Effects of a relined fiberglass post with conventional and self-adhesive resin cement
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objectives This study was conducted to evaluate the mechanical properties of relined and non-relined fiberglass posts when cemented to root canal dentin using a conventional dual-cure resin cement or a self-adhesive resin cement. Materials and Methods Two types of resin cements were utilized: conventional and self-adhesive. Additionally, 2 cementation protocols were employed, involving relined and non-relined fiberglass posts. In total, 72 bovine incisors were cemented and subjected to push-out bond strength testing (n = 10) followed by failure mode analysis. The cross-sectional microhardness (n = 5) was assessed along the root canal, and interface analyses (n = 3) were conducted using scanning electron microscopy (SEM). Data from the push-out bond strength and cross-sectional microhardness tests were analyzed via 3-way analysis of variance and the Bonferroni post-hoc test (α = 0.05). Results For non-relined fiberglass posts, conventional resin cement exhibited higher push-out bond strength than self-adhesive cement. Relined fiberglass posts yielded comparable results between the resin cements. Type II failure was the most common failure mode for both resin cements, regardless of cementation protocol. The use of relined fiberglass posts improved the cross-sectional microhardness values for both cements. SEM images revealed voids and bubbles in the incisors with non-relined fiberglass posts. Conclusions Mechanical properties were impacted by the cementation protocol. Relined fiberglass posts presented the highest push-out bond strength and cross-sectional microhardness values, regardless of the resin cement used (conventional dual-cure or self-adhesive). Conversely, for non-relined fiberglass posts, the conventional dual-cure resin cement yielded superior results to the self-adhesive resin cement.
Abstract
Objectives This study was conducted to evaluate the mechanical properties of relined and non-relined fiberglass posts when cemented to root canal dentin using a conventional dual-cure resin cement or a self-adhesive resin cement. Materials and Methods Two types of resin cements were utilized: conventional and self-adhesive. Additionally, 2 cementation protocols were employed, involving relined and non-relined fiberglass posts. In total, 72 bovine incisors were cemented and subjected to push-out bond strength testing (n = 10) followed by failure mode analysis. The cross-sectional microhardness (n = 5) was assessed along the root canal, and interface analyses (n = 3) were conducted using scanning electron microscopy (SEM). Data from the push-out bond strength and cross-sectional microhardness tests were analyzed via 3-way analysis of variance and the Bonferroni post-hoc test (α = 0.05). Results For non-relined fiberglass posts, conventional resin cement exhibited higher push-out bond strength than self-adhesive cement. Relined fiberglass posts yielded comparable results between the resin cements. Type II failure was the most common failure mode for both resin cements, regardless of cementation protocol. The use of relined fiberglass posts improved the cross-sectional microhardness values for both cements. SEM images revealed voids and bubbles in the incisors with non-relined fiberglass posts. Conclusions Mechanical properties were impacted by the cementation protocol. Relined fiberglass posts presented the highest push-out bond strength and cross-sectional microhardness values, regardless of the resin cement used (conventional dual-cure or self-adhesive). Conversely, for non-relined fiberglass posts, the conventional dual-cure resin cement yielded superior results to the self-adhesive resin cement.
참고문헌 (37)
- Shafiei F, "Adhesion performance of a universal adhesive in the root canal : effect of etch-and-rinse vs. self-etch mode", PLoS One, 13, pp.e0195367~ (2018)
- Machry RV, "Effect of different surface treatments of resin relined fiber posts cemented with self-adhesive resin cement on push-out and microtensile bond strength tests", Oper Dent, 45, pp.E185~E195 (2020)
- Silva GR, "Effect of post type and restorative techniques on the strain and fracture resistance of flared incisor roots", Braz Dent J, 22, pp.230~237 (2011)
- Silva CF, "The influence of customization of glass fiber posts on fracture strength and failure pattern : a systematic review and meta-analysis of preclinical ex-vivo studies", J Mech Behav Biomed Mater, 118, pp.104433~ (2021)
- Rodrigues RV, "Influence of adhesive cementation systems on the bond strength of relined fiber posts to root dentin", J Prosthet Dent, 118, pp.493~499 (2017)
- Marchionatti AME, "Clinical performance and failure modes of pulpless teeth restored with posts : a systematic review", Braz Oral Res, 31, pp.e64~ (2017)
