded by shaded composites (A1 or A3). Color measurements were taken with a spectrophotometer against a gray background, recording the color coordinates in the CIELAB color space. Illumination with a light-correcting device and image acquisition using a polarizing filter-equipped cell phone were performed on specimens over the same background. Image processing software was used to measure the color coordinates in the center and periphery of the inner composite and in the outer composite. The color data were then converted to CIELAB coordinates and adjusted using data from the spectrophotometer. Color differences (ΔE00) between the center/periphery of single-shade and outer composites were calculated, along with color changes in single-shade composites caused by different outer composites. Color differences for the inner composites surrounded by A1 and A3 were also calculated. Data were analyzed using repeated-measures analysis of variance (α = 0.05). Results The results showed that color discrepancies were lowest near the interface and when the outer composite was whiter (A1). Additionally, Charisma Diamond One exhibited better color adjustment ability than Vittra APS Unique. Conclusions Color discrepancies between the investigated single-shade composites diminished towards the interface with the surrounding composite, particularly when the latter exhibited a lighter shade.
Abstract
Objectives This study aimed to evaluate the impact of substrate color and interface distance on the color adjustment of 2 single-shade composites, Vittra APS Unique and Charisma Diamond One. Materials and Methods Dual disc-shaped specimens were created using Vittra APS Unique or Charisma Diamond One as the center composite, surrounded by shaded composites (A1 or A3). Color measurements were taken with a spectrophotometer against a gray background, recording the color coordinates in the CIELAB color space. Illumination with a light-correcting device and image acquisition using a polarizing filter-equipped cell phone were performed on specimens over the same background. Image processing software was used to measure the color coordinates in the center and periphery of the inner composite and in the outer composite. The color data were then converted to CIELAB coordinates and adjusted using data from the spectrophotometer. Color differences (ΔE00) between the center/periphery of single-shade and outer composites were calculated, along with color changes in single-shade composites caused by different outer composites. Color differences for the inner composites surrounded by A1 and A3 were also calculated. Data were analyzed using repeated-measures analysis of variance (α = 0.05). Results The results showed that color discrepancies were lowest near the interface and when the outer composite was whiter (A1). Additionally, Charisma Diamond One exhibited better color adjustment ability than Vittra APS Unique. Conclusions Color discrepancies between the investigated single-shade composites diminished towards the interface with the surrounding composite, particularly when the latter exhibited a lighter shade.
참고문헌 (25)
- Trifkovic B, "Color adjustment potential of resin composites", Clin Oral Investig, 22, pp.1601~1607 (2018)
- Barros MS, "Effect of surrounded shade and specimen’s thickness on color adjustment potential of a single-shade composite", Braz Dent J, 33, pp.126~132 (2022)
- Barros MS, "Effects of surrounding and underlying shades on the color adjustment potential of a single-shade composite used in a thin layer", Restor Dent Endod, 48, pp.e7~ (2023)
- de Abreu JL, "Analysis of the color matching of universal resin composites in anterior restorations", J Esthet Restor Dent, 33, pp.269~276 (2021)
- Korkut B, "Two-year retrospective evaluation of monoshade universal composites in direct veneer and diastema closure restorations", J Esthet Restor Dent, 35, pp.525~537 (2023)
- Forabosco E, "Effect of bleaching on the color match of single-shade resin composites", J Oral Sci, 65, pp.232~236 (2023)
- Durand LB, "Color, lightness, chroma, hue, and translucency adjustment potential of resin composites using CIEDE2000 color difference formula", J Esthet Restor Dent, 33, pp.836~843 (2021)
- Barros MS, "Background and surrounding colors affect the color blending of a single-shade composite", Braz Oral Res, 37, pp.e035~ (2023)
- de Melo Oliveira I, "Color heterogeneity and individual color changes in dentin and enamel bleached in the presence of a metallic orthodontic bracket", J Esthet Restor Dent, 33, pp.262~268 (2021)
- de Livi GJ, "The role of interface distance and underlying substrate on the color adjustment potential of single-shade composites", J Esthet Restor Dent, 35, pp.1279~1285 (2023)
- Tam WK, "Dental shade matching using a digital camera", J Dent, 40(Supplement 2), pp.e3~e10 (2012)
- Lazar R, "The accuracy of dental shade matching using cross-polarization photography", Int J Comput Dent, 22, pp.343~351 (2019)
- de Bragança RM, "Color assessment of resin composite by using cellphone images compared with a spectrophotometer", Restor Dent Endod, 46, pp.e23~ (2021)
- Rondón LF, "Comparison of visual shade matching and photographic shade analysis", J Esthet Restor Dent, 34, pp.374~382 (2022)
- Brokos I, "Illuminant metameric effects on interbrand and intrabrand color differences of direct composite resins", J Prosthet Dent, 128, pp.1342~1349 (2022)
- Yilmaz B, "Effect of cross-polarization filters on the trueness of colors obtained with a single-lens reflex camera, macro lens, and a ring flash", J Esthet Restor Dent, 35, pp.878~885 (2023)
- Soares KD, "Is it possible to determine the optical properties of resin composites with clinical spectrophotometers?", Color Res Appl, 47, pp.706~716 (2022)
- "ISO 11664-2:2007. Colorimetry — Part 2: CIE standard illuminants", International Organization for Standardization, ~ (2007)
- "ISO", CIE 11664-1:2019. Colorimetry — Part 1: CIE standard colorimetric observers, 2019
- Araujo FS, "Effects of adhesive used as modeling liquid on the stability of the color and opacity of composites", J Esthet Restor Dent, 30, pp.427~433 (2018)
- Carney MN, "A novel regression model from RGB image data to spectroradiometric correlates optimized for tooth colored shades", J Dent, 51, pp.45~48 (2016)
- Luo MR, "The development of the CIE 2000 colour-difference formula : CIEDE2000", Color Res Appl, 26, pp.340~350 (2001)
- Sharma G, "The CIEDE2000 color-difference formula : Implementation notes, supplementary test data, and mathematical observations", Color Res Appl, 30, pp.21~30 (2005)
- Paravina RD, "Color difference thresholds in dentistry", J Esthet Restor Dent, 27(Supplement 1), pp.S1~S9 (2015)
- Nixon M, "Accurate device-independent colorimetric measurements using smartphones", PLoS One, 15, pp.e0230561~ (2020)