- Parčina Amižić I, "Bond strength of individually formed and prefabricated fiber-reinforced composite posts", J Adhes Dent, 21, pp.557~565 (2019)
- Freitas TL, "Effect of glass fiber post adaptation on push-out bond strength to root dentin", Braz Dent J, 30, pp.350~355 (2019)
- Leandrin TP, "Customized fiber post improves the bond strength and dentinal penetrability of resin cementation system to root dentin", Oper Dent, 47, pp.E22~E34 (2022)
- Jurema ALB, "Effect of intraradicular fiber post on the fracture resistance of endodontically treated and restored anterior teeth : a systematic review and meta-analysis", J Prosthet Dent, 128, pp.13~24 (2022)
- Hoshino IAE, "Biomechanical performance of three fiberglass post cementation techniques : Imaging, in vitro, and in silico analysis", J Prosthodont Res, 67, pp.103~111 (2023)
- Souza NC, "Relined fiberglass post : an ex vivo study of the resin cement thickness and dentin-resin interface", Braz Oral Res, 30, pp.S1806-83242016000100274~ (2016)
- Lins RBE, "The effect of individualization of fiberglass posts using bulk-fill resin-based composites on cementation : an in vitro study", Restor Dent Endod, 44, pp.e37~ (2019)
- Pan Y, "Surface morphology and mechanical properties of conventional and self-adhesive resin cements after aqueous aging", J Appl Oral Sci, 27, pp.e20170449~ (2018)
- Karakis D, "Effect of self and dual-curing on degree of conversion and crosslink density of dual-cure core build-up materials", J Prosthodont Res, 61, pp.210~216 (2017)
- Hitz T, "Are self-adhesive resin cements a valid alternative to conventional resin cements? A laboratory study of the long-term bond strength", Dent Mater, 28, pp.1183~1190 (2012)
- Roesner AJ, "Acid resistance of self-adhesive resin luting cements-changes in surface texture parameters and microhardness", Dent Mater, 38, pp.1376~1384 (2022)
- Wang C, "Enamel microstructural features of bovine and human incisors : a comparative study", Ann Anat, 235, pp.151700~ (2021)
- Pedreira AP, "Microhardness of resin cements in the intraradicular environment : effects of water storage and softening treament", Dent Mater, 25, pp.868~876 (2009)
- Grandini S, "SEM evaluation of the cement layer thickness after luting two different posts", J Adhes Dent, 7, pp.235~240 (2005)
- Gomes GM, "Effect of operator experience on the outcome of fiber post cementation with different resin cements", Oper Dent, 38, pp.555~564 (2013)
- Manso AP, "Dental cements for luting and bonding restorations : self-adhesive resin cements", Dent Clin North Am, 61, pp.821~834 (2017)
- Zorzin J, "pH neutralization and influence on mechanical strength in self-adhesive resin luting agents", Dent Mater, 28, pp.672~679 (2012)
- Faria-e-Silva AL, "Intra-radicular dentin treatments and retention of fiber posts with self-adhesive resin cements", Braz Oral Res, 27, pp.14~19 (2013)
- Moazzami SM, "Light conduction capability of different light-transmitting FRC posts", J Dent Mater Tech, 1, pp.40~46 (2012)
- Caughman WF, "Curing potential of dual-polymerizable resin cements in simulated clinical situations", J Prosthet Dent, 85, pp.479~484 (2001)
- Ramos MB, "Effects of curing protocol and storage time on the micro-hardness of resin cements used to lute fiber-reinforced resin posts", J Appl Oral Sci, 20, pp.556~562 (2012)
- Başaran G, "Microtensile bond strength of root canal dentin treated with adhesive and fiber-reinforced post systems", Braz Oral Res, 33, pp.e027~ (2019)
- Bell-Rönnlöf AL, "Transmission of light through fiber-reinforced composite posts", Dent Mater J, 38, pp.928~933 (2019)
- Haralur SB, "Light transmission of various aesthetic posts at different depths and its effect on push-out bond strength, microhardness of luting cement", Medicina(Kaunas), 58, pp.75~ (2022)
- Kim KH, "The effect of filler loading and morphology on the mechanical properties of contemporary composites", J Prosthet Dent, 87, pp.642~649 (2002)
- Karakis D, "Effect of self and dual-curing on degree of conversion and crosslink density of dual-cure core build-up materials", J Prosthodont Res, 61, pp.210~216 (2017)
- Lacerda FC, "Immediate and long-term microshear bond strength of resin-based cements to core build-up materials", J Clin Exp Dent, 13, pp.e1030~e1037 (2021)
- Farina AP, "Influence of cement type and relining procedure on push-out bond strength of fiber posts after cyclic loading", J Prosthodont, 25, pp.54~60 (2016)
- Santi MR, "Influence of inorganic composition and filler particle morphology on the mechanical properties of self-adhesive resin cements", Restor Dent Endod, 47, pp.e32~ (2022)
- Shimokawa CA, "Comparison between a bulk-fill resin-based composite and three luting materials on the cementation of fiberglass-reinforced posts", Restor Dent Endod, 48, pp.e30~ (2023)
- Aktemur Türker S, "Effects of dentin moisture on the push-out bond strength of a fiber post luted with different self-adhesive resin cements", Restor Dent Endod, 38, pp.234~240 (2013)